OfStreams

Пікірлер

@xaviermontoya2554 2 күн бұрын

I bought the 1” brackets for my tent that I just got in from Prinsu. Made everything so much easier!

@DrNIx123 13 күн бұрын

Thanks. I checked a couple of websites and videos and it was all about fancy formulas. Now this is the most hands-on thing that makes sense and I will try this for my next sound reinforcement situation. Note that some subs have a cardoid system built-in, there's some by QSC, and the d&b y series subs do have it. However, the method in your video should work with any less-expensive subs, given you have 3 of them that are the same.

@OutofBreathOverlanding Ай бұрын

Great video good sir! Thank you for posting!

@ErnestAdehyee 2 ай бұрын

This is cool can be used for parallel compression

@nashgamalinda5383 2 ай бұрын

What does LTE means in awning?

@revelationevents2323 2 ай бұрын

Have you used the console for years without problems? I see people talking about problems with the screen freezing among other things, I’m thinking about buying a solo but I’m also considering the Yamaha dm7; what do you think?

@adedotunaderoju1267 3 ай бұрын

Nice! everything layed out and labeled

@theboston3386 3 ай бұрын

Why don’t you just get a bracket made for the tent and attach it to the tent.

@streams76 3 ай бұрын

Because I wanted the tent to be centered. Eventually, that is what I did.

@countryboy12gsp78 3 ай бұрын

Hey you could have attached it to your rooftop tent also!

@streams76 3 ай бұрын

Eventually, that’s what I did, but originally, I wanted the tent to be centered, given the weight.

@DbiPro 3 ай бұрын

Can you do a tutorial on how to setup an fix rerun and send and how to use it

@Coppersaguaro 3 ай бұрын

Just ordered one for my 4Runner.

@ismscsim 4 ай бұрын

Cool...great board?

@hanieltrisna 5 ай бұрын

I like it! Thank you!

@Davejansma 7 ай бұрын

Thank you for this video. I am looking at adding a 180 to my Xterra and have been wondering how it would mount. Now i know and what i need for ansmooth transition. Again thank you

@mastersKaaP 9 ай бұрын

Nice video. That's a good idea for solo fitment, apart from the hard to reach mounting brackets. Do you have a ballpark figure for the weight of your tent? And do you have any ideas on solo removal/dismount (without a hoist)? I'm having some corrosion issues with my roof rack, but now I have to dismount my tent before I can get the roof rack treated.

@streams76 8 ай бұрын

It weighs about 180 lbs. Since this video, I now store it in the barn with a harken hoist. If you have to take it off solo, depending on the vehicle, you can probably just slide it off the rear onto the ground, with a moving blanket or something to protect the car during the process. I'd recommend inviting a friend over to help.

@kevinriese2167 9 ай бұрын

Great video! Demonstrating that not all installations are as cut and dry as the manufacturer claims. I needed to use the spacers as well, however to avoid any twisting, I went with 3/8" thick starboard cut to full length and width of the mount. Using my router to router the adjustment slots in the starboard and then drilling through the 1×2" aluminum cross members. A little more fiddling around than what I would have liked but was required to clear my snorkel and allow for headroom. Watching your video first got me on the right track. Thanks, enjoy the awning and great outdoors. 🍻

@abcpatriot3276 9 ай бұрын

Did you need help installing the awning itself after mounting the brackets? If you didn't, how did you support the awning while installing the bolts from the mounting brackets to the back of the awning? I have a 2005 4Runner and I just got the awning but haven't had time yet for the install. Great helpful video. I don't have a roof top tent.

@streams76 7 ай бұрын

I was able to get it on there by myself, but an extra set of hands would definitely have made it easier.

@JulyOverland 11 ай бұрын

I doubt that roller is providing any assistance, as a matter of fact, I believe it's working against you when it comes to balancing your rtt, it almost fell to drivers side 5:15

@streams76 11 ай бұрын

It absolutely did provide assistance, and when you see the imbalance, that was due to the packing material getting jammed up. At any rate, I now use a hoist system in the barn.

@archieduckbutter1060 Жыл бұрын

The tent mounting feet from Prinsu make all the difference.

@streams76 Жыл бұрын

I saw those, but I wanted the tent as close to the roof as possible, avoiding as much wind drag as possible.

@rdenzil22 Жыл бұрын

The tent comes on a pallet with braces that hold it upright. After unboxing everything, I laid it down on a dolly to open and make sure everything was in order. I then tilted it back up on the pallet and tied it on using ratchet straps. Here’s where the cheating started… I used my tractor with pallet forks to lift it up to the top of my truck rack, got in the bed of the truck and removed the straps, then laid it down. Couldn’t have been easier!

@sleeks9939 Жыл бұрын

Where did you get those tail lights?

@flyingcat2054 Жыл бұрын

There’s no way I nor my husband could lift that up to the roof over that vehicle hatch! 😂 we r 62 yrs old and I have injuries in both hips!

@dksouthpawatx Жыл бұрын

super helpful video! I love seeing peoples' process, helps me determine what my own might be. I'd love to see more about your groups and parallel compression groups and matrices. That's my biggest stumbling block moving from smaller analog boards to something like the avantis

@jairoramos2584 Жыл бұрын

I have a similar set up, how has this help up ?

@codellipsis Жыл бұрын

Great job 💪… inspirational video 👌👋👊

@Mickysungproaudiong Жыл бұрын

Can you explain the wiring (rigs), and loops?

@andyking4701 Жыл бұрын

Thanks for the demo

@andyking4701 Жыл бұрын

Excellent!

@Snowboarding12345 Жыл бұрын

what's your tire/suspension setup? looks great!

@streams76 Жыл бұрын

Thanks! Bilstein 6112/5160 & K02 265/70/17

@KirkDickinson Жыл бұрын

I’m curious about this. I have 2 - KW 181s. My mixing board does not have the capability to delay the signal. I have two questions I guess. 1. What is the cheapest way to create a delay? For instance is there an affordable rack mount or simple in-line box that could be edit? 2. Wouldn’t keeping all the polarities the same and delaying the front firing speakers accomplish the same effect?

@user-vf7bl4uy2c Жыл бұрын

You need to move speakers then, or buy dbx pa system.

@KirkDickinson Жыл бұрын

@@user-vf7bl4uy2c can you please elaborate?

@user-vf7bl4uy2c Жыл бұрын

@@KirkDickinson if you move speakers farther you don’t need a delay i think. You can use dbx driverack pa 2 (or pa 1) to set delays. But i’m not sure it what’s you need.

@gevorgnazaryan8720 Жыл бұрын

You should have left the rest of the crossbars in to distribute the weight around and use the outer most crossbars to tighten the tent to

@streams76 Жыл бұрын

Good call - I ended up doing this after the fact.

@jei.phantom77 Жыл бұрын

Just flip it.

@tesfadennis9570 Жыл бұрын

How do you properly set up the sub group for drums, vocals, etc…?

@thada7070 Жыл бұрын

Thanks for the video! Impressed with your setup. You mentioned that your DCAs control the groups instead of the inputs (so that adjusting the DCAs doesn't throw off the parallel compression taking place at the group level). That approach appeals to me, but I'm stuck on something: How do make your DCA moves still affect FX levels with this set up? Assuming your FX sends are post-fader, then DCAs controlling inputs also control how much of those inputs are sent through FX, but DCAs controlling groups don't affect how much of the inputs go through FX. With DCAs controlling groups, how do you make it so that you don't keep hearing drums or vocals FX when you pull their group DCA fader is down? The only two ways I can think of are to either send the groups to the FX instead of sending the inputs, or have your DCAs also control the corresponding FX send (e.g. drums DCA includes drum groups and drum FX send(s)).

@streams76 Жыл бұрын

Typically, if I’m mixing with DCAs, any level adjustments I make are going to be minute, so effects aren’t affected significantly. If I need to make a more drastic adjustment, I will go straight to the channel fader or mute group.

@thada7070 Жыл бұрын

Makes sense. Thanks again!

@templeofthetree Жыл бұрын

Bravo!

@mjconrad51 2 жыл бұрын

Thank you

@sorayanawuttiwongphromkeer 2 жыл бұрын

What’s kind of cross bar did you install?

@streams76 2 жыл бұрын

It's a prinsu rack

@shaneb9323 2 жыл бұрын

lots of useful info! I'll subscribe but you should make a video of how you are routing your sub and LR matrices! Thanks.

@streams76 2 жыл бұрын

I'm just sending my Main LR to each matrix at unity, and then sending matrices to amps/boxes

@joshuakim5905 2 жыл бұрын

nice work getting it to fit. Do you have issues with it hitting the rear hatch when the hatch is up and the awning open?

@streams76 2 жыл бұрын

Not at all. If you do, just slide it forward.

@joshuakim5905 2 жыл бұрын

@@streams76 with awning open u can open the hatch with it hiring the awning?

@streams76 2 жыл бұрын

@@joshuakim5905 yes, that’s why I went with a 180 instead of a 270, so that the back area is open

@joshuakim5905 2 жыл бұрын

@@streams76 hm very interesting. I have a 4th gen like you and have the ovs 180. Currently at the height it is mounted I cannot open the awning all the way w the hatch open. The awning bits the hatch. I am going to put spacers and raise the awning higher which should then clear the hatch. The hatch will open just under the awning bar.

@joshuakim5905 2 жыл бұрын

looking at your build some more it looks like it is ok possibly bc your awning is pushed pretty far out from your roof. I put spacers to lift up the awning a little and it still hits the rear hatch. I am going to try to push it out some to see how that works out :)

@artysanmobile 2 жыл бұрын

It’s pretty ridiculous today for a console manufacturer to regard dynamic EQ and multiband Dynamics as ‘special processes’ only available in a limited quantity. DSP needs to be scaled up in all digital mixers to accommodate each in every path. It’s a marketing myth that this is a problem for them.

@artysanmobile 2 жыл бұрын

Though I have somehow never seen an Avantis in person, I am really impressed with the design as shown here. Clarity and ergonomics are a collective imperative for me in a digital console, exemplified perfectly by the SSL. Allen & Heath seem to have adhered strictly to these rules in the control layout and display appearance, as much as I can see just watching your layout demo. Many of the top makers (looking at you Yamaha!) have badly dropped the ball, choosing to reinvent the wheel and making an unintuitive mess instead. I was a major fan of Yamaha in the past but no more. I’ll be checking the Avantis closely with the hope of another option to specify. Great video, btw.

@streams76 2 жыл бұрын

Thanks! And I totally agree re: yamaha, etc. CL is a wildly capable platform, but I loathe the workflow. Avantis FTW!

@artysanmobile 2 жыл бұрын

That’s a very smart setup.

@asilva_media 2 жыл бұрын

odd. if you look in the metering where does it seem to come in?

@feral-bull 2 жыл бұрын

👍👍👍

@HT7980 2 жыл бұрын

Hey just a little advise. Remove your two cross bars , Install the mounting hardware to the tent on the ground and then get your tent up there. All you need to do then is place the screws in and you’re done

@streams76 2 жыл бұрын

Thanks, but that wouldn't work with the roller setup. With that said, I now have a hoist system, and that's what I do now...video coming soon... :)

@ashleywilliams9890 2 жыл бұрын

@@streams76 May I ask which hoist system you use?

@streams76 2 жыл бұрын

@@ashleywilliams9890 Harken hoist, works great.

@azrahostetler571 Жыл бұрын

@@streams76which kind? The kind for truck tops?

@streams76 11 ай бұрын

@@azrahostetler571 It’s marketed towards jeep hard tops, but it’s universal, for anything that you can wrap straps around, it will work.