Did you drop power with it going in that hot ass engine bay?

best induction for losing power from heat soak lol

Say Hello to higher Intake Air Temps - Supercharger already generates tons of heat.

Did I have ur resonators on ?

DDM has a truly sealed box that pulls from the base of windshield. Also added scoops to the opening in front of windshield. Look good and functional. No hot engine bay air ingested.

Where you got your headlights? Looking real bright

never use this mod. Engine is sucking too much hot air and you lose so much power. Please take a look JCW airbox or AirTec. You will see that is sucking air from the front and the back. But it's cold air which is very important.

A heat shield would make a massive difference. The r53 cuts ignition at 50 odd degrees IAT, I run a GTT one with a shield and even then I see rising temps

Nice video of home. Watching in Australia

Nice video!! Specs from fn2??

I have the oem and I think it’s not worth bothering about after market intakes .It sounds and acts the same way . And doesn’t change the performance . To sound a little more throaty it’s no worth it

not comfy at all thats all about car should be comfy

Nice you bought it before prices went out the roof and the world went crazy.

Does the exhaust drone in the cabin? I’m currently running an Invidia Q300 with a race header on my k24 RSX and the drone at highway speed is deafening. If you’re equipped with a RH along with the Fuji exhaust and it doesn’t drone in the car, I’m just going to have to buy one.

Is there any drone in the cabin? I have terrible drone currently with an Invidia q300 and Race Header. Are you running a RH with the Fuji catback?

I’ve just bought a 2003 Cooper S. Such fun for peanuts! Plan to spend a bit (more than it’ll be ever be worth!) to make it solid, it’s not a daily for me, and plan to keep it for years and years with an eye on it being a future classic.

Wat part of Northern Ireland pal?

Hi Ryan. Love your rocky landscape droning! I found some rock dunes to drone last weekend, hope you’ll take a look: kzbin.info/www/bejne/iZrOpq2NnbSLqbc. Ive got pals with an apartment in Port Rush…. I must go visit 🤣 I’ve left you a 👍🏻 and subscribed. Jackie

Same 😎

I have a 2005 cooper s in the same colour. I love it. Most of my family have minis also. My sister has a 2019 cooper s, my niece has a 2008 cooper s and my niece's partner/my mate has a 2002 cooper s . They are great fun and I've been gradually modding mine and have things like a reduced pulley and larger intercooler etc and now pulling over 200bhp now from the stock 173bhp. I agree they are fab little go karts and still going strong despite their age.

Nice one did u go for the honda drop links? or did you source other brands?

Hey I have a cooper s r52 and ramair but there is no whine sound coming out. Why?

Hey I have a cooper s r52 and ramair but there is no whine sound coming out. Why?

Beautiful bro!!!....mine is red colour with all standart parts all still standart original part like stock DC5R come out from factory..rear bumper,front bumper & inside part all like factory parts originaly..👍🏼👍🏼😁😁

Love the sound mate! So what is the exhaust actually made up of? Is it a straight pipe followed by a single muffler? Any information would be much appreciated 👍🏼

Dude you have yo replace the harmonic balancer....(i think it's called in english like that) because you have a high pitch sound when you took the foot of the gas

hows the ronseal managing in the arches?

How did this hold out?

What exhaust you got there mate?

What manifold and exhaust is on this

Hi mate, can I ask how much it was to straight pipe please?

I had a Cooper S years ago, very similar to this but the facelift (different headlights and fog above exhaust) and it had a Kavs Reduction pully. I didn’t even know that when I bought it till I found some paperwork in the book pack. It went like stink!!!

Hi Ryan. Was thinking off getting one. Have a subaru impreza hatch. Any comments be helpful.

where's the rota wheels

good job 👍

Amazing accent.

how's it holding up for you matey

Nice Clean Sound. What brand muffler/resonator was used?? And also include the details of how you achieved your sound. Thank you 🙏

Looks good just wondering where you got the brembo stickers thanks

All that work just to replace an air filter? it already has ram air

Sounds like a civic XD

The RamAir kit should come with another hose pipe in black that looks like a long plastic spring that connects to the RamAir box and goes to the air duct? really do need that bro?....

The compressor sound is Sick.

Clean car dude look after her! There getting rare these days and they don't make them like this anymore!

Want the whine and keep the cold air intake ? Remove the original airbox, cut a 60 mm hole at the back of the airbox as well as in the plastic panel behind it and link them both with a water pipe rubber link . Cost 1 quid and keep the stock look

Good quality. Ordering one for my k swap. 96 ex coupe. K24 + turbo

Cable ties?? I’d say do the job once and do it properly with jubilee clips, also this is a hot air intake, the amount of heat soak you will be getting from the manifold will be a lot, much better of with a Oranjje stealth airbox or an airbox mod that allows you to put a k and N or similar cone filter within the airbox to avoid the heat soak!

that golf is nice

I had one exactly like it!!! Loved that car !! ...always a blast to drive !! congrats! I'm shopping for another now!!

Make an update video