4 жыл бұрын
5 жыл бұрын
Пікірлер
@jjparcero3440 5 күн бұрын
Nice
@rogerhartje5964 Ай бұрын
well, huh! As much time as I spend with self-tapping screws, I never ever thought of starting them with a tap. That by it's self was worth the price of admission. Nice job on the playground too.
@robertgrubbs8983 6 ай бұрын
How much did that cost
@willhaha9978 7 ай бұрын
This order …
@rainacherienne1010 7 ай бұрын
Terrrible
@Aquacoil 8 ай бұрын
Nice video!! this was a joy to watch in class
@expedition-fun 8 ай бұрын
This is so awesome
@JaredAlexanderStevenson 8 ай бұрын
Hey, does anyone here know if your platform height is off by a few inches from 5ft, then can it still work with a slide designed for a 5ft platform?
@papacreaky 8 ай бұрын
My platform was not exactly the right height for the slide. It was a little shorter by a couple of inches. The plastic was flexible enough to still work. I also slightly dug the ground out at the bottom of the slide to help level it. Hope that helps!
@JaredAlexanderStevenson 8 ай бұрын
@@papacreaky yes that helps! Thanks!
@raulciprianoyahoo 8 ай бұрын
What did it end up costing you?
@papacreaky 8 ай бұрын
Hard to remember now. I think all said and done it was somewhere between $1,100 and $1,400. That’s 2020 prices which were a bit higher because of the shortages, but could be similar now due to inflation. 🤷🏼♂️ Sorry I can’t be more help.
@JaredAlexanderStevenson 8 ай бұрын
Hey could you help me out? How much did you put in between each border spindle? I am trying to figure out how many to buy and appropriate safety so my kids won’t fall through. Thanks!
@papacreaky 8 ай бұрын
Honestly, I made sure the kids heads wouldn’t fit. I think they were 4” O.C.
@JaredAlexanderStevenson 8 ай бұрын
@@papacreaky thanks! That’s helpful. 4” seems like good spacing
@mpicewe3023 8 ай бұрын
Thanks!!
@sam80495 9 ай бұрын
How long are the 4x4?
@papacreaky 9 ай бұрын
If I remember correctly, I think 10ft.
@TruckerDave215 10 ай бұрын
Your kids will remember this for ever man me all that time you put into this pretty amazing best dad on the block for sure
@kik0kike 10 ай бұрын
How long are the 4x4’s
@barryschultz4947 10 ай бұрын
thanks I couldnt get those E clips on didnt think to use pliers!
@ACEwers-cs3iv 10 ай бұрын
Oh? Your's actually came with the hardware? Must be nice.
@papacreaky 8 ай бұрын
Sorry about that. They sure know how to cut their cost, huh? :(
@JamesSmith-gk8sz 11 ай бұрын
All this without the use of a nail gun either, truly impressive. I still don’t understand why people use nail guns when they have unlimited time for projects. Screws developed specifically for fastening wood to wood are infinitely superior to even HD nails in nearly every way and can be removed with ease. Couldn’t tell if you bought treated lumber, but he only thing I would have added is two coats of “weatherall” paint for water proofing. Superior job sir. If every house in America was built with that level of care they’d last 75 years easily.
@papacreaky 10 ай бұрын
Thank you 🙏🙏 I wanted to make it stand the test of time for my kids, or for the next family. Some lumber is pressure treated and some is not. Building it near the beginning of COVID meant limited supplies.
@fancynecromancy 11 ай бұрын
I swear my rotar os on backwards
@davidvalencia8256 Жыл бұрын
What a Dad!! Freaking badass man
@raulambriz2203 Жыл бұрын
This video sucks it didn’t even show proper assembly it cuts off and shows a totally different set up and it doesn’t even explain anything
@louismcdonald1571 Жыл бұрын
Couldn't see when you were connecting towards the wheels.
@artemartem1134 Жыл бұрын
I like the jig you built for quickly cutting the bolsters to length.
@raymundosandoval441 Жыл бұрын
how long were the 4x4 please and thank u
@papacreaky Жыл бұрын
4” x 4” x 10’
@raymundosandoval441 Жыл бұрын
did you bury the 4x4s 2ft or 1ft under the ground@@papacreaky
@papacreaky Жыл бұрын
About 1.5’
@ciaranglennon4292 Жыл бұрын
Class, great work
@papacreaky Жыл бұрын
🙏🙏
@jasonroddey221 Жыл бұрын
Can you put the material list?
@papacreaky Жыл бұрын
Wish I could. I don’t have the list anymore. At the end of the video I showed my scaled orthographic drawings. Might be tedious, but you could count the number of 2x4, 2x6, 4x4, and plywood. Also, my day one video shows me stacking everything up before tarping it.
@jasonroddey221 Жыл бұрын
@@papacreaky no worries at all I do appreciate it nice build
@themagicdrum Жыл бұрын
About 8k worth of lumber right there
@papacreaky Жыл бұрын
The project materials, not including tools, cost around $1800 back in 2020.
@mikefeddersen2476 Жыл бұрын
As handy as you are, is there a feud going between you and your neighbor in the background? It seems if I had kids, I would get a potential tree that is obviously in need of removing dealt with. I'd hate to have my son crushed under it. 😢
@papacreaky Жыл бұрын
The neighbor refused to clean it up… She was less than helpful. The tree was fully on her property prior to falling. The likelihood of it ever falling more into our property was less than 1% chance. If anything it would fall back into her property. It’s hard to see from this video’s angles. At this point, it doesn’t matter we’ve all moved from that house about a year ago.
@katewoolf6059 Жыл бұрын
You sped through the most confusing part 🙄😂
@papacreaky Жыл бұрын
Sorry, it was my first ever KZbin video 🙏🙏
@mannyrosariofx Жыл бұрын
This is awesome. Well done
@papacreaky Жыл бұрын
Use needle nose pliers to line-up the tips of the E-clip with the groove/slot on the post. Then with decent pressure, it slides over and literally clips to the metal post. Best of luck.
@KimLaCapria Жыл бұрын
thank you! i was struggling with the erings, this solved it :)
@musa2775 Жыл бұрын
Anyone struggling with the e-rings: Put the bar on the 1" orange cylindrical rod inside the wheels. It just kinda free hangs there - this is correct! Set the e-ring in the groove, so that it balances with the bottom open. Tap once with a hammer. They're locked into place! The foam handlebars were much more of a headache. You have to twist them on. Twist the inside half first, then twist the outside half. Repeat ad nauseum til flush. 😅 Happy mowing!
@papacreaky Жыл бұрын
Thank you! I’ve also posted a comment and the information has been written in the description since publishing the video. 👍👍
@flyingrichie Жыл бұрын
Is water pooling an issue with the flat floor surfaces?
@papacreaky Жыл бұрын
I’d get a little pooling, but I also built it with the slightest pitch for it to drain off the side. The Rock Solid coating prevented damage.
@imperioindependiente7849 Жыл бұрын
Thank you so much, those E rings blow my mind 🤭
@chalison Жыл бұрын
Thanks for showing us how to attach the handle to the mower in an easier way. The way it says to do it in the instructions is way too difficult. After trying the manufacturer's method unsuccessfully, I did it your way and it was a breeze! So glad I found your video! 🙂 (I also loved the bird songs in the background, Cardinal and Blue Jay among them.) 🐦
@Brainhoneywalker Жыл бұрын
This really helped! Thank you. Ready to mow.
@mickaylahuffner8583 Жыл бұрын
Would love a list of materials! Trying to replicate this!
@papacreaky Жыл бұрын
Wish I could share one with you. A lot of planning was on scrap paper, so I’ve lost those over the years. At the end of the video it shows my schematic drawings on graph paper. I think my scale is on it. It’s mostly 2x4s, 4x4 posts, plywood, 1x1 balusters, and buckets of deck nails. You might be able to count out the numbers of lumber you need from screenshots of the video. Good luck!
@Jason-rn4jk Жыл бұрын
After seeing his muscles shadowed going over 2 passes, I decided to go with an electric mower instead.
@papacreaky Жыл бұрын
Truth be told, I’ve since moved and have purchased an electric mower as well, larger property now. 🙏😀
@gear1455 Жыл бұрын
The getting in the drawers was probably the most frustrating part for me thank you
@BB-nn9en Жыл бұрын
Hey Papa Creaky. I was wondering how this is holding up. What's the quality of the veneer like and is it more durable than some office max or wal-mart desk with their paper like veneer? Thanks!
@papacreaky Жыл бұрын
I am so sorry for that extremely late reply, I haven’t been very active on my channel. For what it’s worth, it held up very well for our intended use, children’s clothes that were packed to the brim. We no longer have it since we left it with our last home a year ago.
@BB-nn9en Жыл бұрын
@@papacreaky Thanks for the reply! I ended up going with a malm desk and the uhh.. pine dresser. Forget what it's called but it's good enough for my children to destroy.
@therealist1103 2 жыл бұрын
Thanks for the handle bars but showing the other side helps for the attaching part.
@Sabbathissaturday 2 жыл бұрын
Holy moly! I’m a 53 year old woman and just put mine together. This helped. I live in the high desert of Texas. Loads of rocks, cactus, stickers. I just gave it a spin and after 15 minutes my arms, legs, and what used to be my abs were burning!!! What an intense work out. If I can make myself do this 5x a week, I’ll be kicking asses and taking names!! 🤣👍🏻
@tigrewang 2 жыл бұрын
COST?
@papacreaky Жыл бұрын
Without accounting for new power tools, I’d have to estimate from memory that it was about $900. Lumber prices spiked at the beginning of the pandemic.
@NinaNuqui2031 2 жыл бұрын
That playground looks fun! Really good job, I would like to know the dimensions, materials and tools you need. Congratulations it looks amazing 👍
@papacreaky 2 жыл бұрын
RyobI impact drill, circular saw, miter saw, jig saw, belt sander, orbital sander, drill, speed square, levels, chalk line, tape measure. Lots of 2x4s, deck screws, cement. My video at the end can be screenshot for the plans, the scale is one 1/4” box = 6”. Also, I have 8 or 9 other videos that go into more depth about building it.
@brittanybriseno5180 2 жыл бұрын
Wht is the length of the slide where it attaches at the top? We’re building a deck without the product in hand yet lol
@papacreaky 2 жыл бұрын
My playground time lapse video has an orthographic drawing at 11:36, scale is one box =6”. Here’s a link to the slide. www.homedepot.com/p/Swing-N-Slide-Playsets-Green-Apex-Wave-Slide-WS-8200/304863110
@1sornram 2 жыл бұрын
Thanks
@trebest52 2 жыл бұрын
Good morning!question, did you use 2x4 to build the top and bottom platforms? And how high from the ground is the top deck?
@redowl7322 2 жыл бұрын
At 11:36 I show my orthographic side sketches. The scale is 1 box = 6 inches or ~15cm
@quishakinlaw9012 2 жыл бұрын
Man I wish my hubby was THIS handy! Haha he’d rather pay someone to do it😂😂👏🏾
@papacreaky 2 жыл бұрын
I wasn’t always this handy. Time and dedication can make anything happen :)
@DrAdamAckerman 2 жыл бұрын
Outstanding work. One question, how do you know if it will holds up? especially the top floor, do you need an engineer to get those details first?
@vitalygnatyuk2644 2 жыл бұрын
What kind of question is this? He's not putting household furniture in the playhouse.
@mikefeddersen2476 Жыл бұрын
After initially putting the bracing and flooring in, he and his buddies had a wild keg party with taking turns body slamming each other on the top level. At the end of it all he decided if 1500 pounds of WWF punishment wasn't going through, it should be safe for his two kids and a few of their friends. 😂
@papacreaky Жыл бұрын
No engineer needed, good planning and plenty of fasteners 👍👍
@vi3tshortcak3 2 жыл бұрын
Can you share how much the whole project costed you?
@papacreaky 2 жыл бұрын
Around $1200, prices were higher at the beginning of the pandemic.