Hi Matthew, what are you brushing onto all the bolts and fixings and for what reason please?
@khanhlynguyen31977 күн бұрын
Incredible, you got it to work. I have an old one like this that's not chopping. Thanks for the great video.
@MatthewMoustache7 күн бұрын
@@khanhlynguyen3197 you're welcome 👊😁
@CarlWinter-oy8uf8 күн бұрын
Thankyou --really appreciate---will give this some positive attention !
@CarlWinter-oy8uf8 күн бұрын
Thankyou so much --made 5 Stanley 151 type 45 DEG --all failed --so will copy your blade shape 1
@CarlWinter-oy8uf9 күн бұрын
OK------Have you any dimensions of that Damascus blade ? length ? width ? appreciate !
@MatthewMoustache9 күн бұрын
@CarlWinter-oy8uf yes I'll check them tomorrow for you
@MatthewMoustache8 күн бұрын
@CarlWinter-oy8uf cutting edge is 46mm ,10mm wide and 3mm thick, overall length before bending sides was 106mm .
@CarlWinter-oy8uf9 күн бұрын
You have superb woodcraft machinery ---really nice equipment ---wish I had all that !
@MatthewMoustache9 күн бұрын
@CarlWinter-oy8uf thank you Carl, 95% off my stuff is second hand otherwise I would spend fortune 🤯
@CarlWinter-oy8uf9 күн бұрын
Looks like a 30 degree cutting edge
@CarlWinter-oy8uf9 күн бұрын
What are the dimensions of that Damascus blade --ie width & length. ?--what angle is the bevel cutting edge --on the steel ?
@ellanorevannin414713 күн бұрын
I have always wanted one of these!!! So amazing!
@salvadormendez986717 күн бұрын
PRIMERO UN BAÑO DE GASOLINA ESO PARA PODER DESARMAR BIEN TODO!!!!
@shitpostcu23 күн бұрын
Whatever this thing is, I'm crazy about it. I've loved it since I was little and I've always wanted to buy one.
@ianday38Ай бұрын
I've just picked up a Zyto lathe which is pretty much identical. Mine is in fairly reasonable working condition so I'm doing a bit of a rolling restoration. I've just replaced the original tool holder with a modern quick change type which has made a big improvement. I got one of the super cheap ones from eBay but it seems to work ok so far. If you do the same you'll need a 2.75" 3/8 whitworth bolt to replace the original stud Your video has been very useful, good work 👍
@ianday38Ай бұрын
Just looking again, it looks like your tool post has been modified with a piece of leadscrew which is probably much more rigid than the original 3/8 stud.
@simonbernal3934Ай бұрын
Hey Matthew do you also restore other framing machinery?
@MatthewMoustacheАй бұрын
@simonbernal3934 hi Simon, what kind of machine are we talking
@simonbernal3934Ай бұрын
great video` I have a Morso F that's been garage stored for five years. its a 39 year old machine which was in perfect condition but now even though covered.., has a fine rust layer on the exposed parts. This has given me the push to strip it and bring it back to the condition it deserves to be in and inspire me to use it. They are a masterpiece of design.
@logotrikesАй бұрын
Look at the amount of parts laid out. Amazing how many bits make up a mechanical device...
@6tesGirlАй бұрын
Wow!!
@Rebel9668Ай бұрын
I tried ordering from them a couple days ago using paypal and they still insisted I had to give them my email address before they would complete the transaction...and that ain't happening.
@MurlWatne-io2boАй бұрын
To many open spindles n gearing. Should be covered. Great restoration.
@MatthewMoustacheАй бұрын
Thanks, I have plans to make some nice cover 👍
@marvelman600Ай бұрын
Is this for display only?
@petermaunsell4575Ай бұрын
Beautiful work, does anyone know if the Toy Doctors rocking air pump is a real brand and if so, what is it?
@tonyandjackieholmes9546Ай бұрын
as below great work !
@zzruben2 ай бұрын
20:10 😂😂😂 yes, it's a game
@kieranwalsh80372 ай бұрын
I’ve bought some and like you only happy with 50% of them. Coat hooks and drawer pulls are good so are the brass animals. The t track will not fit my table saw.
@zoharflax63632 ай бұрын
Hi, what is the chemical used at 8:30 to darkn the metal pieces? Does that inhibit rust? Thanks!
@MatthewMoustache2 ай бұрын
It's called gun blue, it creates oxidation layer on metal and after oiling it's protected against rust
@JonasDieltiens2 ай бұрын
My man, you have such a nice workshop! :D And a nice collection of hand planes, I see. Great! One day I'll come and visit!
@MatthewMoustache2 ай бұрын
Cheers brother 👍 you are more than welcome in my workshop 😁👊
@99forizzi2 ай бұрын
This is a great video thank you very much. I have one of these in storage and was thinking about taking it apart for transport. I think I might go for it now. Great video and the Morso looks like new!
@richardsims18052 ай бұрын
Beautiful work to restore this old tool room lathe. Well done.
@michaelmarks69662 ай бұрын
Would you sell this box? Or make one for my son he is totally amazed how good this came out please let me know thank you
@JesperMakes2 ай бұрын
❤
@Jimmy-zo3up2 ай бұрын
Pretty cool dude
@MatthewMoustache2 ай бұрын
Thanks Aiden
@Jimmy-zo3up2 ай бұрын
@@MatthewMoustache it's Jimmy dude
@DelaneyGillilan-ts4og2 ай бұрын
What size rebar is that? #5?
@MatthewMoustache2 ай бұрын
I've used 20mm
@Fangs-jo4bq2 ай бұрын
What about the airbrush part on the side.
@grqergegsdf2 ай бұрын
Nice work. Im supprised that you seem to be the only one who make holdfast in such way on yt.
@MatthewMoustache2 ай бұрын
Thanks 👊 it's hard to be original these days 😅
@cliffdoes_stuff40122 ай бұрын
I've just caught up with all the messages in the group and saw you posted the link to this video there. Great video Matthew and the project came out beautifully. 🖖
@mskayla77473 ай бұрын
You, sir, are a master artiste. Excellent work.
@MatthewMoustache3 ай бұрын
Appreciate that Kayla 👍😁
@raystevens6873 ай бұрын
So if that lathe is from the 1930 how come you have plastic parts on the lathe.
@MatthewMoustache3 ай бұрын
That's because someone add them to this lathe, as they look handmade
@SRE8223 ай бұрын
Your videos are amazing! Don't Stop! 💪
@MatthewMoustache3 ай бұрын
Thank you very much Mike 👊 appreciate that 👍
@ianwalls49763 ай бұрын
Great to see you back and what an amazing job thankyou Matthew 👏
@MatthewMoustache3 ай бұрын
Thanks allot Ian 👊 appreciate that you are still here 🙏
@ianwalls49763 ай бұрын
@@MatthewMoustache always will be I love your content it's amazing
@DaveGDesigns3 ай бұрын
Love the front of the drawers mate that wood looked awesome and the walnut handles was a beautiful touch 👌🏻 are you going to makers at the weekend? If so I’ll see you then it’s been a while since we caught up brother👍🏻
@MatthewMoustache3 ай бұрын
Thanks allot brother 👊 unfortunately I need to do some work in my car soo all fund's go there, plus new workshop need to be done very soon
@kizlok733 ай бұрын
Witaj Mati długo cię nie było🤔. Super projekt bardzo mi się podoba szafka, pozdrowionka 😉
@MatthewMoustache3 ай бұрын
Hej Tomasz, no sporo sie dzialo ale jest ok. Dzięki i pozdrawiam 👊
@AlainStar3 ай бұрын
🙏👏👍💪
@A.J.Collins3 ай бұрын
It is great to see you again! I was just thinking the other day, "I wonder what Matthew is up to?" Now I know.
@MatthewMoustache3 ай бұрын
Thank you very much for staying with me 👊 there was some drama in my life over last 2 years but I'm back on track with big plans.
@A.J.Collins3 ай бұрын
@@MatthewMoustache I am sorry to hear that you were going through a rough patch. I pray for peace and success in your future plans.
@tahiragha5453 ай бұрын
after a long time you uploaded video why?
@MatthewMoustache3 ай бұрын
Last two years were very hard to me and that's a long story. But now let's make more content and more project's 👊
@Etrickster3 ай бұрын
Waow now i can repear my woodie toy
@thewoodjunki3 ай бұрын
Thanks for doing the video 👌
@enn1043 ай бұрын
Would you be able to use electrolysis to remove rust on the whole thing? I have the same chopper with some rust and don’t want to take it all apart.
@MatthewMoustache3 ай бұрын
I'm not sure, but you can use some rust remover by soaking rugs in and placed on rusted areas.
@doohandz3 ай бұрын
Something tells me that this is for "display only and if you handle it too much it aint gonna last" (But a very nice video! It looks very accurate to the one in the movie!)
@Bayzhit5103 ай бұрын
How much would u charge to make one for someone?
@MatthewMoustache3 ай бұрын
With today's price of materials it would be around 2k
@MizTereAlous3 ай бұрын
The only thing missing are the side panels on the chest, but thats alright.