Installation & tweaking of the Overland Vehicle Systems 180 degree awning on a 2008 4Runner.
Пікірлер: 20
@Coppersaguaro4 ай бұрын
Just ordered one for my 4Runner.
@kevinriese21679 ай бұрын
Great video! Demonstrating that not all installations are as cut and dry as the manufacturer claims. I needed to use the spacers as well, however to avoid any twisting, I went with 3/8" thick starboard cut to full length and width of the mount. Using my router to router the adjustment slots in the starboard and then drilling through the 1×2" aluminum cross members. A little more fiddling around than what I would have liked but was required to clear my snorkel and allow for headroom. Watching your video first got me on the right track. Thanks, enjoy the awning and great outdoors. 🍻
@Davejansma8 ай бұрын
Thank you for this video. I am looking at adding a 180 to my Xterra and have been wondering how it would mount. Now i know and what i need for ansmooth transition. Again thank you
@countryboy12gsp783 ай бұрын
Hey you could have attached it to your rooftop tent also!
@streams763 ай бұрын
Eventually, that’s what I did, but originally, I wanted the tent to be centered, given the weight.
@abcpatriot327610 ай бұрын
Did you need help installing the awning itself after mounting the brackets? If you didn't, how did you support the awning while installing the bolts from the mounting brackets to the back of the awning? I have a 2005 4Runner and I just got the awning but haven't had time yet for the install. Great helpful video. I don't have a roof top tent.
@streams768 ай бұрын
I was able to get it on there by myself, but an extra set of hands would definitely have made it easier.
@nashgamalinda53832 ай бұрын
What does LTE means in awning?
@Snowboarding12345 Жыл бұрын
what's your tire/suspension setup? looks great!
@streams76 Жыл бұрын
Thanks! Bilstein 6112/5160 & K02 265/70/17
@joshuakim59052 жыл бұрын
nice work getting it to fit. Do you have issues with it hitting the rear hatch when the hatch is up and the awning open?
@streams762 жыл бұрын
Not at all. If you do, just slide it forward.
@joshuakim59052 жыл бұрын
@@streams76 with awning open u can open the hatch with it hiring the awning?
@streams762 жыл бұрын
@@joshuakim5905 yes, that’s why I went with a 180 instead of a 270, so that the back area is open
@joshuakim59052 жыл бұрын
@@streams76 hm very interesting. I have a 4th gen like you and have the ovs 180. Currently at the height it is mounted I cannot open the awning all the way w the hatch open. The awning bits the hatch. I am going to put spacers and raise the awning higher which should then clear the hatch. The hatch will open just under the awning bar.
@joshuakim59052 жыл бұрын
looking at your build some more it looks like it is ok possibly bc your awning is pushed pretty far out from your roof. I put spacers to lift up the awning a little and it still hits the rear hatch. I am going to try to push it out some to see how that works out :)
@theboston33863 ай бұрын
Why don’t you just get a bracket made for the tent and attach it to the tent.
@streams763 ай бұрын
Because I wanted the tent to be centered. Eventually, that is what I did.