TooHighPsi

Пікірлер

@alexperzfishing Ай бұрын

Please add mounting provisions on the control box. Mounting with a zip tie is bootleg.

@32krazy1 Ай бұрын

is there any way to find the computer serial # if you dont have the original box?

@toohighpsi Ай бұрын

If the controller wasn't shipped with V63 preinstalled, it's a pre5000 serial number.

@32krazy1 Ай бұрын

@@toohighpsi will I see the serial# when the ecu is fired up?

@toohighpsi Ай бұрын

@@32krazy1 you’ll see the firmware version at the bottom of tuner pro when you power it up.

@joeandwyattdavis5811 2 ай бұрын

Does this work on the l83 trucks ?

@toohighpsi 2 ай бұрын

Yes it does, one wire needs to be pinned to a different location, just reach out when you’re ready to get going and we’ll be happy to help you out.

@lexustech48 3 ай бұрын

What a badass product!! If I end up getting a 6th Gen SS, I want to do a remote mount turbo kit on E85. You guys just solved my fueling issue. Hell yes!

@Chainspike101 3 ай бұрын

I have one question, what pumps in the tank are handling this? I like this setup

@TheSundaeDrive 5 ай бұрын

So wen running with the Reflex Lambda control, what do we need to do with the VVE tables? Just leave them how they are if they were already pretty dialed in before installing the Reflex? Are you running a MAF only tune?

@toohighpsi 2 ай бұрын

Closed loop from the Reflex doesn’t need to care about VE tables, it will simply correct the A/F to the desired ratio when it is in operation.

@projektperformance 7 ай бұрын

Do you guys offer a kit for the tee setup you used for this kit?

@2thegridmotorsports872 7 ай бұрын

great explanation! Thank you!

@toohighpsi 2 ай бұрын

Glad it was helpful!

@DPro 7 ай бұрын

How do you regulate Fuel Pressure at the Port injectors ? The DI regulates as normal… confused

@lovthaigurlz 7 ай бұрын

You can tell you have a good video when the clip ends as soon as they cross the line.............literally the front tires cross the line and it jumps to the next video on KZbins playlist. Mine went right to Dana White talking shit to another fighter.

@lovthaigurlz 7 ай бұрын

Your channel needs to show more of the clip. You splice clips together and we miss things like the launch off the line.

@kevin-jm3qb 7 ай бұрын

oh oh oh b58 guide please!!!!!! we a90 supras wanna beat the LT vetts

@toohighpsi 2 ай бұрын

I believe that B58s have factory Wide Band feedback, so you won’t need it from the Reflex.

@kevin-jm3qb 7 ай бұрын

You sir are a saint

@mikeflores2000 8 ай бұрын

Unfortunately I don’t have $60,000 for a used model. The Lexus LC500 and IS 500 equipped with a 5.0-liter V8 engine that is part of the Yamaha-developed family. It's known for its performance and is designated as the 2UR-GSE engine. Carbon buildup on intake valve not occur due to dual port injection. Gasoline will wash over intake valve.

@mikeflores2000 8 ай бұрын

Looks very expensive to add port injection to C7. Can you post an estimate for a base C8? Is this system similar to OEM Sequential Port Injection in the C6?

@goblue2708 8 ай бұрын

Quick question. With the port injection setup + Magnuson 2650 + tuning, can we still use a throttle controller? Or, will that not work with this setup? Thanks

@whome101 8 ай бұрын

does that work for blackwing? global B

@DB22_2SS1LE 8 ай бұрын

Noticed that you mentioned that you are using innovative lc-2 wideband sensor for your lambda readings with reflex but are you also using that for reading with hp tuners? If so how did you set the math up for that?

@toohighpsi 2 ай бұрын

The LC-2 has two outputs, one is configured for 0-5volts and the second configured for 1-0volts. I re-configured the second output with the innovative software to also be 0-5volts and then connected one output to HPtuners and one output to the Reflex.

@AgentSmith837 8 ай бұрын

Does it work with the global B stuff?

@jessemurray1757 8 ай бұрын

This question has probably been asked before, but have you guys given any thought to selling the necessary lines as a kit?

@imprtths98 9 ай бұрын

looking to add this to my 2016 ss with an lt4 blower. seems like a better choice vs going lt4 hpfp and injectors.

@AllSoWavyReese 10 ай бұрын

What are those 2 throttle body looking things? They come with the super charger?

@denerrthomas8647 11 ай бұрын

Can the LP port plates work with the stock blower also or mainly for the 2650 ?

@toohighpsi 11 ай бұрын

SC plates are the easiest to use with the Stock 1740 supercharger. LP plates will work with the stock, but you will need to modify the valve overs and coil locations as outlined by Magnuson or use our billet valve covers for proper clearance. Plate thickness is the same between SC and LP so it just depends if you ever plan to switch to a Maggie - in which case the LP are a better long term option.

@user-zp9zu8wf6v 11 ай бұрын

I just bought this same setup and will be running an additional fuel pump. Do you have the additional parts list for fuel line connections?

@toohighpsi 11 ай бұрын

See our Camaro blog for details, the line routings are different, but the parts list at the bottom of the blog is essentially the same: toohighpsi.com/blogs/news/camaro-fuel-line-routing

@user-zp9zu8wf6v 11 ай бұрын

Thanks for the response. Once i install the plates and harness into the ECU, can the vehicle be driven to the tunner.? Or will it need to be setup on Tunner Pro prior to be driven?

@toohighpsi 11 ай бұрын

@@user-zp9zu8wf6v you will be able to drive it to the tuner. System will not operate at all until values are entered into the system by your tuner.

@MrChucktown09 11 ай бұрын

If youre running a low side fuel system would you use that to supply the port injection and use the factory pump to supply the factory DI system?

@jessemurray1757 8 ай бұрын

If you notice, the whole system is fed from the single factory fuel line.

@MrChucktown09 8 ай бұрын

@jessemurray1757 yes I noticed that. But that's not my question.

@MrChucktown09 8 ай бұрын

@jessemurray1757 yes I noticed that. But that's not my question.

@brianlopez8196 Жыл бұрын

Crazy power

@briank457 Жыл бұрын

Will this clear the hood liner on the c7 Zo6?

@toohighpsi 11 ай бұрын

We haven’t tried, but I don’t believe so, we’ve always removed the hood liner on this application.

@Losman666 Жыл бұрын

0:09 2:16

@Losman666 Жыл бұрын

0:23

@NousDefionsIntel Жыл бұрын

Awesome video. Very informative. I will be getting this kit for my 2015 Z soon.

@the_lippmann Жыл бұрын

easy install on 2015 sierra 1500 - X1 connector pins for can hi and lo are exactly the same. Cam signal sensor maps to X3 connector - pin 33. Thanks for the help guys - now to wrap up some loose ends on the blower and tuning time!

@minibikemadman 10 ай бұрын

what blower do you use on a 14-18 1500 5.3 to allow the port injection? I'm looking for a 2650 on a 18 1500 5.3.

@the_lippmann 10 ай бұрын

@@minibikemadman i believe the toohighpsi kits address the major manufacturers (whipple, tvs, maggie, etc)... i have a whipple 2.9 on my truck - its swapped to a built LT1 but they make blower kits for the 5.3 as well..

@miguelleon6914 7 ай бұрын

Hey is the pin out diagram for the 2016 model the same as your 2015 ?

@the_lippmann 6 ай бұрын

hey i missed this - i would assume yes but not sure 100%

@connershupe7975 Жыл бұрын

Is there any modications you have to do to the fuel system such as lt4 direct injection injectors, lt4 high side, or lt4 low side? Is there a auxillary fuel pump? What are the power limits

@toohighpsi Жыл бұрын

That's up to you, we generally recommend leaving the high side stock, there's not really any reason to change it. You will need a low side pump capable of delivering enough fuel for the power level you desire. There isn't a power limit to the port, with 1000cc injectors you're good to well over 1200 RWHP on full E85, if you need more, simply switch to bigger port injectors.

@sayyoulovesatan666 Жыл бұрын

Where do the xdf files come from?

@samlupascu9106 6 ай бұрын

I seem to have a similar issue

@sayyoulovesatan666 6 ай бұрын

@@samlupascu9106motiv has the files for tuner pro on their site.

@toohighpsi 2 ай бұрын

toohighpsi.com/blogs/reflex-firmware-1

@sayyoulovesatan666 2 ай бұрын

@@toohighpsiway too late my guy hah figured it out not long after I posted the question. Thanks for the reply though

@therealmaxandthevoices Жыл бұрын

when i get a v8 car in the future, i wan't this blower. for the SOUND. not the power. although i might drag race with it. it's gonna be a corvette, C7. i hope they get to fit this blower on that car.

@andrewg.2165 Жыл бұрын

9.93 my friend

@toohighpsi Жыл бұрын

Thanks, that was the easiest 3 hundreds I've ever found!

@lloydchristmas8282 Жыл бұрын

I have a 2018 sierra denali 6.2 l86 with a 2.9L Whipple blower on it, well this work or do you design a kit for my truck?

@toohighpsi Жыл бұрын

It will, you need the SC plates with the Bosch 78 lb/hr and ReFlex controller. Only difference on the trucks is the Camshaft signal wire needs to go into PIN 33 of the X3 connector, everything else is the same as LT1/LT4.

@Aaron-ef5so Жыл бұрын

SWEET!! Pulling some G’s in the C8. Way to push those tires to the limit Mike!

@stevenanderson6244 Жыл бұрын

That was a cool video.

@ttzfer Жыл бұрын

Purty sweet 👍

@corneliusoliver4632 Жыл бұрын

Omg this Camaro is next level

@all4bspinnin311 Жыл бұрын

Set tunerpro to parameter category - it organizes tables

@oodakdak Жыл бұрын

I would really like the option to be able to add in a CANBUS wideband so there is no chance of a voltage offset skewing the Lambda (5V input) Is this something that could be configured in the future>? AFR500CAN From Ballenger Motorsports would be an awesome feature

@toohighpsi Жыл бұрын

It’s definitely possible, I’ll ask MOTIV and see if it can be released in one of the future updates.

@horsepowerfactorytx Жыл бұрын

This.

@TheSundaeDrive 5 ай бұрын

This would be great

@85net Жыл бұрын

If my reflex+ is already installed and running well and I decide to update the firmware to version 5.0, will I need to take the car back to the tuner for a retune?

@toohighpsi Жыл бұрын

No, the firmware update will not change your BIN file settings. You might need your tuner’s assistance to setup the closed loop for your vehicle though if you decide to utilize that feature.

@gevpwr6976 Жыл бұрын

Very cool, can't wait until it's dual wb

@GMVracing Жыл бұрын

Just ordered our first 'Lid". These guys are so easy to work with and the port injection is recommended by many of the top performance shops. Looking forward to the port injection, but just doing the Lid first. Will report back.