Copper doesn’t like to go through a leaded barrel. If you clean the barrel extremely well it should group much better. Ron spomer did a video demonstration of this.
@christamez734Күн бұрын
Just bought slide and frame separately over labor day for $359 total but frame came with 2 mags. They also ran a deal - 10mags for $250. Keeping 6 and selling 6 so that brings my mag cost to $20 each. Threw a TruGlo on it and gonna shoot it tomorrow. Grip texture and trigger is fine but I shoot Glocks not Stacatoss. 😂
@michaellewis5624Күн бұрын
I hear people say i built the upper, did you buy the upper complete or buy the bcg, barrel and gas tube and assemble it? That's what build is to me. Attaching a upper to a lower is not a build to me.
@tylerepperson43812 күн бұрын
What vortex are you using
@cherrycitygunsandammo10112 күн бұрын
Vortex Strikefire 1-6
@hunternichols55972 күн бұрын
First pistol first shots 10mm ain't bad
@preacherbiggin3 күн бұрын
What can is that? Seems a bit loud?
@cherrycitygunsandammo10113 күн бұрын
@@preacherbiggin I need a smaller end cap. It’s a SilencerCo hybrid 46M. I only have a 30 and 45 cal end cap so I was running the 45 obviously. However, camera mics tend to quite loud things and amplify quite things because it’s trying to keep the volume in a narrow window, so it can be misleading. But it could also be quieter with a 9mm end cap.
@Chesterfieldfox3 күн бұрын
hey bud, nice rifle. what height or scope rings do you have on there? small or med
@cherrycitygunsandammo10113 күн бұрын
@@Chesterfieldfox small Warne vertical split. Thank you for the compliment.
@harrra14 күн бұрын
Can you post your build parts list? Thanks in advance.
@cherrycitygunsandammo10114 күн бұрын
@@harrra1 it’s PSA gen 3 PA-10 lower. The upper is a 12.5” Faxon barrel a 10.5” faxon handguard. An Aero upper and an aero breach charging handle.
@harrra14 күн бұрын
@@cherrycitygunsandammo1011 in researching, I have my eye on the PSA gen 3 lower and complete upper minus the barrel and hand guard; raptor charging handle, and faxon 12” barrel. It appears I’m in the right track. Any suggestions?
@cherrycitygunsandammo10114 күн бұрын
@@harrra1 I don’t think you’d go wrong with those choices.
@johnoakley55444 күн бұрын
bca has been having an issue with bcg breakage. Specifically with the pins for the 7.62x39 bcg (6.5G parent case).
@theh.b.10354 күн бұрын
I upgraded my g3c with a stainless guide rod and spring and now it has zero muzzle flip . Huge difference!
@cherrycitygunsandammo10114 күн бұрын
@@theh.b.1035 good to know. Thank you
@michaelcervantez35705 күн бұрын
Unfortunately the 22 arc ammo is more expensive than 6 arc. I don't understand why? I will stick with my 6 arc until 22 arc gets less expensive.
@rickmallery14075 күн бұрын
That's cool!
@cherrycitygunsandammo10115 күн бұрын
@@rickmallery1407 I thought it was pretty neat
@bmt03057 күн бұрын
Which scope?
@timthurman32018 күн бұрын
Love it woo woo
@blindboyjonny8 күн бұрын
Since you didn’t edit this, you shot five shots inside of one minute. You should’ve put one shot at least every minute maybe two minutes to get true accuracy. You can probably fry eggs on that barrel since you’re shooting a magnum. Slow down, young man. You’re not giving us anything but a view of you burning up your barrel
@cherrycitygunsandammo10118 күн бұрын
lol if you say so. Don’t think I do it right. Go find a channel that appeals to you. I do a tremendous amount benches shooting.
@roccofiori19618 күн бұрын
Commenting for the algorithm subscribed for more shorty Grendel content. Currently building a 13.9 sons of liberty 6.5G. Interested in seeing how the hornady 100 grain ELD-VT performs
@stephenrossi56609 күн бұрын
You know the 220 swift is faster
@cherrycitygunsandammo10119 күн бұрын
@@stephenrossi5660 you are correct. I mis spoke. If you read comments this was discussed and resolved almost 3 years ago.
@davidhamilton76289 күн бұрын
Even if they aren't accurate training ammo good for flinch work for new shooter.and just a fun novelty
@cherrycitygunsandammo10119 күн бұрын
@@davidhamilton7628 without a doubt. And it’s fun!
@4thstreetgarageandfab10 күн бұрын
Watching this reminds me that I need to get more wheel guns
@cherrycitygunsandammo101110 күн бұрын
@@4thstreetgarageandfab damn right you do!
@rickymaynard488011 күн бұрын
Yea, your grip and consistency make all the difference in those groups!
@AnubisReviews13 күн бұрын
They need to make 5, 10 and 20 round mags for this rifle.
@cherrycitygunsandammo101113 күн бұрын
@@AnubisReviews there’s a better solution. After I did this video someone commented that I could contact Ruger and get a new bottom piece that allows the use of AR-15 mags. I did and it cost me less than $30 with shipping from Ruger.
@AnubisReviews13 күн бұрын
@cherrycitygunsandammo1011 where is the piece itself? That info isn't even on any of the forums or Ruger's website.
@cherrycitygunsandammo101113 күн бұрын
@@AnubisReviews I had to call them and talk to the parts department. They definitely should have it on their website. But I think they wanted the serial number if I remember correctly to make sure it would be compatible.
@randyreynolds104514 күн бұрын
The .357 is awsome too in the same configuration.
@randyreynolds104514 күн бұрын
My favorite gun❤.
@PapaSmurf-wb5ux15 күн бұрын
I took my mags apart and lightly polished/sanded the follower and lightly oiled them and I have not had any issues since doing that.
@krishall318715 күн бұрын
Im using the holosun 507 comp on mine and no plate and can co witness with the irons ..no issues with 350 rounds on it now.
@bzizzlezman355316 күн бұрын
I have the same exact set up with the Sparrow and the S&W 5.7. I will be testing it out today. Have you heard about baffle strikes yet? I am a little concerned about this.
@blackopssavage12 күн бұрын
The company says it's rated for 5.7 so unless you have unconcentric threads, I wouldn't worry.
@cherrycitygunsandammo101112 күн бұрын
I disassembled it after shooting and it was in perfect shape.
@bzizzlezman355312 күн бұрын
Thanks for getting back to me. I had zero issues with my set up over the weekend. I pretty much eye balled it with a flashlight when mounted and it looked continuously straight through the bore. The Sparrow is a very nice can!
@cherrycitygunsandammo101112 күн бұрын
@bzizzlezman3553 I love my sparrow
@Cucurú-c9v16 күн бұрын
Love the way you can just let the rounds fall with all the weight of the primer falling on the bullet below it. Hopefully a round doesn't discharge on you. Plus if you were in a bad situation you may not be able to put that little rod in the little hole so you can shoot. I know, teach them what not to do. That's how you do it. Ask Henry the correct way to load. Or try Hickok45 here on KZbin.
@cherrycitygunsandammo101116 күн бұрын
@@Cucurú-c9v what a dumba$$ comment. You clearly know nothing about lever guns. Them dropping is nowhere near the impact that they experience under recoil and they are all stacked bullet to primer. That’s why you only use round or flat nose bullets in a lever gun. Go show off your lack of knowledge elsewhere and kick some rocks while you’re at it.
@Rickkari717 күн бұрын
I use factory hornady black eld match for deer hunting in my 20” BCA Grendel upper. Sub moa. 3 for 3 with deer, one at 70 yards and 2 at 175 plus yards. 1 for 1 with a 30 yard coyote that showed up on a morning deer hunt, poor girl. Basically just been shooting straight out of the box. Hopefully it continues to hold up. I only paid $212 with free shipping a few years ago for the upper. Prices have changed for sure. Love the round.
@cherrycitygunsandammo101117 күн бұрын
@@Rickkari7 it’s a great round. I also have a 20” BCA upper and it shoots great. I just wanted an ultra lite handy rifle for way back behind the gates.
@shaoyizhang259620 күн бұрын
Unfortunately your holosun is also Chinese made junk😂 also you forgot to install the spacer, your 3x is clearly lower than your aems.
@cherrycitygunsandammo101120 күн бұрын
@@shaoyizhang2596 not mine. Borrowed for review. 😂
@55Magnetic21 күн бұрын
Have a 12.5” I’m working up shortly. Curious if you found a favorite powder/bullet combo that has worked well for you so far in your 12.5. (I Don’t recommend posting the exact load recipe - just the bullet and powder) thx keep up the great content
@cherrycitygunsandammo101121 күн бұрын
@@55Magnetic so far I’ve been experimenting with 100gr Barnes ttsx and benchmark. I’m going to be trying some different combos with that bullet and some other powders. I just got some ballistic gel so make sure you are subscribed. I’ll be doing videos with the different powders and how that bullet performs in gel.
@55Magnetic21 күн бұрын
Funny i was looking at load data for benchmark + TTSX when you replied :) sub’d and looking forward to seeing what you find. I’ll share my results as well 🤙🏻
@cherrycitygunsandammo101121 күн бұрын
Thank you! I’m looking forward to comparing notes.
@john.hoff3521 күн бұрын
What's a good home defense model, short barrel with better recoil?
@cherrycitygunsandammo101121 күн бұрын
@@john.hoff35 one of the best budget options is the Maverick 88. Can be found for $200 new
@TheBartowBoy22 күн бұрын
I just purchased the TTI took it to the range 50 shots downrange 5 misfires, unacceptable ! Contact company, return email says the spring installed at purchase needs to be replaced.
@cherrycitygunsandammo101122 күн бұрын
@@TheBartowBoy that sucks. Hopefully they’ll make it right
@ronaldmaranto36822 күн бұрын
I bought one of these maybe the biggest piece of junk rifle Ruger ever made.Very cheaply made.
@cherrycitygunsandammo101122 күн бұрын
@@ronaldmaranto368 that’s weird. The Ruger American are well loved and in my experience, have performed admirably and accurately pretty much across the board.
@4thstreetgarageandfab23 күн бұрын
Wait a minute... you have to manually load the cartridges into the chamber before it will fire? Its not automatic or Bluetooth loading? That sounds like a pretty poor design and you should just cut your losses and sell this to me for scrap metal prices. No need to thank me for doing you this favor. Not all hero's wear capes.
@cherrycitygunsandammo101123 күн бұрын
@@4thstreetgarageandfab I’m learning to deal with the incredibly old, manual load design. If I can’t figure it out, it’s all yours.
@anthony838525 күн бұрын
That gun is real 🍒
@cherrycitygunsandammo101125 күн бұрын
Thank you, I just wish it were mine!
@Poindogindustries25 күн бұрын
I bought one of these with your coupon code for my Micro Dagger C-1 as well. I carry with an eberlestock bando bag with a tight chutes MARS magnetic insert and the magnets fold it right into place, no issues with the draw at all. I’ve only shot with it once but I love the feel of having some extra leverage over the gun. I think a lot of guns in the coming years are going to have these installed… way more effective than any forward grip I’ve installed on an AR.
@JK9733825 күн бұрын
Love the video. My favorite rifle with my next suppressor and my favorite gun shop getting a shoutout.
@cherrycitygunsandammo101125 күн бұрын
@@JK97338 thank you for watching. You can’t go wrong with the rifle or suppressor.
@PepeDeezNutz25 күн бұрын
$50 for a optic plate is a F ing joke
@TimJSHeise26 күн бұрын
Just found your channel. I’m a fan
@cherrycitygunsandammo101126 күн бұрын
Thank a lot, I really appreciate it!
@Again-AGN26 күн бұрын
Do you keep the rubber o ring on that came with the FN 502?
@cherrycitygunsandammo101126 күн бұрын
No. When I take the thread protector off I take the O ring off as well. The suppressor is designed to seal on its own.
@PineyJustice26 күн бұрын
Swap out the bolt and the firing pin. The BCA carriers are okish, but the firing pins and bolts are pretty junk.
@cherrycitygunsandammo101126 күн бұрын
@@PineyJustice thanks for the tip. It’s already a different bolt because the bcg came with a 5.56 bolt. I always keep spare firing pins and a few other parts. Luckily I had a spare cam pin.
@bill-nj6fc27 күн бұрын
if the ground is your target your an ACE SHOT !
@cherrycitygunsandammo101127 күн бұрын
Give me a link to one of your videos so I can see how it’s done.
@BrimforBreakfast27 күн бұрын
Yessir, great choice with the Hybrid 46m I have the same setup except for the muzzle brake. What's the name on the muzzle?
@cherrycitygunsandammo101127 күн бұрын
It’s a SilencerCo asr muzzle brake.
@firebug021428 күн бұрын
Looks like the recoil is much less with the subsonic, than regular factory rounds.
@cherrycitygunsandammo101128 күн бұрын
Without a doubt much less. Just surprising how much there still was with them being subsonic.
@HumbertoedilsonRíosmartinez29 күн бұрын
Amigo buena noche una pregunta yo tengo un revolver de esos pero me le faltan 3 piezitas sería fácil conseguirlas para poderlo volver a utilizar pues lo envíe a una reparación y le votaron esas partes
@cherrycitygunsandammo101129 күн бұрын
Es posible, pero deberá ponerse en contacto con North American Arms y hablar con su servicio de atención al cliente. gracias por preguntar.
@philipschofield7105Ай бұрын
Mother f*ker! That clay block looks like a T1000. That's 1993 40mm grenade destruction.
@citoloft1969Ай бұрын
Thank you for putting us up on that. Good to know. I’m planning to pick one up. Thank you.
@cherrycitygunsandammo1011Ай бұрын
You won’t regret it. Have fun.
@citoloft1969Ай бұрын
Those there were no joke they kicked your butt back. Holy cow.😂
@cherrycitygunsandammo1011Ай бұрын
@@citoloft1969 they really did. I should have started leaning more into it.
@rustybrockway5523Ай бұрын
22-250 hornady superfornance is 4450 FPS with the 35 grain bullet
@limak9434Ай бұрын
Bottom of the front sight needs to line up with the top rear of the frame. Think of it like aiming a shotgun bead.