I loved it when you said you use the blue bin to wash your kid in it! Pretty fun!
@ANTISHANTY3 күн бұрын
Thanks man! It actually works really well haha
@scottsherwood85553 күн бұрын
This trailer is perfect for what I want to do, plus it will carry my 2 ROKON motorcycles. I love your design.
@ANTISHANTY3 күн бұрын
Love to hear that! Thank you for watching. Those ROKON motos are pretty sweet! Would love to see some in our trailer. Feel free to reach out to [email protected] and we can discuss your ideal build.
@masterofnow17 күн бұрын
Have one for a 5'7" rambox. I have that 3500 with rambox on the megacab
@ANTISHANTY6 күн бұрын
Thank you for watching the video and dropping the comment, appreciate it. Unfortunately, the Rambox limit the ability to mount this system.
@jeremypriest40627 күн бұрын
I can have my 6 man tent up in less than 5 minutes, and it won't rock around like it's on a suspension system, and It cost $50.
@ANTISHANTY6 күн бұрын
That's awesome! There are always trade-offs out there, this product's are quicker set up time, quiet and solid in high winds, fully lockable, elevated off the ground, and insulated.
@ronfisher47517 күн бұрын
Finally a company focusing on useful longer beds not the tiny short beds most rugged canopy builders have!
@ANTISHANTY7 күн бұрын
Thank you! Appreciate the comment and for watching the video!
@adjusting2traveling4007 күн бұрын
looooollll fully😂 loaded $21,400.00 camper shell
@ANTISHANTY7 күн бұрын
Thanks for the comment! Appreciate you checking out the website and using our builder to build one out!
@jeepninja113 күн бұрын
I bet its not loud at all at highway speeds
@ANTISHANTY13 күн бұрын
Definitley not as loud as a Jeep at highway speeds. 😉
@jeepninja112 күн бұрын
@ANTISHANTY I'd need to see that for myself. That overhead cantilever design looks like a wind trap.
@phattdaddy297414 күн бұрын
almost $20k as shown, FTS! I'll stick with my 8' Lance truck bed camper for my 7.3, my lance would be easier to remove when needed too.
@ANTISHANTY8 күн бұрын
Thank you for watching, appreciate the comment! Building high-quality, built-to-last products right here in the U.S. comes with its costs.
@phattdaddy29747 күн бұрын
@@ANTISHANTY ur welcome, I know how it goes!
@CAROBIN9814 күн бұрын
How do you prevent water from getting in if its raining when you want to pop up the sleeping area? Do you make a rain cover?
@ANTISHANTY14 күн бұрын
Great question! Set it up fast or wait for the storm to blow over. The extra security and protection from rain and wind with all hard sides is worth the brief rain during set up.
@gregmgm0615 күн бұрын
That's the nicest shell I've seen! Great in the wind, no fabric flapping. Also, great presentation......loved the bloopers! PS, thanks for putting pricing on your website. So many companies hide their pricing.
@ANTISHANTY14 күн бұрын
Thank you for watching and thank you for the feedback! Really appreciate the comment.
@bretthines689315 күн бұрын
I can’t even imagine the price of this thing…
@ANTISHANTY14 күн бұрын
Appreciate the comment! Surprisingly enough, there are some products out there with soft tent sides for about the same price. Building extremely high-quality products right here in the USA has its value.
@MR-xc3sw17 күн бұрын
I dont get how thats a sleeping area.
@ANTISHANTY14 күн бұрын
It's about a full-size mattress sized sleeping area once the top is popped open.
@MR-xc3sw14 күн бұрын
@ANTISHANTY yeah I saw that after you get both floor panels in place. But then you can't get out without moving a panel and a mattress. Cool idea but more of a novelty than a comfortably sleeping area. Maybe if the entire roof raised up to allow standing upright with a folding bunk over the side cabinets just a cabineton one side idk. . I realize it is many things in one and that always means sacrificing something.
@ANTISHANTY14 күн бұрын
@@MR-xc3sw Great comment. We are developing a new panel system that will actually allow you to get up and down without having to move panels. Stay tuned.
@deanjollow289217 күн бұрын
Got something that fits my 1985 dodge d100? Ball park price? 🇨🇦 Alberta. Thx
Without having looked at pricing these seem like a great idea in the "wedge RTT' truck shell option. On my 09 Tacoma I've had a Flippac, FWC Finch, and an extra high Tradesman cap/shell. The latter being my favorite due to functionality. Specifically the made to order side storage cubby. the cubby is the perfect camp kitchen. I sleep in the back of the truck. Even with the taller cap it still feels a bit cramped. I hope this company survives the market with so many wedge RTT companies making this type of option. This looks very functional. The bloopers are hilarious.
@ANTISHANTY17 күн бұрын
Thank you for watching, really appreciate the comment! We hope so being the first hard-sided wedge to the market. Haha, glad you liked them.
@BillSkullion18 күн бұрын
It's great to see you answer questions, and I apologize if someone has already asked this. Do the windows up in the bed area not have bug screens? There was no mention of screens in the video. Sorry, but that would be a deal breaker for me.
@ANTISHANTY17 күн бұрын
Great question! We getting the bug screens dialed in and hope to launch them for 2025. Thank you!
@BillSkullion17 күн бұрын
@ANTISHANTY Thank you for the fast reply. That's great news!
@BillSkullion17 күн бұрын
@ANTISHANTY My only other comment would be that I'd love to see an option for the back door of the tent to open sideways. Then, the deck could be used as a drone launch.
@xrstopherpopp12018 күн бұрын
No mattress in the tent? WTH?
@ANTISHANTY17 күн бұрын
We like giving our customers options to what best fits their lifestyle. Not only is the RTD a sleeping space, but it is also a a cargo space. On a day to the ski resort, you can load skis and boot bags up in the RTD. There are also many outdoor mattresses that fit great in the RTD, like Exped or Hest. Some customers prefer one of the other. Customers have the ability to choose for themselves.
@TheBeingReal19 күн бұрын
This is one of the better ideas I have seen for the purpose.
@ANTISHANTY17 күн бұрын
Awesome! Thank you for watching and for the comment.
@mikeklinger171221 күн бұрын
Window here window there but not a screen to be seen! I see nothing to keep the Minnesota state bird the 🦟 mosquito out!
@BillSkullion18 күн бұрын
I was wondering the same thing. That's a deal breaker for me.
@ANTISHANTY14 күн бұрын
Thank you for comment! We are getting the bug screens dialed in and hope to launch them for 2025. We may need to fact check you on the Minnesota state bird haha.
@hoagiesherlin773221 күн бұрын
Bro that's baddass
@ANTISHANTY17 күн бұрын
Thank you man! appreciate that!
@hendo33721 күн бұрын
It's pretty cool, I would really want some screened windows, in the desert that's not a concern but, insects in most areas are terrible and you can get away in most northern places with a few windows open instead of worrying about powering an AC unit. I definitely like what are doing with your product.
@ANTISHANTY17 күн бұрын
Thank you so much for watching and for dropping the comment. We are working on our soft good manufacturing and dialing in window screens.
@Ripsaw_Creations22 күн бұрын
Merry Christmas fam 🎄😎
@ANTISHANTY17 күн бұрын
Thank you! Appreciate it! Hope you had a good one and Happy New Year!
@Ripsaw_Creations22 күн бұрын
Do u make one for a 2013 Silverado?😊😎
@Ripsaw_Creations22 күн бұрын
Can I get one for my 2013 lifted Silverado?
@Ripsaw_Creations22 күн бұрын
Do u make one for a 2013 Chevy Silverado???
@ANTISHANTY17 күн бұрын
Looks like Chevy made some significant bed changes in 2014. We would have to double check on the 2013. Email us at [email protected] and we can discuss more. Thank you.
@Ripsaw_Creations24 күн бұрын
Do u make them for 2013 lifted Chevy Silverado???
@Ripsaw_Creations24 күн бұрын
What about on a lifted Chevy 1500 ? I have one and I'd put this on there
@richardhenry196926 күн бұрын
Man that top hard side tent would be perfect for my van build. Can I buy just the rooftop tent part?
@ANTISHANTY24 күн бұрын
You bet you can! It is called the RTD and we have it in a Slim version and a Cargo version. Check them out on our website.
@richardhenry196924 күн бұрын
@ANTISHANTY thank you that's awesome. Unbelievably it cost more money than just adding a hightop. An not just a little. I could literally have a factory install the hightop and have $5000 left over. Markup must be huge.
@richardhenry196927 күн бұрын
I'd like that hard top for my van. That would be perfect on my chevy.
@ANTISHANTY24 күн бұрын
That would be awesome! We sell them for vans with some materials to trim out the passthrough you create.
@daneboro684727 күн бұрын
Merry Christmas and Happy New Years to the Antishanty family🙏
@ANTISHANTY24 күн бұрын
Thank you! Appreciate it!
@TrishaZambrano27 күн бұрын
Merry Christmas to you too
@ANTISHANTY24 күн бұрын
Appreciate it!
@malonlabe880627 күн бұрын
I have a 2000 F350 with an 8 foot bed. Not much in today’s market for me. Would this fit?
@ANTISHANTY24 күн бұрын
Great question, it could! Reach out to us at [email protected] and we can have you take some specific measurements to make sure. Thank you!
@_Spacecraft27 күн бұрын
I'd love to see a bill of materials and labor with costs for one of these to see how close it comes to the $15k price tag. Overlanding / camping stuff has gotten so expensive it's unreal.
@ANTISHANTY24 күн бұрын
Appreciate the comment! Surprisingly enough, there are some products out there with soft tent sides for about the same price. Building extremely high-quality products right here in the USA has its value.
@TheBeingReal19 күн бұрын
Pretty unreasonable ask. Even more foolish to give out. It is a business and they need to make a profit. If one lives in a manufacturing world, a general rule is 40% gross margin works well. Depending on the market, it can be +/- of that.
@_Spacecraft19 күн бұрын
@@TheBeingReal Do you own shares in this company? Is it unreasonable for consumers to look into if they're being ripped off? I don't expect them to give me this information, not for one second. But I want other people to think about if a base price of $15,000 for this is actually reasonable. At the end of the day people are going to finance any stupid thing, so they'll probably make some sales. It's just unfortunate that these companies taking advantage of that situation means others will as well, and we'll never see equipment like this at reasonable prices.
@ANTISHANTY14 күн бұрын
Appreciate all of the comments. We can guarantee you that in order to operate, manufacture, and offer these types of products, pricing is extremely reasonable. Honestly, the price should be higher, especially when you compare the product to some of the soft-sided options out there.
@awfulwarlock9128 күн бұрын
I'm not even in the market for this product, but damn this is cool. Makes me wanna buy a truck again lol.
@ANTISHANTY24 күн бұрын
Thank you so much! Really appreciate that!
@nvrmor02329 күн бұрын
Are you going to sell the cap alone in the future?
@ANTISHANTY24 күн бұрын
You bet! That is the plan!
@momitch62Ай бұрын
@4:50 you are the perfect chill guy to demonstrate this function properly for us
@ANTISHANTY24 күн бұрын
Haha, thank you, appreciate it!
@cleanworker5922Ай бұрын
Do the windows have screens?
@ANTISHANTY24 күн бұрын
Screens are in the works and are getting dialed in.
@cleanworker592224 күн бұрын
@@ANTISHANTY Nice, a lack of screens would be the only downside I see to your dwelling! I'll keep an eye on them!
@paulbo7835Ай бұрын
Does the front part that extends over the cab clear the Prinsu rack on the Tacoma?
@ANTISHANTY24 күн бұрын
Great question. I believe it does clear the Prinsu rack, not the Prinsu Pro Rack though.
@paulbo7835Ай бұрын
This is now the only setup I want. I hope i can afford one before my expedition from the Wasatch to the Alaskan Arctic this coming summer, and again to the the Canadian Arctic the following summer. Still a chunk of money that I don't know if it's possible. But i will do all i can to try and make it happen!
@ANTISHANTY24 күн бұрын
We would love to build you one if it all works out! Those sounds like some awesome trips! Reach out to us at [email protected] or text us on our website and we can chat more.
@azpunkboyАй бұрын
Need to see one of these 4XD’s in person. One thing I missed seeing while up there. Not sure if you had one built or not.
@ANTISHANTYАй бұрын
Might have been out and about.
@carltrano1325Ай бұрын
Nice setup, bet it is insanely expensive. Yup not worth it’s way to expensive.
@ANTISHANTYАй бұрын
Appreciate the comment! Surprisingly enough, there are some products out there with soft tent sides for about the same price. Building extremely high-quality products right here in the USA has its value.
@divadtineb21Ай бұрын
TJ Miller sells these now?
@ANTISHANTYАй бұрын
Yeah man! Isn't that wild?
@twistnshout3031Ай бұрын
That upper sleeping section looks cheesy and small. For the amount of space you have to work with id rather see a nicer tent up top. Still a sick rig.
@ANTISHANTYАй бұрын
Appreciate the comment! The upper sleeping section (Roof Top Dwelling) is 86″ x 52″ interior sleeping dimensions, all hard-sided and insulated. What tent did you have in mind?
@twistnshout3031Ай бұрын
@ANTISHANTY maybe not a tent but if the whole thing lifted up instead of a clam she'll for more head room would be a sick design. Especially with hard shell walls. If you could figure that out it'd be the only thing on the market like it.
@richardcarby2371Ай бұрын
Does this come in a 6.5ft bed without the camper on top.
@ANTISHANTYАй бұрын
It does come in a 6.5ft. bed option, but the camper on top is included. It could potentially be removed and replaced with a roof. But the shell would be taller than the cab by a few inches. Is that something you would be interested in?
@mikesnifferpippets3733Ай бұрын
Looks like a great product. There isn’t too many companies supporting long bed trucks which is what mine will be (if ram ever launches the 2025’s). With that said, I can appreciate changing the typical layout to something no one else is doing. However, for me I’d prefer a pop up portion that covers the entire bed length as I’ve considered mounting a rack/tray on the cab roof… OR, maybe just the topper without any tent setup. For me, the rear tray isn’t as important. Very unique though. Subscribed for new videos.
@ANTISHANTYАй бұрын
Thank you for dropping the comment and sharing your thoughts, really appreciate it! A full length pop-top would be rad! A full topper would be a faster turn around if you are interested. Thank you for subscribing!
@davidmerkel1874Ай бұрын
Very well thought out, great presentation
@ANTISHANTYАй бұрын
Thank you! Really appreciate that!
@rossaltman4029Ай бұрын
Fall River
@espeescottyАй бұрын
Nice! I wish you guys lots of success with these. They look like quality units. 🤠👍
@ANTISHANTYАй бұрын
Thank you! Really appreciate that. High-quality is what we are all about.