וידאו מעולה! 💪צודק קודמי, חסר סרטונים כאלה בעברית. 🙏 אפשר לוותר על המוזיקה או לחלופין להנמיך אותה כגובה הדיבור
@YoramPomerАй бұрын
היו לי מספר רעיונות. רק להחליש בזמן שאני מדבר, לוותר לגמרה על המוזיקה ואולי להסתפק רק בכתוביות. עדיין לא מצאתי את השילוב הנכון . תודה עבור המשוב הבונה והמפרגן.
@7up545Ай бұрын
@@YoramPomer תראה, הוידאו כל כך מעניין שאנחנו עוקבים אחרי מה שאתה עושה גם אם אתה לא מדבר, לפי דעתי לא צריך מוזיקה. אבל אם רוצים אז שהיא תהיה בווליום נמוך. אחלה וידאו💪 ואין ספק שבאנגלית התפוצה היתה גדולה יותר.
@YoramPomerАй бұрын
@ בהתחלה זה היה בלי מוזיקת רקע ( קודם צריך למצוא מוזיקה שאיננה מפרה זכויות יוצרים) , ואז בחלקים שאני לא מדבר, זה הרגיש שקט מדי , ולכן הוספתי את המנגינה . אופציה נוספת זה לדבר בלי הפסקה, אבל אני באופי יותר טכני וזה פחות מתאים לי. תודה עבור המשוב!!
@evdokimov88Ай бұрын
איזה יופי אלוף , חסר דברים כאלה בעיברית
@YoramPomerАй бұрын
. תודה על המשוב. ממש התלבטתי לגבי השפה. אין ספק שזה מקטין החשיפה. אבל זה גם מרגיש יותר נכון. תודה!
@Deathisnomore18Ай бұрын
What size is that wrench to disassemble? 0:27
@YoramPomerАй бұрын
@@Deathisnomore18 You need 36mm. But make sure that the edge is sharp and not curved because the contract area is very small. What I did is buy a good quality wrench, such as KS-Tools and removed the first 1/2 cm with a disk. This was so much cheaper than the original tool from Cannondale.
@Deathisnomore18Ай бұрын
@@YoramPomer thank you 👍👍👍
@davidturgeon20872 ай бұрын
I've worn a pair of Starck SH3007 for many years and I'm just replacing them this week --- with another pair of SH007's. The hinges are amazing. Because I'm short sighted, I like to flip my glasses ups on top of my head when I need to read fine print or d a delicate task. After many years wear, the hinges are as tight and flexible as they were when new. The only reason I'm replacing the frames is that the finish is looking a little worn, which is understandable due to their age and constant wear.
@YoramPomer2 ай бұрын
The hinges are absolutely amazing. Its a very smart design that is extremely reliable. In my case, the stupid optometrist place the glass via heating the frame and so it cracked. As expected, he didn't take any responsibility for the damage and said that the frame was old. What he didn't know and care was that nylon frames should not be heated like acetate before placing the glass.
@Hideme-m6x5 ай бұрын
yeah... a lot of fun video.. 😭
@sabinebracke65318 ай бұрын
Ganz tolles Video, man sieht schritt für schritt wie es gewechselt wird. Nur die Schrift mittig im Geschehen stört ein wenig
@YoramPomer8 ай бұрын
Danke, ich schätze Ihr Feedback
@ДмитрийСадоков-щ5г8 ай бұрын
What month was it?
@YoramPomer8 ай бұрын
Its the end of February. We had good snow conditions.
@E50HW8 ай бұрын
what is with music. and why? othervise thanks for video
@YoramPomer8 ай бұрын
Back then , music was a must, today its more about the spoken words. Thanks for your feedback.
@ANDREAPOGANCEV9 ай бұрын
Kako se otvara
@rjadventure681111 ай бұрын
Perfect service
@peternowak6086 Жыл бұрын
Speaker intall on a silcone 😂😂😂 this is first time ive seen something like
@xtp77135 ай бұрын
its just for vibrations
@1ramus1 Жыл бұрын
Very useful and helpful indeed. Thank You.
@lukasn.9399 Жыл бұрын
Hi Yoram, thank you for the video. Could you please specify which Ninja BB did you choose? I found this one wich sounds correct: Ninja PF30 BB 30mm? I hope to use it with my old 30mm spindle and crank. Thanks
@YoramPomer Жыл бұрын
Assuming you want to keep the existing crankset. You need a MTN 83-Ai FRAME (46 x W83) with CANNONDALE HOLLOWGRAM MTB CRANKSET (with 137mm SPINDLE), it is compatible with Token TF4630 + M83. Looking back, it was an opportunity to change to a standard crankset that opens a larger variety of products. But then you also need to invest in a new crankset, that I wanted to avoid at the time.
@lukasn.9399 Жыл бұрын
@@YoramPomer thank you for your reply, much appreciated! I hope you will make another video if you decide to change your crankset for another brand, because this whole crank arm AI offset on the f-si gives me headaches. I am running a hollowgram crankset (si/one, ck141...) on a 137mm spindle with a spider for a 2x11 drivetrain. I was planning to switch to 1x12 or 1x11 but could not figure out which crankset or sprocket would work. Is yours basically the same as mine but instead of the spider you run an oval chainring? And if, which one :) Thanks again!
@YoramPomer Жыл бұрын
@@lukasn.9399 AI is great, but is also a headache because it’s non standard. I moved to 1x11, which is so smooth. A 1-12 would have been a big investment that I couldn’t afford. The oval chainring that I am using is made especially for AI. And you should keep it this way or else the chain will keep falling. I can highly recommend the one I am using. It’s expensive, but also fun . absoluteblack.cc/cannondale-oval-direct-mount-chainring.html
@lukasn.9399 Жыл бұрын
Hi@@YoramPomer , thanks again for the information. the ring looks awesome. I will consider 1x12 for the next rebuild some time in the future :) This time I found the original replacement chainrings in an italian online store after searching the web for a week and talking to fsa in the USA.I have also ordered the token ninja form a polish online shop (token distributor). Very helpful seller. Happy riding!
@biboooooooooooooooooo Жыл бұрын
Thank you for sharing how you repaired it. By any chance, do you remember where you found a new seal? I am having the same problem and can't find it anywhere
@YoramPomer Жыл бұрын
The seal comes with the new heating element. I think that I ordered it from Amazon, but it could also have been from another online shop that sells original Meile parts.
@anketosi Жыл бұрын
Where can I find the heater in miele wkf131wps, front or back please?
@YoramPomer Жыл бұрын
I am not familiar with your model. In my model it was at the right side.
@muzixman2011 Жыл бұрын
replace it is cheaper than the tools and materials needed to do this repair, and save a lot of time
@wajehabusmor682 Жыл бұрын
היי ישלי גג 70מתר בטון ניקי אותו טוב אני יכול למרוח עלוו סיקה זה בסדר כמה חומר אני יצטרך
@YoramPomer Жыл бұрын
לא יודע לחשב, אבל צריך כמות של 2 שכבות כולל חומר שנספג בבד . במזג אויר חם הכמות עולה כי זה נעשה יותר צמיג. תתחיל עם השכבה הראשונה ולפי זה תדע כמה צריך לקנות לשכבה השנייה. בהצלחה!
@josebazoti5655 Жыл бұрын
Parabéns! Show
@Iazzaboyce Жыл бұрын
I have a W833 with 22 years of around 7 uses per week and still looks new. Only ever problem was a door seal (which we broke trapping towel in door) easy to replace. Now we have a heating problem sometimes getting warm sometimes seems not to have heated. I'm wondering if this is the element or the sensor or something else? I'm thinking just replace the sensor first. I would appreciate any advice.
@YoramPomer Жыл бұрын
I would try to replace the heating element because after 22 years it can only do good to the washing machine. You will also find lots of dirt down there, so that it will certainly improve the heating efficiency of your washing machine. Its hard to say if this is the problem. It can also be the sensor or even the electronics.
@Iazzaboyce Жыл бұрын
@@YoramPomer I replaced drain pump with a good used one, replaced motor brushes which were down to 5mm, replaced both shocks with new ones, replaced heating element (old one and drum interior like new as soft water area). Now machine runs well, but has rinse light rapid flashing. Rinse light was flashing before I started think it might be related to spraying switch cleaner around main control switch?? As this is the only thing I did. I would appreciate any ideas.
@YoramPomer Жыл бұрын
@@Iazzaboyce Did you try cleaning the entire drain system? Its so easy. You press the spring that hold the rubber in place and take it apart. The entire system needs to be clean. If this problem stays, than maybe you have a problem with the pump. Again - get it cleaned and make sure that nothing is blocking its rotation.
@kiryhara2 жыл бұрын
Te quedó para el orto pa
@TheAndiHa2 жыл бұрын
Thanks a lot - it took me quite some time to find a video which actually shows the disassembly of the heater of my Miele WKF110 (which seems to be very similar to your machine).
@gshschenodzji21852 жыл бұрын
did you really put the speaker with the soft rubber on the dirty ground pressing onto the rocks - wow :-) kzbin.info/www/bejne/b3qbmJqHi7F9i8k
@maszat15152 жыл бұрын
I plant to buy the same speakers in my octavia, what do you think of the sound quality? Is it better than the original?
@YoramPomer2 жыл бұрын
I added only rear speakers because the front ones are original. The sound has 2 disadvantages: The amplifier is not powerful enough to fully utilize the potential of the speakers. The door cannot take the low frequency properly and add unwanted vibrations But for the price, I am very satisfied:-)
@MrMpr27bk2 жыл бұрын
Where. Do I buy
@MrMpr27bk2 жыл бұрын
I'll like to buy a crank set for it but don't know the size to buy
@Rondoggy672 жыл бұрын
Pointless & stupid
@ylliblee50732 жыл бұрын
4 yrs in are you still using it yoram, should I buy one. And at least your tutorial shows 2 cold sources filtered and I’m guessing unfiltered, grohe videos are a bit vague around the pipework
@YoramPomer2 жыл бұрын
I am using this filter for over 10 years. During this time Grohe has changed the filter supplier and sent me a free upgrade kit so that I can start using the new filters. It’s a very reliable system with nearly no service. In my case the electronic counter stoped working, so I simply change the filter every 1/2 a year ( Google calendar reminder). I have no experience with the cold water or CO2 outlet. I only use it to provide room temperature drinking water.
@YoramPomer2 жыл бұрын
Technically, it’s 2 pipes leading all the way to top of the tap. One is for filtered and the other for none filtered water. The water in the pipes never mix, so that you always get what you want.
@ylliblee50732 жыл бұрын
Thanks for your reply’s yoram, I didn’t think all water would be filtered but also expected 2 pipes? But now I know 👍
@VanNguyen-kl5pu2 жыл бұрын
So what kind of frame are you using now? Can you tell me? Thank you very much!
@YoramPomer2 жыл бұрын
I have used many good frames since abandoning Alain Mikli . Try Lunor - This frame never fails.
@nuflash2 жыл бұрын
Great video. How did you remove the square black buttons for record select and source/tape from the switch post. I have tried to pull with more force than I'm comfortable with and afraid I will break the aged plastic parts. Thanks,
@nuflash2 жыл бұрын
No worries, got them off.
@YoramPomer2 жыл бұрын
You see in the video that there is a slider that locks the button mechanism in place - you just need to move it and all of the buttons in the row will pop out
@dumsbike2 жыл бұрын
Nice bike.....
@hawbir952 жыл бұрын
I have installed two rear speaker and tweeter both genuine part but now i feel the sound is bad weak bass before was better than now with two front speaker and tweeter can you help me what’s problem? Thanks
@YoramPomer2 жыл бұрын
Just a guess. Maybe your car music system doesn’t have the power to drive the new speakers. Try to set the sound of the system to play only from the front loudspeakers. This will help you isolate the problem.
@arsen41392 жыл бұрын
איפה אפשר לקנות את הבד הזה, ואיך הוא ניקרא אם אני הולך לקנות אותו בחנות, מה להגיד להם?
@YoramPomer2 жыл бұрын
תתקשר סליקה ישראל ותבקש סיקה לסטיק פליז 120.הנה לינק למוצר באתר של סיקה העולמי gcc.sika.com/en/construction/roofing/liquid-applied-membrane/sikalastic-fleece-120.html
@aurelpandelaxhe37212 жыл бұрын
What diametre have the key, te open the fork, the big one.
@adamselker2 жыл бұрын
This is super useful, thank you! Do you have the part numbers for the 16mm shaft clamps and seal kit?
@YoramPomer2 жыл бұрын
cannondale-16mm-shaft-clamps-kh135
@YoramPomer2 жыл бұрын
Hi Adam. I bought the seal kit from the Cannondaleexperts website. I am not sure that it’s an official Cannondale kit, but rather a put together list of items. cannondaleexperts.com/products/cannondaleexperts-com-cannondale-lefty-32mm-2-0-abbreviated-100-hour-seal-kit?variant=32132694933641
@adamselker2 жыл бұрын
@@YoramPomer This is exactly what I needed, thank you!
@glitchthecat50112 жыл бұрын
Lol
@aidavcomedy2 жыл бұрын
Got one of these the other day. Bit smaller than I thought, I’d think if you want to put mountain bike tubes into it the XL version would be best.
@YoramPomer2 жыл бұрын
Personally, I wouldn’t put a tube in such a bag - It’s a waist of space. I would either buy a tube holder that can be attached directly to that frame or simply twist the tube around the frame. Some years ago I made my tires tubeless. Since then I didn’t have a single flat. So consider this as one of the most important investment in your bike. This is also why taking a spare tube is hard to justify for short rides.
@aidavcomedy2 жыл бұрын
@@YoramPomer fair enough. I have a mini pump that I have strapped to the frame, so I’m putting the tube where you put the CO2 and things. Also mine is for a road bike so I don’t need as much space
@mohamdbder38502 жыл бұрын
מתאים לאיטום בית פנים כמו קירות בטון . או טייח , בלוקים ??
@YoramPomer2 жыл бұрын
זה יוצר ממברנה מגומי. מתאים רק לקיר חיצוני
@peterbayliss14842 жыл бұрын
Nice one 😎
@jasoncruzl85862 жыл бұрын
No.
@terryhari75342 жыл бұрын
I owned starck and wont buy them again. Hinge break in 3 months. Got replaced but was informed that the next one won't be covered eventhough warranty is 12 month from the glasses shop. I dont abuse or drop my glasses. Clearly manufacturing defect
@YoramPomer2 жыл бұрын
Same here. The idea of modern frame material is great. But it also needs to withstand normal daily incidents. My pair just split by falling from a city bench as I was resting after a morning walk. This was so extreme because it’s just a 40cm fall on the ground.
@yameraindia16452 жыл бұрын
Instead of bringing a tail light glass of another car,,bring it's original one...
@pakpukik2 жыл бұрын
שלום. מהו הבד הזה ששמת שם בין שכבה לשכבה? איפה רוכשים?
@YoramPomer2 жыл бұрын
זה בד לבד מיוחד של סיקה שמתאים לחומר בידוד 560. קונים את זה בכל חנות חומרי בניין שעובדת ישירות מול סיקה.
@pakpukik2 жыл бұрын
@@YoramPomer יש שם מסוים למוצר הזה?
@lamstib11 ай бұрын
רשת REEMAT או Fleece 120@@pakpukik
@АлексейЛеонов-ь6в2 жыл бұрын
Перебираю 33299. Требуеться замена уплотнительных колец на гусаке. В инструкции ничего не написано. А тут ваше видео, всё предельно понятно. СПАСИБО!!!
@qwertylowbubble Жыл бұрын
Замена уплотнителей помогла? Я разобрал свой смеситель, текущий в месте соединения излива, обнаружил там абсолютно целые уплотнители. Не могу понять, почему протекло.
@massadi22102 жыл бұрын
הי, מי מוכר את היריעות בכמויות קטנות?! מטר-2 מטר לא יותר?
@YoramPomer2 жыл бұрын
לא יודע. קניתי גליל שלם ואחרי שסיימתי השאלתי אותו לחבר שרצה לחדש את הגג ועדיין יש לי קצת עודף שבסוף גם השתמשתי. אם אתה עושה לבד, אז העלות של היריעות זניח שהשוואה לחסכון הכספי של להביא בעל מקצוע. אחרי שתסיים את הגד, תמיד אפשר לפרסם כדי למכור את השאריות ביד 2.
@arsen41392 жыл бұрын
@@YoramPomer איפה אפשר לקנות את הבד הזה, ואיך הוא ניקרא אם אני הולך לקנות אותו בחנות, מה להגיד להם?
@43SLOWJOH2 жыл бұрын
Will this process also work for old Lefty Jake? TIA!
@D4x4Bronc3 жыл бұрын
Not bad for a cheap guy
@mahachooev8943 жыл бұрын
Works great just as it should
@ady80973 жыл бұрын
Thanks for posting. I have the same one. The DAB radio recently stopped working though 😞
@YoramPomer3 жыл бұрын
Usually the mechanic components are the first to break. DAB is not one of them. As I understand, the Beosound 4 is not equipped with DAB+. This is why for my location it was never an option. Most of the time I use the AUX input connected to a streaming device.