great job. About to do my '05. By the way, did you talk the owner into a set of sway bar links too? That passenger side looked trashed. :)
@219jello7 күн бұрын
@darrinhaynes6845 no I didn't but I will mention it. Thanks
@joesavage49058 күн бұрын
You can also just use a 3/8 hose and clamp … I used about 10” of hose. Just have to break tabs off. I also used some flex seal tape around the rubber gasket.(overkill)
@steveleston184813 күн бұрын
good deal did you remove the skid plate to jack up the whole front?
@219jello13 күн бұрын
No I did not
@bryancarey816616 күн бұрын
Very good video BUT WOW got to love new cars making it so hard just to do spark plugs
@ryanbaker760820 күн бұрын
Quick question what brand of cv axle did you use on the ram
@219jello20 күн бұрын
@ryanbaker7608 I belive Cardone off RockAuto
@johnharris185222 күн бұрын
Do you remember how many miles were on the Jeep cherokee when you changed the plugs?
@219jello22 күн бұрын
@@johnharris1852 I think around 80k
@rangerbob114727 күн бұрын
Should be a recall
@MrJoeyhall87Ай бұрын
Did you use the same screws to screw in the j channel?
@219jelloАй бұрын
@@MrJoeyhall87 I used roofing nails for the j channel
@OreoSimpson-t4iАй бұрын
Your video is not flashy but that actually made it very useful for me thank you.
@219jelloАй бұрын
@OreoSimpson-t4i yeah I'm not all about the whole proper KZbinr video delivery crap. I'm about delivering information as best as possible based off experience. Hope this video helped you and thanks for the input and for watching
@pescad0Ай бұрын
Would a '19 ranger be the same thing?
@219jelloАй бұрын
@@pescad0 I am not sure
@thomasliu4534Ай бұрын
Thank you so much , what is the part ?I can search this part on ford official website
@jeremynewton6669 күн бұрын
Amazon has it
@Jay-GoАй бұрын
Looks like this was 3 years ago. How's it holding up? Did it work out okay without the cleanouts at the downspouts? Thanks.
@219jelloАй бұрын
@Jay-Go only issue I have is the gutters themselves. I have to clean them twice a year. Going to install some gutter guards eventually. Other than that, they work great.
@Jay-GoАй бұрын
@@219jello Great to hear. I also deal with needing to clean out my gutters when the trees dump their leaves. I've been looking at the various gutter guard/leaf guard options. I'm about to DIY my own downspout drains. Trying to decide if I can dig my trenches by hand or if I need to rent a trencher or something. Thanks.
@eddiegarcia7959Ай бұрын
BEAUTIFUL!!!
@JD-im4wuАй бұрын
my spark plug broke @ 18ft/lbs reinstalling a used but in ok condition one. I think the specs for the upper manifold are only 89in/lbs according to jeep service manual. overtime they get stuck in there so not reliable to use the torque amount to take them off. its a pita to get them off if they brake inside the cylinder.
@williammastenbrook9101Ай бұрын
Thanks so much for making this. Not much out there for 2019 F150.
@219jelloАй бұрын
@@williammastenbrook9101 thank you for watching!
@kevinbroadway5398Ай бұрын
usually those iridium plugs come pre gapped and they say do not gap cuz i suppose you can damage them moreso the iridium part
@219jelloАй бұрын
@kevinbroadway5398 yeah but I always check them regardless. You never know if something wasn't right from the manufacturing plant. Shit happens
@Kg-xx9okАй бұрын
Awsome bro thanks !!
@219jelloАй бұрын
@Kg-xx9ok thanks doe watching!
@thack1992Ай бұрын
Looks great. We are just building a new garage/shop and am leaning towards metal cladding. Only concern I have is hanging cabinets or storage shelves. Did you use spacers or what have you used ?
@219jelloАй бұрын
You would need about 3/4" thick spacers between the ribs. You could screw those into the 2x4s behind the metal. Then screw your cabinets through the spacers an into the 2x4s
@thack1992Ай бұрын
@@219jello yes i realize that I need a spacer, but I wondered what you used
@williamwalsh7851Ай бұрын
THANK YOU, I just finished and your video was SPOT ON, again THANK YOU
@219jelloАй бұрын
Thanks for watching! Glad you had success
@andrewconlow56272 ай бұрын
Very Detailed the only person i found thus far that demonstrated correctly how to remove the wire. Great job. Thank you!
@219jello2 ай бұрын
Thanks for watching!
@jpbowling79102 ай бұрын
Hope to hear about your tune. Following
@jpbowling79102 ай бұрын
Liked and subscribe already... soon in. I have same specs of the problem on mine.... following. Will let ya know bud
@donnaharder65842 ай бұрын
Thank you this is helped tremendously. I just recently came across this problem in my truck and it’s also a 2019.
@219jello2 ай бұрын
Good luck! Mine is still dry
@jesusfreakster1012 ай бұрын
Thank you sir- can’t be easy doing all that while making video. Contemplating same material for new shop. Concerned that it will be a pain to bolt wood shelving to though…
@219jello2 ай бұрын
You could bolt shelves to it, but would require spacers to clear the ribs of the steel panels
@hjr9272 ай бұрын
Looks great we are in process of starting ours but on the floor is the wall liner going into a J channel. We ordered our wall liner and all materials along with insulation from the place that built the polebarn. Saving thousands doing it ourselves. I am concerned they did not give us enough J Channel for the bottom.
@Killer_uv12 ай бұрын
thats a big shameeee
@paulgiusto48312 ай бұрын
You will notice better mileage after the swap 😊
@219jello2 ай бұрын
Yeah for sure. Think I'm getting ready to swap out again soon. At 140k miles and can hear them a little
@junior1300072 ай бұрын
Do you not have to use a vacuum pump? I seen some videos where they do and some they don’t? And great video by the way
@219jello2 ай бұрын
Thanks! Yes, my hubs have vacuum actuators. I just think they seemed like they were weird because my truck wasn't running.
@seasonwoodsmcclelland72313 ай бұрын
Just read the comments after watching the video. I typically feel pretty comfortable with most of the repairs I've done on my own, but this kind of scares me. 😔
@219jello3 ай бұрын
I was a little unsure too, but ended up being rather easy
@philgronek79613 ай бұрын
Looks great Jello!
@219jello3 ай бұрын
Thanks Phil!
@philgronek79613 ай бұрын
Agree NO PHILLIPS!
@williammetzo54073 ай бұрын
Code is 3 ft. from electric meter and 2ft. Under ground. Also, DONT bury until pressure tested. May be a pin hole in pipe itself?? And if it wasn't buried, you could pull the pipe above ground to put the fittings and corrosion tape together. The gas line should be run totally, thru the wall and shut off valve installed so all that needs to be done, is connect the fixture. Also, the pipe needs to be sleeved thru the wall. Just a thought!!??
@219jello3 ай бұрын
I don't have an electrical meter at the shop side so that 3ft isn't an issue. I already asked about that before doing this job. Also, NIPSCO (my electric company) burried their gas and electric lines together in same trench, just separated by elevation a little, same way I did mine. I do have a shut off valve at the house meter and inside the shop so 2 of them. Yeah, hopefully no leaks once I do a leak down test. I'm probably not using this gas line but added while i was putting the electric in just in case I change my mind. I'm not a professional but I did ask the county inspector questions before I did this. I just asked my electric company about the 3ft deal and he said the same thing, yes, if there are meters, then you gotta be 3ft, but if it's done like I did it, then it doesn't matter.
@thawk66653 ай бұрын
Getting ready to do this repair myself. Thanks for the video!
@219jello3 ай бұрын
Thanks for watching. My floor is still dry!
@cracklespinner48023 ай бұрын
Are you fckin kidding me...all this to change spark plugs!
@rendiewmit863 ай бұрын
I have a 2018 I've had for over 2 years. Put brand new Cooper Discoverer tires on over a year ago. Now I'm hearing "road noise" sounds like a mud tire. I'm assuming it's the hubs. Is that the sound they make when going bad? The tires seem to wear uneven so I had them rotated and it still makes the noise. Also, if only 1 hub is bad should i still replace both or just replace the bad one?
@219jello3 ай бұрын
Yep mine sounded like tires too
@rendiewmit863 ай бұрын
@@219jello I edited my original post to include the following. If one is bad should I just replace the one or go ahead and replace both?
@davejalenderki3 ай бұрын
Awesome video. Thanks for sharing. I have a ‘76 Stingray that I am about to drop in a 383. I have the complete Holley Sniper infection and ignition system. Your video is very informative.
@219jello3 ай бұрын
Thanks! Good luck with your project
@davejalenderki3 ай бұрын
@@219jello Thank you sir.
@deerhunter30143 ай бұрын
Can you give us an update on how this affected your hunts?
@219jello3 ай бұрын
That's a good idea. I'll make a future video showing pictures and videos I've captured over the year. It does exactly what I was hoping. Deer always moved through this area but they actually hold up for a bit now, even if they don't drink any water. Seems like they like it more when there's not much foliage or during the rut. Every animal in our area use it. Fox, cats, raccoons, coyote, owls, black, grey and fox squirrels and even crows. A nice video compilation would be cool
@NCsurfer6072 ай бұрын
How often do you have to add water?
@NCsurfer6072 ай бұрын
How often do you have to add water ?
@deerhunter30142 ай бұрын
@@219jello I've just installed a 40 gallon water hole (TSC stock tank) on an occasional deer thoroughfare. Got a squirrel & groundhog on cam hitting it, so far. And let me tell you, that machine of yours WAS needed. I hand dug my 40G hole, took several hours, between rocks & roots. It's amazing to me how people with nice equipment eventually take it for granted! 🙂
@archerontarioАй бұрын
Throw in some copper pipes in the bottom of it it prevents algae in there Also throw in pepper grass it detours biting midges the spreads EHD
@mauriciocabeza22863 ай бұрын
Cool video. Nice setup too.
@219jello3 ай бұрын
Thanks man!
@mauriciocabeza22863 ай бұрын
Enjoyed this video. I like the way you presented it and how you got through it.
@219jello3 ай бұрын
Thank you!
@tonypitsacota25133 ай бұрын
"Ford knew nothing about the problem". I work at Ford Truck plant. Bought new F-series every generation since 1989. ALL of them had rear window leaks. My new one this year: rear window leak. Ford Dealership solution? "Park in Garage. Don't drive in the rain." Wow. Can't wait for the new Silverado.
@219jello3 ай бұрын
I switched from Chevy to Ford this time. Chevy screwed me on a shitty transmission in my at the time brand new 2017 Z71 LTZ. Had a shuttering condition going on which was a known issue with the torque converter. Their fix was change the fluid. Well that got me to the expiration of the warranty before it got real bad. Then they said sorry, we can't do anything. This 2019 had a couple small issues I fixed but other than that, this truck has been the best one I've owned. At 140k miles and still running/driving strong.
@TangentJim3 ай бұрын
219Jello - Nice going . Easy to follow . --- Jim
@steveduf98253 ай бұрын
How many gallons sap per hour you can evaporate?
@219jello3 ай бұрын
I was getting around 4-5 that season. I added some small fan this year and got 5-6 this year
@hunterman600cc3 ай бұрын
In the 4 months I've owned my '19 f150 super crew, I've had to get the panoramic totally gone through to eliminate the grab handle pee'ing on my while driving. I still have a wet driver side floor weeks after their "fix". They're charging me for another visit. They assured me they checked my transmission which has several times failed to go into reverse resulting in the truck rolling forward (backing up the driveway) and almost hitting my wife's car. I'm over $500 into FIXED and still have a wet floor. At least the transmission hasn't acted up since the last visit.
@edthegr88824 ай бұрын
Thank you
@ajff82294 ай бұрын
How many miles on this 2019 ram when you had to replace this cv?
@219jello4 ай бұрын
I believe in the 80k range
@6spd85notch4 ай бұрын
You deserve 10 thumbs up for having the patience to figure that out. Good work hopefully mine doesn’t drive me crazy too. I ordered the xflow 800 and I’m running it on a sbf with a centrifugal supercharger. Holley has a big sale going right now so I got a really good deal on it. Hopefully.
@219jello4 ай бұрын
Thanks! Holley support was very helpful. I did end up doing a follow-up video that shows this unit working much better. To this day, he said it's working great.
@MakeAmericaGreatAgain244 ай бұрын
If you run into the problem of not having the right spark plug puller you can always use the coil pack to pull the plug
@ashleycebryk67624 ай бұрын
Another tip, take a vacuum and and give it at suck at that drain to clear any debris
@knottreel4 ай бұрын
Thanks for the video. I have the same problem, but I know it's rain water. Do you know it the same spout is used to drain rainwater?
@219jello4 ай бұрын
No it is not
@rr-vk5lb4 ай бұрын
Thank you! This is what I needed I was just getting ready to change mine and this is much better than guessing.