Wouldn’t be willing to sell this file would you? I’ve never been able to get that kind of detail with a v bit.
@larrywatson62529 күн бұрын
That was amazing cool ! Thanks
@armidaperez536023 күн бұрын
Been praying for you glad your ok
@dh1569Ай бұрын
Great video. And finally, I've found a build that extends the verticals table supports above the work surface. I kept thinking the most difficult part of the build would be designing a sturdy gantry - problem solved. I don't understand why more machines don't use this configuration.
@keithparker9380Ай бұрын
Hi Brian nice to see you again. Your CD player has a small hole in the front, you can use a paper clip to open it.
@simonflrАй бұрын
loved this clip!
@SmokeysCNCWoodworksАй бұрын
Thank you and thanks for watching!!
@rogerjette5498Ай бұрын
Brian great to see you again. You might want to pick up a used Windows 7 machine for a back up after you get yours running. They are going for dirt cheap. If I lived near you I would help.
@SmokeysCNCWoodworksАй бұрын
Yeah I picked this one up off eBay for next to nothing, I’m working on another right now, in case my guy can’t fix this one
@JohnBurton-d3jАй бұрын
Glad to see you alive and well brother welcome back. . .
@SmokeysCNCWoodworksАй бұрын
Man I’m trying I’m hoping to get going soon!!!
@mikerickard5046Ай бұрын
Welcome back
@SmokeysCNCWoodworksАй бұрын
Sooner rather than later I hope I’m ready to get back going
@randyaustin5209Ай бұрын
i know a guy....just saying.
@SmokeysCNCWoodworksАй бұрын
If you wanna figure it out I’ll let ya and I’ll pay ya!!
@CynthiasCraftsandmoreАй бұрын
Hi Brian, It's good to see you again. Thanks for the update. You definitely have had a lot happening. TFS! Blessings to you my friend. Have a blessed week. ✝🙏🏼💕
@SmokeysCNCWoodworksАй бұрын
Thanks, you too!
@SmokeysCNCWoodworksАй бұрын
Thank you we are working our way through it
@tonywoolums9673Ай бұрын
Life happens and nothing you can do but go with the flow! Sounds like you're doing that and can't wait to see you back! Prayers for you and your family! Hang in there!
@SmokeysCNCWoodworksАй бұрын
Life does happen, my career has put me up front and personal with a lot of loose and life lost, my dad doesn’t truely understand how I’m understanding of my mom’s situation
@SmokeysCNCWoodworksАй бұрын
Loose equals loss. WAs depending on some iPhone magic there
@JohnColgan.Ай бұрын
Just glad to see you back, glad the ticker survived all the hassles, been worried was so. Long!! Looking forward to see you carve again in your custom built shop. Guess a shop tour be another video idea!
@SmokeysCNCWoodworksАй бұрын
Oh I’ll be doing a shop tour when I get it squared away, it’s a mess right now
@TxStangАй бұрын
life happens and you just have to go with the flow , glad you are alive and well
@SmokeysCNCWoodworksАй бұрын
Yeah we are trying fight our way through this one
@dadzilla13Ай бұрын
Good to see you again brother man.
@SmokeysCNCWoodworksАй бұрын
I’m working at it, ready to be back
@4-6-3DPАй бұрын
Hi Brian. Thx for the update ! Regarding you stuck CD drive, use the paper clip trick another commenter mentioned. I’m wondering if your tech guy left a win 10 dvd in there. Worst case, remove the power connector from the drive, which will take it out of the equation.
@SmokeysCNCWoodworksАй бұрын
I’m thinking there is a a win 10 cd in there and the cd rom fried, I’m taking it back to him and I don’t care how he gets it fixed, I’m just ready get going again
@phillully4472Ай бұрын
Brian, yes you been gone for ever.. but I didn't forget ya... because ya made me one of your CNC project which was a (CROSS with a US FLAG theme). Hope you and your family are Well?.
@raymondfrato367Ай бұрын
I'm sure one of your viewers has an old windows 7 laptop they could donate to the cause.
@SmokeysCNCWoodworksАй бұрын
Most of us are well, (my mom, cancer) is what im referring to, lots of driving to doctors appointments and treatments, it’s all good, it’s all a part of life, I’m just glad I’m retired and able to help
@hendrixwoodworking4586Ай бұрын
CD rom. Paper clip in the tiny hole in front will open it up.
@SmokeysCNCWoodworksАй бұрын
Well I’ve tried that and nothing is happening, I think it is truely fried, im about to the decision that im just going to have to get a new computer to make this happen
@hendrixwoodworking4586Ай бұрын
@@SmokeysCNCWoodworks the paper clip is not for a switch. It pushes a small lever inside about 3/16 " movement. Straight in. Should just push the tray out 1/4". Then you can pull it open. It takes a little pressure to push it in to over-center the lever inside. With power off. Of course that only gets it open.
@hendrixwoodworking4586Ай бұрын
@@SmokeysCNCWoodworks I know the windows is a headache. If you continue, make sure no other cd in the drives 1. Change bios F1, usually, to boot from cd. Choose boot to OS That should give win7. Then delete the hard drive contents. 2. Repeat and choose install. Tell it to format C. Then reboot into bios and change the boot back to C. Its drawn out but can be done. Plus it's a pain.
@hendrixwoodworking4586Ай бұрын
Missed you. Glad you're back!
@SmokeysCNCWoodworksАй бұрын
Not there yet, but rest assured I’m working towards it
@goodwinmlАй бұрын
WOW, Happy your back. Missed ya from Eastern NM!
@SmokeysCNCWoodworksАй бұрын
I’m trying, with all that is happening, I hope to get some content up and running soon
@SmokeysCNCWoodworksАй бұрын
Yup I’m good just trying to get over some hurdles to try and get back to doing some CNC all the time
@thomasryan8218Ай бұрын
I always think about you and was hoping you were OK, a couple of times I commented on Arms family channel but never heard anything. I'm glad that you are ok..
@SmokeysCNCWoodworksАй бұрын
Lol…I’m not going to say much on that other than I’m not a very big channel, there is obviously more there but I won’t expound publicly
@mickkoldy13232 ай бұрын
What font are you using, I'm looking to do something similar for my grandchildren. Beautiful and clever -Mick
@SmokeysCNCWoodworksАй бұрын
Well I don't remember off the top of my head, and I can't really go back and look, i lost some files when my last computer crashed, thanks for watching
@kenschneiweis36772 ай бұрын
What brand CNC are you using? How long (hours) was the total shield?
@SmokeysCNCWoodworksАй бұрын
I don't recall how long this one took, my CNC is a DIY
@bigeasy_f1502 ай бұрын
couldnt you run a profile toolpath and cut it out with the cnc ?
@SmokeysCNCWoodworksАй бұрын
Yes, however I've just found its much faster to just run around the outside of something like this just once or twice with a straight bit and then cut it out with a saw
@mikemorrison3002 ай бұрын
Well done! Clear instructions! Thanks
@SmokeysCNCWoodworksАй бұрын
Thank you and thanks for watching!!
@joleneholcombe78223 ай бұрын
It's great!! Only opinion I have is the head seems a little too long, but that's just me! I love it! I'm making small ornament size ones with crafting items. I don't measure, just eyeball it. You could sell those and I bet they would sell like hotcakes! Yes, please make the snowman video!!
@SmokeysCNCWoodworksАй бұрын
Thank you and thanks for watching!!
@donaldsius88384 ай бұрын
How many feed rate and plunge rate on v bit cnc?
@donaldsius88384 ай бұрын
What is the painting that you use? Acrylic painting?
@supernev994 ай бұрын
Hiya Brian...Nev from Blankmania here....hope you're well...just checked in to see some of your latest videos but...
@armidaperez53605 ай бұрын
Gave this to my son & happy to say he's fully committed to the Lord & now he's living it. ❤ Thank you for using your talents..🙏for you and your town after all the devastation around you. When i heard Sulfur was struck I've been praying for y'all.
@danielstein83206 ай бұрын
Great. Just found you! Will look for more.
@StevenDavisPhoto6 ай бұрын
Thanks. What kind of paint do you use? I'm having issues with pooling and cracking of the paint in my carves.
@SmokeysCNCWoodworks6 ай бұрын
I use a airbrush now just a acrylic, on that sign for the cherry farm I honestly don’t remember, sorry
@angelgegege7 ай бұрын
Bravo!!!!!😀👋👋👋
@ΓιώργοςΣτουμπης-ξ9φ8 ай бұрын
what size are the bits you used?
@grantdavis52648 ай бұрын
Stop using plywood. It’s veneer, you’re going to have spots sanded thru.
@grantdavis52648 ай бұрын
Can you tell me what kind of paint you use in your airbrush and do you thin it any? I’m wanting to incorporate that into my work. Thanks
@pamnix8228 ай бұрын
😂
@kirkachenbach8 ай бұрын
what kind of paint do you use? and do you mix it with anything? Sometimes the paint bleeds and it's difficult to get rid of without sanding everything away. thanks
@aditecmedical46059 ай бұрын
which liquied is used in spray ?
@Building_Bluebird9 ай бұрын
Brian, this is a really nice build. How has it performed for you? I'm about to build a DIY 5'*10' table with NEMA motors. Appreciate your parts links, but done are now dead due to the age. But having the part names helps!
@roberte.35419 ай бұрын
I know this is old but I hope you look into your “controllers” I don’t think I’ve ever heard them called that
@jhouser65749 ай бұрын
What happens if one of the Y stepper motors or power supply quits. Will it warp the guides due to one motor still trying to move the arm
@keithparker938010 ай бұрын
Nice to see you back. Merry Christmas
@RobertGreiner-os7um10 ай бұрын
Why in the world wouldn’t you have your cnc machine make that cut out?
@jeanettelowe392310 ай бұрын
Where did you find such a nice thick piece of cedar?
@SmokeysCNCWoodworks10 ай бұрын
Actually locally sourced, I know a guy with a saw mill and has several types of wood he mills himself...Thanks for watching
@MRNBricks10 ай бұрын
Good to see you back! Hope your computer gets going soon.
@SmokeysCNCWoodworks10 ай бұрын
Well, lol, I got a new laptop and got the software installed and going.....wired the CNC machine back up, went to do a little test drive and the shop computer had the blue screen of death!!! I've sent it to a guy and expect it back and running before long....Thanks for watching!
@alwatts971310 ай бұрын
Nice. Been watching others paint signs to ideas on how to do some things. You're the first I've seen using a small airbrush and I think that's great. Lots of control and less overspray into other areas which means less sanding. Good job!
@davidhempton560810 ай бұрын
Great to see you back, good luck on the cnc.
@SmokeysCNCWoodworks10 ай бұрын
Thank ya! Hopefully it'll be all back together soon!!
@stefanr965310 ай бұрын
is his cnc precise..? looks like a frankenstein cnc made.