technically yugioh was first made by bandai lol

I have dabbled with Gundam animes but have been big into TCGs for 30 years. It's neat to see folks on the opposite of that spectrum Bandai TCGs have always looked interesting to me, but I just wasn't into the IPs. I like how the gameplay looks, and some of the foil cards previewed look incredible! I hope they are not too difficult to get

The card for life mechanic is closer to Pokemon than MTG.

Would alcohol markers work the same way for panel line cause I have just about every color possible

My personal opinion as to who the best Char Clone is would be Rau Le Cruset from Gundam SEED. The man is charismatic, intelligent, and a master manipulator. His motivation is understandable, he's a threat, ruthless, and he's a foil to the protagonist. Kira believed that most people are good and worth saving, meanwhile Rau believed no one is good and that humans should go extinct. As for Prospera, I think she is a decent Char Clone. While she's no ace pilot, she is still threatening. She's greatly intelligent, a master at manipulation, and borderline sociopathic. We understand her motivation and are somewhat sympathetic towards her, but we still want to see her stopped since she is absolutely deranged. She also plays perfectly well with the show's theme of child and parental relationships. She obsesses over her daughter and doesn't really care for her other 'daughter' (Suletta), because Eri was the first, and she's willing to sabotage the world all for Eri. Never underestimate a mother's love, because some of them throw morals and rational out the window.

The Vayaete and Mercurius gang getting some love at long last. I'm so here for it

Yep as a dad of 5 youngest 9 mm months oldest 13 I have had the joy of an abundance of scratch build parts 😂

Legend stuff

I was going to scratch build ones.of these . From anything I can find to make it style .😂 Lush 🤟

Have you tried 2 or more piece thermo plastic molds. Then, drilling the vent holes to allow excess drainage under compression. Then, compressing the mold with a vice, remove and secure with a G clamp until set. Clean up excess. Thermo plastic molds can last longer than silicone and be recycled a few times before the plastic degrades. Don't forget to use a mold release.

Do you have any solution? Because i really need to copy my missing gundam part.

I always had to wonder why they needed to press buttons on a device but needed a Mobile Suit to do so. I can't imagine how difficult it must have been to move the controls in order to do the precise movements to press multiple objects that small.

thanks so much man this helped me a lot

the G-gundam one would be wild.

Awesome to see someone from the locals appear after all this time! And cool to hear how modelers in general seem to just be cool cats. Some imperfections and mistakes add a level of character I don't think you'd get otherwise in your creations. Happy little accidents as Bob Ross would say haha Look forward to Hoskin again (should that happen)

I can imagine a really lazy spin-off light novel or manga about Margarita carrying Kamille's half sibling.

You have to add a cream of tartar to the acetone/p.cement runner mixture. This is the secret for anybody actually looking

*DANGAR*

you could put a little smoke machine in it for the extra dangar

Awesome

That looks dope. Good work man :D Also poor Kamilles mom in the background lol Nice little detail

Hell yeah Gundam Base was lit especially vibing with bystanders and feeling like we’re spreading the Gundam love ! AnimeNYC was AMAZING as well can’t stress enough how fun and enchanting it is to just hang and rep with the homies! I can’t even say it was a fun weekend because with the event we had early on it’s been a fun month all around !! I’m super proud and grateful for the squad and can’t wait for the world to see wht we got coming!! But huge shoutout to you guys for the support and Ofcourse the Coach for bringing us together 🦾❤️🤘🏽

16 my Brotha. Great video guys.

I know thay guy! 16 is a cool dude. Cool vid yall!

Awesome 🫡

Question! Where did you get that coil that helps extend the range?

Soo.... nothing changes, other than the inspiration of the Axis Shock?

I rather like the Barbatos. It's very unique an aggressive, almost animalistic. Maybe it would have been better for an original series rather than Gundam. Not really practical, but it is quite striking and remarkable. Where is my boy, the Turn A? Very unique in a different way than the Barby. The cockpit being on the crotch is a pretty funny visual gag. Is it the only Gundam that doesn't have a backpack?

I agree about the new generation of designers compared to the old generation. As a Macross fan, I know that Kawamori studied engineering in uni so he had a very strong base of knowledge of real world machines. Obviously he loves the F-14, but he also incorporates a lot of design ideas from racing cars. Fighter jets and race cars, it's no surprise he excels in designing fast and sleek mecha. A lot of modern mecha look like they were designed by people who probably know more about mecha than real military machines. Maybe that's why I gravitate to the more plain and functional designs of the 80s. I'm not really a fan of really busy mecha designs with a ton of stuff hanging off its back or random spikes everywhere. P.S. The one time he designed MS's for Gundam, he didn't design any transforming suits. It's strange. With how weird and awkward transforming machines in Gundam tend to look, Sunrise probably should have picked his brain on how to design them.

Okawara loved the Zaku. You can tell because a lot of his designs afterwards looked very much inspired by it. The silver mecha from Panzer World Galient (piloted by the guy who looks just like Chirico Cuvie) looks like a silver Zaku. The mecha in Votoms look like Zaku made even more realistic. I watched a ton of Sunrise mecha series from the 80s recently and you do see Okawara's design philosophy. Villain suits almost never look sleek. They tend to be bulky. Only hero machines get to look sleek and lithe.

I love all gundams except the turn a gundam because the cock-pit 💀 and the moustache. And thunderbolt mech design is peak

Sad I missed the stream but I certainly learned a lot watching it. Had no idea Okawara did the original, Wing, AND Seed. Ya'll just sealed him as my personal favorite Gundam designer haha Kawamori gets honorable mention for 0083

An interesting insight for sure...

Great stream I missed it but this was awesome, your idea about including the crew in discord is a good idea too

Interesting. Definitely gonna have to save this for later

Here I was expecting a discussion about Gundam video games, only to be reminded we live in a cyberpunk dystopia and are headed towards a techno-gilded age and/or corporate feudalism. So thanks for cheering me up, guys!!!

First time watching this scene "ohh noo, that's horrible". Watching it after knowing what happens to a person in space when they suffer quick pressure changes "Well it could have been worse... Much worse"

Kamille did not get injured at the end of Zeta Gundam....

A very interesting discussion for sure. I noticed some errors here and there, but overall, you guys seem to have a good grasp of the material. Kudos.

what is that white clear mold material?

Scribing and painting are the two skills I really want to improve. I recently finished my first real custom project, a G3 Gundam that is just multiple shades of grey to be closer to Tomino's original idea for the RX-78. I used an MG 2.0, so it was basically a blank slate to add detail to. I made a few fin-like addons using bread bag clips (learned that from a Zaku Aurelius video) and added some piping-like detail to the backpack by recycling pieces of the runner. As for adding panel lines, I cheated and got some of those scribing templates. But one thing you really need to take note of is making sure both parts are oriented in the same direction when working with mirrored parts. I thought I was done with the model, painted everything, did the finishing matte coat, then I noticed something was off. One of my scribed patterns on the ankle armour was upside down. So I had to strip off the paint from both parts, putty them and I just gave up on scribing those parts out of frustration and just added some pieces of bread clips to them. But I am satisfied with the end result. It isn't perfect. My paint job is not perfectly even (probably because I'm using a cheap portable airbrush instead of a proper compressor) It's a little rough around the edges. But, at the end of the day, it still looks nice on my shelf.

You are good. but I tried failing some holed or missing if it can add little more again in hole and missing?

I can't say I've rewatched 0079, Zeta and CCA enough to have memorized everything. But the impression I get from Char is that he is someone who had the potential to be a great man who could have done great things for humanity. But constantly seeing the cruelty, greed and callousness of people, along with his own darker nature drove him to lose hope and become cruel himself. If his father wasn't assassinated and Char succeeded him as leader of Side 3, I think Char could have led it to a golden age. But his father was killed and that planted the seeds of resentment and anger so deep inside Char that he could never escape it. I think there were times when he tried to be a better man, like in Zeta and in Char's Deleted Affair, but those ended in tragedy. Or maybe if Lalah survived, she could have steered Char to the light. By CCA, I get the impression that Char didn't even care about leading his new Zeon. He didn't care about Newtypes. He didn't even really care about humanity at all. I think Char just wanted to have a final duel against Amuro and die in the process. Why else would Char leak the psycho frame technology to make it a "fair" fight? He just lost hope for anything and was using everyone just so he could die in a glorious battle against his greatest foe. If CCA was a series or 6-8 episode OVA, they could have done a better job explaining Char's motivation in CCA. Maybe in the novel Tomino based CCA off of (Gundam Highstreamer, which has never been translated to English) there is detail that will help elucidate the question. As it is, CCA leaves many Gundam fans scratching their heads over the inconsistency. Maybe it's different for Japanese fans who can read all the supplemental material.

You know in some mecha anime, when a fight is over and the mecha dumps it's coolant with it's vents opening up and steam shooting out? You should figure out a way to incorporate that into a model kit. It would look really cool for a competition piece.

Bawoo doesn't skip leg day

This is gold. Thanks a lot! What paper size do you recommend I print on? A4 or Tabloid?

where did you find the mini ms? ive looked everywhere and all i can find are the ones that came in the old playsets in the early 2000s.

i think Kamille living would have stablized Char there still would be Char taking back Neo Zeon but i dont think they would dropped Axis.

6 yrs later and you helped me out brother !