3 ай бұрын
4 ай бұрын
4 ай бұрын
4 ай бұрын
5 ай бұрын
6 ай бұрын
7 ай бұрын
7 ай бұрын
8 ай бұрын
Пікірлер
@user-kq4nl4su5z 6 күн бұрын
4 puntos😕
@DennisDIY 6 күн бұрын
😂
@TwentyEightySeven 9 күн бұрын
9 Euros is a good price but here in the UK it’s 15 which is a bit expensive for something so basic.
@DennisDIY 7 күн бұрын
Yeah price there are a bit different
@cone6052 15 күн бұрын
The whole set of rivet nut it may cost you less than $12 now.
@DennisDIY 12 күн бұрын
Good price yes, I also have one around that price
@doodzomething1568 16 күн бұрын
One of the worst angle grinder I've ever owned. I do not recommend it to anyone!
@DennisDIY 12 күн бұрын
The trigger is not working fine, that's why I do not use it anymore
@katefox7692 26 күн бұрын
I also don’t understand how to attach the battery. The unit I have has a cylindrical hole in the handle but my battery is like yours??
@DennisDIY 25 күн бұрын
The machine is not connected to the Lidle home app only the battery I use is ready to connect. I jus show the battery is compatible with the machine you can only connect the battery and not the machine to the home app
@raymondharrison1425 12 күн бұрын
Hi Kate, sounds like you have the 12 volt version. This is the 20 volt version, therefore you require 12 volt battery and 12 volt charger! Cheers😊
@katefox7692 26 күн бұрын
What do you mean connect with Bluetooth to the battery? Connect it to what?
@DennisDIY 25 күн бұрын
The X20v Team Battery is compatible with the machine, a Bluetooth battery has no value for the machine
@nilsfrahm1323 29 күн бұрын
The battery circuit seems strange to me. The liion cells would normally just be connected to output, without any transistors, because during heavy use, current goes very high, more than 20Amps and you would need very large heavy duty transistors. They can be used for charging circuit, of course, but this is not in use when running the tool, only when battery is in charger. Thus makes no sense to overheat and melt the solder on those components when running the tool. Unless the motor needs 18V or 42V and they used a 12V battery with components to increase the voltage, which is not good design.
@DennisDIY 29 күн бұрын
Very well. Explanation, thanks,
@pawelodz8050 Ай бұрын
Usb C doesn't work as it should . Instead of 15W it gives 1w😂 💩 Product 💩
@DennisDIY Ай бұрын
Heard that before, works fine here only no fast charging
@Thomas-vg6do Ай бұрын
Die nietmutter ist ungleichmäßig gezogen und damit Schrott!
@DennisDIY Ай бұрын
😂 Echt
@nebuloso6527 Ай бұрын
I recently bought this same Parkside Performance 12 volt screwdriver, but as a complete kit 2x 12v 2A batteries, 1 charger, a kit of normal drills, a kit of wood drills and a kit of screw adapters all inside the screwdriver bag for 72 euros It wasn't cheap but at least I didn't need to buy anything else, the only thing I would like was instead of 2x 2A batteries I would like it to be one 12v 2A and one 12v 4A because I've seen in other videos that the 12v 4A one gives a extra performance because the energy drop during periods of effort is smaller in a 4A battery and also that with a 4A battery you have 48W of power in the screwdriver and with a 2A battery you have 24W of power
@DennisDIY Ай бұрын
Nice to have a complete set, I haven't test a 4AH yet. Thanks for you comment. I will see if I can get a 4ah as Wel. I really like the small size of those machines, some extra power is welcome, but I do think it's really strong already with the 2 AH.
@nebuloso6527 Ай бұрын
@@DennisDIY well, it would actually be interesting to put a battery with more capacity to see if the difference in performance would be noticeable in the different devices, especially when there are 3 types of 12v batteries and 3 types of 20v, with a borrowed 12v 4A battery I was able to conclude that it seems give extra performance but I haven't tested it yet with a 12v 5A battery, I wonder if it would give a little more performance, it's a strong device with a 12v 2A battery but at some point the need for a little more power appears, for example in my tests with a 12v 2A battery I was unable to remove a rusty screw from an electric scooter but with the 12v 4A battery I was able to remove it
@DennisDIY 20 күн бұрын
True
@wtfisthiscrap Ай бұрын
Hi! Good vid, thanks. How long can it last with a 4 amp battery?
@christianrobertadzic9321 Ай бұрын
Hmmm. Is this machine safe to use? What if the machine drops out of my hands during the cutting? Will it turn off or I have to use a jack hammer to turn it off? 😅
@DennisDIY Ай бұрын
If you hold de button and let loose it will turn off
@macha.h Ай бұрын
Does it work on insta360 x3?
@DennisDIY Ай бұрын
No only in usb C phones
@humboldhugoo Ай бұрын
this crap died after four cuts of wood 30mm diameter.
@DennisDIY Ай бұрын
Same here, the second one I received worked without problems
@marB84 Ай бұрын
Duidelijke review. Hoe lang duurde het ongeveer om die kruiwagenband op te pompen?
@DennisDIY Ай бұрын
Duurde niet heel lang, exact durf ik even niet te zeggen
@henriknielsen9674 Ай бұрын
You can pull the sword to keep the chain tight , while locking it in place . My chain is definitely not that loose
@DennisDIY Ай бұрын
No, it's an automatic spanner, it comes. Loose every time, normally this works with a screw and not with a coil spring.
@henriknielsen9674 Ай бұрын
@@DennisDIY when I unscrew the red lock, then the sword can move as you say, but if you pull the sword while tighten the red lock, then the sword is totally fixed.. I just tested to be sure, the automatic spring to stretch out the chain, is not strong enough on its own and the chain will come loose. Just apply a small pressure on the sword while tightening it completely
@DennisDIY Ай бұрын
It is just, not a proper way to lock the blade. I prefer a screw
@dijanabrkic5167 11 сағат бұрын
@@DennisDIY Yes it is. I just bought one. Did what he said, while tightening the red lock, pull the sword a bit and hold it. And chain will be tight.
@Bettychen-cu5kt Ай бұрын
For the price it really has very good features.
@DennisDIY Ай бұрын
It's a great laser
@Angel-TCCrafts Ай бұрын
Is the parkside lidl clmpressor of max 10 bar oke to use with it?
@DennisDIY Ай бұрын
As long you can adjust the pressure,. Yes
@Angel-TCCrafts Ай бұрын
@@DennisDIY oke. Thank you
@DennisDIY 20 күн бұрын
Welcome
@stasyspalaikis2295 Ай бұрын
I want to bay.
@stasyspalaikis2295 Ай бұрын
I want to bay.
@akierum Ай бұрын
This tool reductor quality is so bad I returned 2 tools because it was so loud that it's unusable.
@DennisDIY Ай бұрын
I have used Iitmany times, no problems, only now I have the 20v range and that one has more power.
@akierum Ай бұрын
@@DennisDIY Finally got 4th unit that works properly, nearly silent on speed4. LiDL Quality is very very bad.
@DennisDIY Ай бұрын
Here no problems
@whomadethatsaltysoup Ай бұрын
Good demo of this versatile little gem. I've already bought other tools in the 12v range: the drill/driver, planer, and jigsaw. The planer is excellent, the driver does what you'd expect, and the jigsaw is fine for anything up to 12mm. I managed to pick up all three with 10 percent off, and a further reduction on the drill/driver of 30 percent, as someone had opened the box and pinched the toffee drill bits that should have come with it. Like you say, for under £20 it would be rude not too.
@DennisDIY Ай бұрын
Nice, always wait for the offers
@petelike2024 Ай бұрын
I bought it it's just terrible it doesn't do its job
@DennisDIY Ай бұрын
Aliexpress quality
@hawardgrey3630 Ай бұрын
Mine on full charge, the brightness after less than 2 minutes of usage drops to below 50% of its initial brightness Is it ok?
@DennisDIY Ай бұрын
That's not normal, the orange one I use it for a long time, the color is a bit different but work. Fine
@hawardgrey3630 Ай бұрын
@@DennisDIY dear mine is the parkside I just want you to check your parkside too if its the same let me know
@DennisDIY Ай бұрын
It's mentioned on the back should work for hours
@edfort5704 Ай бұрын
Would have been nice to mention the ty[e of metal that was. Probably steel, but not 100% sure.
@DennisDIY Ай бұрын
Steel
@pmaly1980 2 ай бұрын
I see that the spring tensioning is not so perfect, during your cutting you can see a very loose chain on the lower part of the bar.
@DennisDIY 2 ай бұрын
Yeah that's why I mentioned its better to have a screw to tighten the chain. But it works fine for the rest
@BurtReynoldstash Ай бұрын
It does have a chain tension screw. It’s behind the bar.
@DennisDIY 29 күн бұрын
No it has not, it a spring and it's not posible tot tighten it up
@farhadfadayi7389 2 ай бұрын
thanks for video. subscribed/liked. one question. I've bought a PARKSIDE Stille compressor 1500 W 24L, and this compressor is Oil free. but do I need to buy this Air filter regulator & lubricator ? actually why and when I need to buy this? thanks in advance
@DennisDIY 2 ай бұрын
Yes some tool need Lubrication like a Stapler for example. On the other side you do not want Lubrication ona paint sprayer. You can lubricate using this tool. But for example, you can give a tool also a drop of oil now en then while using it
@OnlyVinsDePodcast 2 ай бұрын
Good that you mention the ability to redirect the air, thanks!
@DennisDIY 2 ай бұрын
Thank for the reply
@KissmyBasss 2 ай бұрын
Sweet! Trying this for trolling motor mount, the tool is having problems.
@DennisDIY 2 ай бұрын
Is it,🤔
@KissmyBasss 2 ай бұрын
The tool I have is having problems
@DennisDIY 2 ай бұрын
Maybe try the gun or the tool I used in the other video
@Kreacher1974 2 ай бұрын
Just bought one, waiting for it to come in
@DennisDIY 2 ай бұрын
Very handy
@Irish134 2 ай бұрын
Yay,thank you so much for this review sir❤
@DennisDIY 2 ай бұрын
Welcome
@xinixxagnix201 2 ай бұрын
If you go spraypaint, only use a moisture valve filter.
@denkarper 2 ай бұрын
Or just close the Lubrication oil Regulator. You can set it to zero
@DennisDIY 2 ай бұрын
True
@myshitonyoutube 2 ай бұрын
Do you only use this with tools that needs lubrication? I use air a lot to tires and blow away water and dirt from stuff and I guess you don't want this thing connected? I bought it because the regulator on my compressor is broken. I think I need to return this regulator.
@DennisDIY 2 ай бұрын
No, If you don't want Lubrication you can close it
@chrismergatacelo6869 2 ай бұрын
Was looking for better review and sample output. Thank you sir! 🙇♂
@DennisDIY 2 ай бұрын
Welcome
@montrel587 2 ай бұрын
can it be flicked open like the milwaukee fastback?
@DennisDIY 2 ай бұрын
I'm not sure, only this is not a very good quality tool
@nadir3D 2 ай бұрын
can you use this mic on a PC? to conect it to OBS for live straming?
@DennisDIY 2 ай бұрын
Only to the usb of your phone, sorry
@pascalblatta3111 2 ай бұрын
Ma la catena era troppo lenta, rischi che usciva dalla guida!!!
@DennisDIY 2 ай бұрын
Yes true , it is a self tightening chain so can't do anything about it. Normally you can tighten it up with a screw. To bad it hasn't this option.
@dijanabrkic5167 11 сағат бұрын
Because he doesnt know how to tighten it
@ohcrap3263 2 ай бұрын
I use a lot of these on custom vehicles. I use a HUK hydraulic tool. Pricey but it is small and fits almost all applications.
@DennisDIY 2 ай бұрын
Yeah I they work way more easy and fast of course.
@defresh1954 2 ай бұрын
Works better if you can hold the insert itself, IF you don't have the tool
@DennisDIY 2 ай бұрын
I know, it just shows a way, I to have a Tool also and a rivnut gun. This also shows the hole has to be the exact size 😂
@funkeybikemonkey 2 ай бұрын
Youre routing the wrong way. They only cut in one direction dude. Left to right coming from the top looking at the piece and right to left in a table. Its jumping bevause you're a bit crap at it. If the tools not doing what you want, you have the wrong tool. This looks fine for a mini detail on some mdf or as a laminate trimmer.
@denkarper 2 ай бұрын
I know, the tools are meant for beginners, and I was routing both directions, my other router does that perfectly, but this tool is of course better at mdf and plywoodninly moving it forward. If I look back at the video is realise I should have shown both parts of the video .. Thanks for you option 👍
@h8GW 2 ай бұрын
Does the smart battery last twice as long because it's newer, or does it have denser cells? It looks like a 2AH battery to me.
@DennisDIY 2 ай бұрын
The size is a little bigger, I think it's because of beter battery management system. They claim these cells are balanced better. I have no idea if those cells or batteries are more recent.
@LinasZenitas 2 ай бұрын
Uff i think it's really bad.. Would rather take good old pruning saw
@DennisDIY 2 ай бұрын
Yes, 12volt is just missing power, you can hear the rpm go down in the video
@1clearlyn 2 ай бұрын
Good product but e18 in Lidl in ireland
@DennisDIY 2 ай бұрын
I have seen many different prices in other countries for Parkside tools.
@Vandal91100 3 ай бұрын
És ezért a àgért évente kell egy aksis ollò.
@DennisDIY 3 ай бұрын
👌
@TDaanT 3 ай бұрын
Werkt de klopfunctie überhaupt wel? Zo klinkt het namelijk niet echt op het filmpje.
@DennisDIY 3 ай бұрын
Hij werkt, maar minimaal, het is een te lichte torque voor beton, voor baksteen werkt het prima
@playboj9839 3 ай бұрын
Problem is: where to get 1/3 pitch replacement chains ? I cant find one. Except some very expensive 20 EUR (the whole machine costs 40 EUR) few ones, which seem to be the lasts on the market
@DennisDIY 3 ай бұрын
Good question, you can just send customer service a message my experience with them is very good an fast., Here they sell them online for 14,99, most of the time it's sold out
@char4cl 2 ай бұрын
Just sharpen it, not replace. I think, for such chain saw it will last long enough.
@DennisDIY 2 ай бұрын
Posible yes, Lidle do sell them
@filippomariaberio317 3 ай бұрын
Just bought it, looking forward to let you know my thoughts. Thanks for the video and the review!
@DennisDIY 3 ай бұрын
Yeah I hop you like it, let me know
@battedtomcatnlnl153 3 ай бұрын
Van €36 naar €8... hoe dan
@DennisDIY 3 ай бұрын
Ja aanbiedingen afwachten loont bij Lidl, soms denk je de aanbieding te hebben gescoord en gaan ze nog een keer omlaag.
@TheWebstaff 3 ай бұрын
Phew. I was worried it wouldn't be water resistant!! Glad we cleared that up!! 😂😂
@DennisDIY 3 ай бұрын
Oh I forgot to mention that of course, sorry!!, If it melts the next weeks I will let you know. 😂
@chuckyluvskalae5102 3 ай бұрын
If you are hired from any construction company that involves you using a carpenter pencil please don’t bring out this sharpener
@DennisDIY 3 ай бұрын
True, 100%😂😂
@chuckyluvskalae5102 3 ай бұрын
@@DennisDIY thank god you get it 😂 just for that I’m subscribing sir
@DennisDIY 3 ай бұрын
Hahah Thanks, it's just showing the option to get a Carpenters pencil sharp another way, there are many people struggling with that 😉