Moto XJ

Пікірлер

@Vidyo-Mayn 2 ай бұрын

Remember folks, it can't be found if it's deep enough in the woods

@RHLAMBOFGOD 7 ай бұрын

I know this was 4 years ago did u find those grommets and what gauge wire did u use and did this hold up

@stevenscheibler4888 Жыл бұрын

Great video. I’ll be tackling this this weekend.

@fishnfreak04 Жыл бұрын

What size wire did you use to patch it?

@onefastcyclist Жыл бұрын

A good fix! Chrysler's accordion grommet's don't age well - you might try: clean the torn surface with alcohol, apply mixed quick-set epoxy, hold together while you tape it together or hold it till it sets up to solve the leak without replacing the grommets

@josephvarner603 2 жыл бұрын

He said "FUCK THIS" lmao

@shaunmoeller3288 2 жыл бұрын

I'm having the same issue with my 96 including the lock not locking even with the key... Did you just connect the wires that all match

@rogerrobinson5540 3 жыл бұрын

2 cents worth: replace ALL the wires with ~16” of new wire, so you can stagger the splices to avoid a big gob, and have all new wire through the grommet area. Unless of course this is so much fun you want to do it all again down the road....

@chellobarnes7257 4 жыл бұрын

What did you do for leak? Mine's leak in the rear at the car wash

@gersonruiz1714 2 жыл бұрын

Same

@JaceD4V1S88 4 жыл бұрын

it's common, i have a 94 previa and the rear lock wasnt working and the lights were intermittent, i pulled the loom and sure enough theres like 6 broken wires, on 2 the sheathing is cracked open

@mikemc4340 4 жыл бұрын

My brake lights keep going out on my 2000 xj. My wires are totally exposed from the previous owner.

@deathmetal137 4 жыл бұрын

That'll probably be the same problem for my 2000 xj as well I'm gonna look into this

@Zoofactory 4 жыл бұрын

Strange, I have a 2000 and the wiring appears to come from the other side of the vehicle. I’m not referring to tow wiring. Will have to double check. Good news is my interior is already out so I’ve got decent access. Thx Good video 👍

@jayman1601 5 жыл бұрын

Had the same problem with my 2000 XJ. Fixed it with solder and heat shrink. Still holding up fine years later.

@lucasshakhov2239 3 жыл бұрын

Just found out this about my XJ today.. wish me luck 😂

@miguelsousa8945 5 жыл бұрын

Did yo replace the rubber grommet? Do you know the part number? Thanks :)

@motoxx77 5 жыл бұрын

I haven't replace the grommet.

@carolynlacy343 5 жыл бұрын

I have an 88 with some broken wires, this was incredibly helpful, thanks so much for sharing!

@patriot72 5 жыл бұрын

Did you find out why your read defrost light is not working?

@motoxx77 5 жыл бұрын

Not yet but I haven't had the time to hunt the problem down. My guess is that I should have checked the other wires that weren't broken in that bad spot. They're probably broken on the inside.

@swingstyle99 5 жыл бұрын

Have exact same issue on my 01

@patriot72 5 жыл бұрын

Nice job

@78amilcar78 15 жыл бұрын

esta chido

@motoxx77 15 жыл бұрын

It was shooting at 380fps.. lol

@rocknrolla12992 15 жыл бұрын

blindfire @ 1:09

@motoxx77 15 жыл бұрын

Well I'm happy with the ccm, i added a spring to the kit and it dose its job.

@IanFitty 15 жыл бұрын

just made my lightning today =] Shoots amazing, granted it's not nearly as good as yours, lol. I'm ordering an Arch pump kit most likely, if not...then a silver/clear ccm deluxe. can't decide. nice pump man!!! props to you.