😂

SHUT THE F PRESSURE WASHER OFF WHEN TALKING 🤷🏼‍♂️🤪✌️

Just use a coffee stain removal from your local carpet cleaning store

What do you mean by the low pressure way?

Dear oh dear. this guy is tediously boring...

I just layered it with SnS as base then Beads maker as top/last coat afterwards (so if there were streaks left behind by SnS then its wiped down good already for sure by the beads maker) Have it exposed to the sun for more than eight hours driving. Its shinier and my car’s orange paint is coming out much warmer now. like it’s coated with yellow wax

You should get the cat transmission for it so it cuts the rpm in half to save the pump

The guy talks way to much....annoying

Rinse it off completely, blow dry it, apply once more if it’s an extremely contaminated car, and rinse off again.

How do you know which size psi pump to get?

arent you suposed 2 spray it on the brush? so dont get run marks?

just order the classic now thanks

To long

3d products have gotten too full of themselves lately. They charge way to much for their polishes. HD Speed used to be a bargain. now they want 20 bucks for 8 oz and 60 for a 32 oz.

one of the best small detailing channels. you still detailing?

Steer clear of that plastic chrome pieces, I burned though some a bit just applying a wax with the dual action and a soft pad. And don't try to fix them or polish them, you will only make it worse, haha, don't ask me how I know.

So why didn't you let them put the second pump on machine wake up dude

Man by the sound of it either good help is really hard to find or bad help is easy to find i don't know which is the case. One thing is for sure you got some bad luck with people trying to help ya hahahah. If I was you and I saw my buddy break off some threaded piece in my pressure washer I would have lost my shit. Good luck to you man. Oh and thanks for the recommendation on them CAT pumps, I'm gonna go ahead and take a look at one for my set up and see how it goes. Before watching this I had just thought you had to buy a new pressure washer every time your pump goes out. I had no clue that they made pumps that fit on any unit.

i knew it, this is why I got the mjjc black, saves money and pretty much does the same thing

Good stuff! Can you do breaking down exactly what components y I use and how they’re connected?

I don't think washing regularly first and doing this afterwards makes any sense. The product is wash n' coat. I don't know how much it really cleans though, but it's meant to wash and seal on one stage. So, what I'm thinking is having shampoo in the backet (reset) not just water and having the Hydro2 foam in a pump foamer in hand. And just foaming the panel first and handwashing with the mitt right after. This will consume about 1L solution (50mL of product) and maybe less as well as using the foaming method that the company and other reviews have shown is best.

Does anyone know who made this product? Best on the market at half the price. Curious who made it and under what name now.

Why not dedicated leather cleaner? I use APC too but many people say it’s not good for leather 🤔

5 minutes of flashing is to long 2 minutes max

I own the same model and love it. Good review my friend 👍

Pumps don’t put out pressure. Pumps make flow and restriction in psi is how hard the pump is working to produce the rated flow. A 2.5gpm pump rated 3000psi means it can generate 2.5gpm against up to 3000psi restriction if the engine has enough torque to drive the pump against that restriction at its rated speed. You are running the pump higher than it’s rated pressure because your orifice is too small and this a failure due to operator error.

Cool, but just too slow. Id rather "waste product" if it saves me time. Especially hyper dressing, which is pretty cheap.

Have you had any problems with removing metal cone after some time??? I've got both metal cones one classic and another on regular air tool. Probably have to cut them off. Wd40 not helping...should've added tread strip. Just little heads up took off from time to time. Anyways thanks again for the post

I almost bought the black and saw your review, thanks 😊

wow, what a waste of time. Dum Dum detailing. And what an educational walk with the camera....

Do you still like it after owning it for some time?

operator error

It makes your pressure washer work harder

Sounds like you got a dog pump, but hopefully Northern Tools will make it right for you. Good luck and let us know…. Cheers from Canada

So my sprayer from h. Depot. I thought it would have some type of lock on it to keep pressure. I pump the bottle up and the spray comes out for a while. Also the pump has numbers on the top. How to use those numbers?

Should've bought a country home. Acres between neighbors is my heaven

Good stuff

I use the 3and 1 first then the spray and it came out like glass the one thing was the white powdery stuff other then that it was good

I used it like the way you would normally use wax. I treated the whole car then changed towels and wiped it down. It looks great. My grand marquis has never been so shiny!

How hot does it get

fokit jy jaag kak aan,,ek laat jou nie toe om my kar skoon te maak nie,,,eers overheat jy die deurpaneel in n ander video met jou steamer, nou die leer sitplekke se dye

Really honest and helpful Dan, thank you mate from Australia.

Kool video

Hello dan,hey I was wondering if you could make a set up video on how you connected your heater to the tank and link all the parts needed. Thanks

Hi Dan, We recently watched your video at: kzbin.info/www/bejne/hXOpn4mXebKAo5Y Do you have any knowledge or experience to resolve overheating CAT pressure washer pumps? We own a CAT Pump Model 2SFX30GS. It has developed an overheating problem. It overheats after 3 mins run time. Our Pump Tech replaced Valves, Valve seats, Seals, Bearings, Gaskets and Unloader. Can you offer some advice as to why overheating still occurs? The original overheating event melted the Oil Fill Red Cap. Thank you. Regards.

I didn't get anything out of this other than you used a soft microfiber towel and scrubber.

Yak yak yak

Great informative video man I appreciate it. I hand wash our cars at home with my electric 1800psi pressure washer and am setting up my home wash rig lol gun, 50ft hose, trying to play with 2 different foam cannons and really having a lot of fun!

I know you know exactly what you are talking about - no question!! But you have me so darn confused I am laughing. Good video though lol. Thumbs up 😎

Bro thanks for this vid we needed this for real