Hello I have come across your video while trying to figure out logic, but odd thing is I cannot figure out how to remove the logic, it is stuck where I place it. there is no hint on how to remove, is it just gone for me?

This is great! :)

Interesting concept. Well done. Next challenge: rewrite the script to use the batch-write option so that you don't have to address them individually.

Your in Kansas haha

I know its been a long time since you made this video but how can I apply this to a chain of Arc furnaces without having to repeat it for each? I assume a batch writer and a memory chip but im not quite sure how to manage that properly

What is the chip in it's head used for? Does it do anything or is it just a requirement to have, since we program it from an IC housing with a transimiter?

This video did amazing things for me. I watched it a while ago and I'm not sure if one dis account but I want to say thank you bc it allowed to to construct an oxygen leak segregation/partitioning protocol that allowed me to automatically close doors when a leak occurs in certain parts of my base to save my crops. Learning ic10 from you and the wiki made this possible and it has been a lifesaver so far

on the previous vid, what did you do with the pipes on the output of yhe volume pump

FINALLY, that's how you display an item. Holy crap already...

Can you record a new guide on how to program aimee. Every prodanik is not up to date and does not work

I have a question, why did u need to build all different kind of ice crusher? Why can't u just build one crussher and link the output to ur main pipe, ur filtration will do their job.

Why would you just not break the power circuit with the switch like any normal person 😂?

Base is looking good

Wish i could build along

Could u upload your save file 🥹

I just watched someone try to land the rocket it didn't go so well 🤣😂😂😂

Hi, I followed your steam guide, got everything setup, and it works, kinda. It's making like 400 steel and thats it. The amount led doesn't decrease at all. It's gone through all my iron and coal, and not made anything else. Any ideas where to start looking to find out whats going on?

The footpring of the IC housing is perfect to put them in long rows side to side - and you can even decide if you want to but a logic network on the Data-port and a seperate power network in. I like them very much, and do even a lot of menial stuff with one of them, rather than a bunch of logic chips. Also: You can label IC Housings as well as IC Chips - which I highly recommend.

I wish I could hear this, this is exactly what I am trying to build rn

Any progress on this final script? I'm trying to learn this IC 10 stuff as an introductory language and I would love to read your comments on this code as soon as I can! Great work.

Привет! Ты можешь подготовить топливо "несколько" быстрее, просто поставь большой бак, нажми F3, введи atmos thing - это покажет его идентификатор если подойти вплотную. Затем двумя командами addgas Oxygen IDбака обьём и addgas Volatiles IDбака обьёмх2 ты получишь готовую смесь с температурой 20 по цельсию. Это делается куда быстрее чем ставить и прикручивать СТОЛЬКО баллонов. А наполнив большой бак 50000 oxygen и 100000 volatiles ты сможешь заправить далеко не одну ракету.

Accent og skills minder mig om min onkel, absolut legende! Fin vid takker!

Wonderfull! Thank you very mutch! Good video! thumbs up!

Suggestion to make your welding vehicle better. Make a counterbalance on the front of your vehicle. Example put a battery on the front it's one of the heaviest blocks.

Thank you, this helped. Ive used the output pressure instead of measuring the tank itself to do the same thing. And a LED with different colors instead of just a flasing light.

Sir I believe the d0 was labelled cable analy......just saying its perfect none joke, joke

Here some shortcuts that will better your quality of life : - Right-Click on a construct will put everything needed to finish the build in the build planner - Middle-Click on a container will transfer every object present in the build planner - Alt-Left-Click on a Container will empty your inventory toward the Container

I'm loving your play through. I've learned so many things I never new about the game. It's awesome you post on the steam workshop too. If you ever get the chance It would great if you could post your lets play world on the workshop too. Even if the series isn't finished, it would be helpful to see the base for myself to learn from.

The english want always great, but its not easy when its not your first language. And none of us came here for a language lesson 😂. The IC10 tutorial was absolutley great, a fantastic introduction. Thank you 😃

recently i tried to program an Aimee, but failed. i'm not that good as you with MIPS. i got her to walk from here to there and back. I like the functions in your code, i should have done more of those functions by myself. But the greatest downer was that Aimee is constantly bugging around, glitching INTO frames, and so on. She is kind of useless and annoying. I dont think that i'll give her a second try.

∆v is "Delta V" which means "change in speed". Basically rocket speak for now much you'll need to burn your engine to go somewhere. Distance is irrelevant because rockets can coast indefinitely, so you can think of ∆v as the amount you need to change orbital height and direction. In real rockets, the actual amount of fuel implied by this varies according to the weight of the rocket, cargo, and the fuel itself, which changes over time, but I've no idea how Stationeers is modelling this stuff.

damm dude your coding is crazy

didnt you already set up rockets in a past episode?

Hey I just noticed your fuel mix is other way around 😂 you have 2 vol for 1 ox, it should be 1 vol for 2 ox instead

Any chans that you could upload your code to the workshop as the original code by Barsiel only seems to include the code thats on the second IC?

Thank you for your Videos. I have some questions. 1. Downloaded you code v2 from Steam. But I always get alarm 1. the Aimee looks like it works but the doors will not open again for it and it ends up trying to go trough the closed door. Has something changed with a update? I have named everything equal to your set up, only changed to my XYZ. 2. If i switch of the switch, i get error code. 3. Sometimes the bot clips inside my base as well. Probably game related.

I've learned that in order to speed up the process, the filters machine should be directly connected in parallel, basically the main pipe feeds the filters directly, then the main pipe makes a circle from the last to the first, so all mol are taken. Keeping in series as you done, the last machine will wait for its gas when all machines before have done their job, slowing down the whole process. It should be better to use a Pressure regulator at 55-58Mp so the Tanks don't exceed their limit due to the pump that never stops. On top-right of the filter machine there's a small opening for IC chip, if programmed well it can stop filtering and advise when filters needs to be changed, customizing a blinking light when filters have been fully depleted.

Looks amazing, Question: is better to generate the fuel mix on the fly piping Oxygen and Volatile OR to prepare a fuel tank at the source piping fuel only to the rockets?

This doesn't work for me in the IC box. What is the Swift button on the Ic chip. I get an error on line 97

The Danglish is strong with this one, but I learned a lot, thank you ^_^

Really enjoying this series and the way you have it staged as the crash. With the many many red dots all around you I might have tunneled into the mountain next to your frozen lake to make a more defensible base. I believe what you found with the neutral signal was a crashed ship, part of one of the Vanilla Planet mods you are using. Might think about an ore detector for the Bug if you are going to keep it around for long.

Another good way to start a small grid vehicle is to use either a large grid connector, hinge, or rotor. With a connector facing up you can drop a small grid connector on top of it, and you can lock it in place and build off the new connector. With a hinge or rotor you can remove the end part and replace with a small grid head and build off from that. The benefit being that your small grid that you're building can now charge off your large grid.

my rockets always crash when thy are landing need some help if build the same as yours in this vid need some help

my rockets always crash when thy are landing need some help if build the same as yours in this vid need some help

The logic in Stationeers looked so intimidating after seeing what people do with it. After watching your video it all looks very intuitive and approachable. Thanks for showing me around logic controls.

Note that the little switch says passive because that's what it will set it to if you click on it. (The Stationeers UI is really weird like that.) Mousing over the middle of that transmitter gives a tooltip saying "Active as Transmitter Test." That's an active transmitter, sending out data. The passive ones are receivers.

I really enjoy your vids. New member of your community for sure!!

Oh no!! 10:47 That would have been the perfect place for a fuse, should you choose to group your electrics.

Try the centrifuge with nitrous, thats nice ;)

Your code is not that right, because the filtration WILL work, if one filter is at 0%. so the and is not that great, because the filter stops if ONE is at 0% ;)