This is how we do it DIY

Пікірлер

@leticiariveros1347 7 күн бұрын

Do you have a Part 2 video on how to cover ?

@thisishowwedoitdiy2477 7 күн бұрын

Yes I do go check it out

@BlackShadow233 7 күн бұрын

I have these on my jeep looks really good

@thisishowwedoitdiy2477 7 күн бұрын

They look great!

@anthonyalexander3519 10 күн бұрын

What’s the next size wheel you thinking of going with?

@thisishowwedoitdiy2477 10 күн бұрын

Thinking about pulling the trigger on some 295’s but may go bigger I have a 3 inch lift now but considering on 4 inch lift or 6 inch lift will see ! What do you have?

@anthonyalexander3519 10 күн бұрын

Right now I have the same set up and size like you but thinking of going with a mud tire

@gondolacrescent5 10 күн бұрын

Nothing worse than having to look at and deal with toilets…disgusting!

@thisishowwedoitdiy2477 10 күн бұрын

It is a terrible job, that’s why we get paid well for plumbing, But these tips will save you some money!

@-Nathan87- 11 күн бұрын

Plasti dipping mine just wanted to see a look.....looks good make sure you replace those door handles with black too 😉

@thisishowwedoitdiy2477 11 күн бұрын

Interesting never looked into it, I’ll check it out!

@RepublicanClooney 15 күн бұрын

Porno Red is for Porno things! Tacoma Life!

@MrMackey9 17 күн бұрын

Don’t buy dewalt mower. I have a gas one and it sucks. If you like getting blasted with grass while the bag is on, then this is the mower for you. The bag sucks. The flap to keep the bag secured constantly is opening and the bolt to keep it secured comes loose. To change the height you mine as well he a strongman to get it to move. The mower sucks. Pay more for a reputable brand.

@thisishowwedoitdiy2477 17 күн бұрын

Thanks for feed back sounds like you got a bad one

@rurban9874 19 күн бұрын

Looks good with the black door. A jack nut is also a inexpensive option if the original screw holes get damaged during removal.

@thisishowwedoitdiy2477 19 күн бұрын

Great tip!

@PowerTwister_QLe 28 күн бұрын

Very nice I love it too ❤😊

@thisishowwedoitdiy2477 28 күн бұрын

Super bright!!

@theroyalfamilytube613 Ай бұрын

🎉🎉🎉🎉🎉

@thisishowwedoitdiy2477 Ай бұрын

Get it built and make some money!

@theroyalfamilytube613 Ай бұрын

Thank you so much sir. You help and also saved me $$$ from my wallet ❤❤❤❤

@thisishowwedoitdiy2477 Ай бұрын

Glad vid was of much help!!! Like and share!

@jc.daguila Ай бұрын

Thanks for your time!

@thisishowwedoitdiy2477 Ай бұрын

Glad it was of help!

@jsar8873 Ай бұрын

My manual says do not pull it backwards unless really necessary.

@thisishowwedoitdiy2477 Ай бұрын

Correct only if necessary

@jsar8873 Ай бұрын

He has the bag on the back as well at the shoot on the side? Shouldn't it be one or the other?

@thisishowwedoitdiy2477 Ай бұрын

Yes it’s one or the other , was to excited to notice I had both of them

@devildog1168 Ай бұрын

What kind of front bumper do you have?..I am liking this setup

@thisishowwedoitdiy2477 Ай бұрын

I have a body armor hiline series bumper with extended wings which are sold separately

@RepublicanClooney Ай бұрын

What Tonneau cover do you have? tia

@thisishowwedoitdiy2477 Ай бұрын

What do you mean?

@RepublicanClooney Ай бұрын

@@thisishowwedoitdiy2477 the bed cover

@RepublicanClooney Ай бұрын

@@thisishowwedoitdiy2477 The bed cover in back

@scottsanders546 Ай бұрын

Nice to know to to change the gas door...but the curve on that black door doesn't match the old one.

@thisishowwedoitdiy2477 Ай бұрын

Mine does , and that’s interesting what year do you have

@markmalone5785 Ай бұрын

Very helpful. Thanks for the link. I redid mine. The part fit perfectly. Again, VERY helpful!!

@thisishowwedoitdiy2477 Ай бұрын

Love it! Glad it was of much help!

@pufangdavis3332 Ай бұрын

I dropped cap from that bold head clean bottle. I didn’t get it out. Water running slowly.

@thisishowwedoitdiy2477 Ай бұрын

That la terrible hope you can get it out good luck!

@zeekstr6965 Ай бұрын

Looks good!!

@thisishowwedoitdiy2477 Ай бұрын

Thank you!

@Moistnsquishy Ай бұрын

I wanna put these on a tundra

@thisishowwedoitdiy2477 Ай бұрын

That would loook sick!

@jonnyqwst Ай бұрын

Useless.

@thisishowwedoitdiy2477 Ай бұрын

What do you need help in?

@stevecarrillo-fq2jd Ай бұрын

Had to be a Taco male. 😅😅

@thisishowwedoitdiy2477 Ай бұрын

Tacoma all the way!

@stevecarrillo-fq2jd Ай бұрын

Lol don't follow this guy.

@thisishowwedoitdiy2477 Ай бұрын

Thanks God Bless You

@Cliffdodger Ай бұрын

What made it brake?

@thisishowwedoitdiy2477 Ай бұрын

Honestly I’m not even sure what happened

@Cliffdodger Ай бұрын

@@thisishowwedoitdiy2477 I guess I’ll spray mine down oil.

@jafo1297 Ай бұрын

"Fox leather" lol faux leather.

@thisishowwedoitdiy2477 Ай бұрын

Hahahah

@albertoc17 2 ай бұрын

Who mows with the side discharge and bag on at the same time? 🤦🏽 Is this video a joke?

@thisishowwedoitdiy2477 2 ай бұрын

Thanks for watching God Bless You

@hsjsjnsjsj4374 2 ай бұрын

Aulia Jovika as Princess Aurora/Sleeping Beauty

@thisishowwedoitdiy2477 2 ай бұрын

@autumnphillips1556 2 ай бұрын

What happens if u don’t have a vacuum

@thisishowwedoitdiy2477 2 ай бұрын

Nothing, you can still remove what’s in there, the vacuum just helps remove water / and can get something stuck in there easier, but if you don’t have a vacuum, pull the toilet out and use hanger / snake to pull/ push item out good luck!

@theroyalfamilytube613 Ай бұрын

I removed without the vacuum too nothing happened ❤

@mattcahill3182 2 ай бұрын

I’ve had the same issue for awhile but finally looking to fix it… from what I see you have the shorter box? I have a 2017 long box, wondering if it’d still be the same part number ? If not do you know which one is the correct one? Thanks in advance!

@thisishowwedoitdiy2477 2 ай бұрын

Great question, it should be the same, hopefully you should be able to fix the issue! Good luck!

@georgiamagers8599 2 ай бұрын

2015 Highlander but with captain seats in the middle I like the look of these seats and your video installation Do they have the set for bucket seats?

@thisishowwedoitdiy2477 2 ай бұрын

Thank you, you know I believe they may have it go on ther website to see but I though I saw those there good luck!

@RichardKnicks 2 ай бұрын

What running boards and what skid plate? Looks great! Thanks for the video!

@thisishowwedoitdiy2477 2 ай бұрын

Running boards are stock will be changing those after I install the new Body armor pro series 2 for rear bumber, kid plate also is stock , stuck between getting TRD or CBI thank you!

@RichardKnicks 2 ай бұрын

⁠I have a 2009… do they make those for that year?

@matthanlon8121 2 ай бұрын

Your video was fucking useless!

@davecs7709 2 ай бұрын

Do you think I can use 1/8 pvc sheets to wrap it

@thisishowwedoitdiy2477 2 ай бұрын

You know what I’ve never tried it with that material but from the looks of it it may work, just make sure it’s thin and it’s not the foam one

@waltercondi4584 2 ай бұрын

I probably won't buy these for two reasons. Although they're probably half the price of WeatherTech I don't like the fact that AVS left their trademark on it and not just leave it all black. Secondly they look extremely flimsy. But nice video

@thisishowwedoitdiy2477 2 ай бұрын

I hear ya, trademark does start fading away after a while though , but they deff are sturdy

@waltercondi4584 2 ай бұрын

@@thisishowwedoitdiy2477 if you say that they are sturdy I would consider them

@ea466 2 ай бұрын

I love the repurposed toilet bowl"screws" lol

@thisishowwedoitdiy2477 2 ай бұрын

Exactly! Jajajaja works great!

@rocksrcool5 2 ай бұрын

The hooks on the seat bottom are impossible

@thisishowwedoitdiy2477 2 ай бұрын

Deff takes time to get right!

@rocksrcool5 2 ай бұрын

@@thisishowwedoitdiy2477 I got it and it looks amazing. Your video helped. Thanks brother!

@nelsonromero512 2 ай бұрын

👍🏼👍🏼 💡

@thisishowwedoitdiy2477 2 ай бұрын

Thank you!

@ALittleBitOfEverthingDIY 2 ай бұрын

Did Batman show up when you shot that thing straight in the air?

@thisishowwedoitdiy2477 2 ай бұрын

He sure did!

@maximillianpatterson639 2 ай бұрын

I have the same exact problem with the hinge bolt bending and breaking

@thisishowwedoitdiy2477 2 ай бұрын

Time to replace that door!

@zlow1995 2 ай бұрын

Just tried this and found a bath toy , good tips

@thisishowwedoitdiy2477 2 ай бұрын

Nice! Glad it helped out!

@Eastsidegeorgiaboy 3 ай бұрын

For future reference, leave the music out of your video. It sounds like shit, and it takes away from the video. It's also distracting. It does not add any value to the video.

@thisishowwedoitdiy2477 3 ай бұрын

Glad the video helped you out! 🤣

@YeahPablo83 3 ай бұрын

Can I do these from Sheetrock?

@thisishowwedoitdiy2477 3 ай бұрын

I’m sure it can be done but I don’t recommend it

@Skyesballoons1111 3 ай бұрын

How much did you spend on materials?

@thisishowwedoitdiy2477 3 ай бұрын

About 80 dollars for all materials at Home Depot Probably more now with ebething going up, but cheaper to build and rent it out for 150-200 per event plus other decorations you can add to it

@Skyesballoons1111 3 ай бұрын

@@thisishowwedoitdiy2477 absolutely, I agree. Thank you for this tutorial, top best I’ve seen by far and my absolute favorite.

@thisishowwedoitdiy2477 3 ай бұрын

@@Skyesballoons1111 thank you! Like share subscribe and be sure to check out my other videos for other walls we make / rent out

@kshowalter1 3 ай бұрын

You say 0 offset, but I can't find those wheels in a 0 offset anywhere.

@thisishowwedoitdiy2477 3 ай бұрын

I ordered them through 4wheels and parts try there good luck

@nicolasvazquez9976 3 ай бұрын

Love this project… what size nails and screws were used?

@thisishowwedoitdiy2477 3 ай бұрын

Awesome glad you enjoyed it! I used wood deck screws 1 1/2 That should get the project done No nails Let’s build it and make some money champ!

@richardrodriguez1128 3 ай бұрын

Thanks for the video install. Never did any electrical work, but it seems easy to install. When you connected the light bar , how do you know to connect it there vs other spots? Do you go by the fuse that comes with the light bar? Sorry, I’m not good with electrical work. Thanks

@thisishowwedoitdiy2477 3 ай бұрын

Thanks! If you have the Auxbeam box like I do you can connect it to any of the slots but make sure to replace/ plug in the fuse your light bar recommends in the manual your light bar comes with.

@sc7254 3 ай бұрын

Looks great, I have Black Rhino Sentinels on my truck and love it

@thisishowwedoitdiy2477 3 ай бұрын

They them are awesome to!

@thisishowwedoitdiy2477 3 ай бұрын

Thank you!

@travblurr8043 3 ай бұрын

Does anyone make a bumper similar to the Body Armor that doesn't require you to cut the OEM bumper?

@thisishowwedoitdiy2477 3 ай бұрын

That’s a good questions I’ve tried loooking, but have not found anything sorry

@jordy2819 3 ай бұрын

You are the best nice job..

@thisishowwedoitdiy2477 3 ай бұрын

Thank you glad it was of help go check out other tips I have on my channel

Ең жақсы KZbin

Пікірлер