Had the same problem with my 2000 XJ. Fixed it with solder and heat shrink. Still holding up fine years later.
@lucasshakhov22393 жыл бұрын
Just found out this about my XJ today.. wish me luck 😂
@carolynlacy3435 жыл бұрын
I have an 88 with some broken wires, this was incredibly helpful, thanks so much for sharing!
@stevenscheibler4888 Жыл бұрын
Great video. I’ll be tackling this this weekend.
@Zoofactory4 жыл бұрын
Strange, I have a 2000 and the wiring appears to come from the other side of the vehicle. I’m not referring to tow wiring. Will have to double check. Good news is my interior is already out so I’ve got decent access. Thx Good video 👍
@rogerrobinson55403 жыл бұрын
2 cents worth: replace ALL the wires with ~16” of new wire, so you can stagger the splices to avoid a big gob, and have all new wire through the grommet area. Unless of course this is so much fun you want to do it all again down the road....
@onefastcyclist Жыл бұрын
A good fix! Chrysler's accordion grommet's don't age well - you might try: clean the torn surface with alcohol, apply mixed quick-set epoxy, hold together while you tape it together or hold it till it sets up to solve the leak without replacing the grommets
@deathmetal1374 жыл бұрын
That'll probably be the same problem for my 2000 xj as well I'm gonna look into this
@JaceD4V1S884 жыл бұрын
it's common, i have a 94 previa and the rear lock wasnt working and the lights were intermittent, i pulled the loom and sure enough theres like 6 broken wires, on 2 the sheathing is cracked open
@RHLAMBOFGOD7 ай бұрын
I know this was 4 years ago did u find those grommets and what gauge wire did u use and did this hold up
@shaunmoeller32882 жыл бұрын
I'm having the same issue with my 96 including the lock not locking even with the key... Did you just connect the wires that all match
@fishnfreak04 Жыл бұрын
What size wire did you use to patch it?
@mikemc43404 жыл бұрын
My brake lights keep going out on my 2000 xj. My wires are totally exposed from the previous owner.
@patriot725 жыл бұрын
Nice job
@chellobarnes72574 жыл бұрын
What did you do for leak? Mine's leak in the rear at the car wash
@gersonruiz17142 жыл бұрын
Same
@miguelsousa89455 жыл бұрын
Did yo replace the rubber grommet? Do you know the part number? Thanks :)
@motoxx775 жыл бұрын
I haven't replace the grommet.
@patriot725 жыл бұрын
Did you find out why your read defrost light is not working?
@motoxx775 жыл бұрын
Not yet but I haven't had the time to hunt the problem down. My guess is that I should have checked the other wires that weren't broken in that bad spot. They're probably broken on the inside.