Ай бұрын
Жыл бұрын
Пікірлер
@omoab 2 күн бұрын
A great peace of art work there Tim your mum will be made up with that. One other thing were is Dave?
@rbmcstore2497 10 сағат бұрын
Dave I still need to make, I keep forgetting. I'll be best taking some foam to the shop and make it there 👍 she liked it BTW.
@psicodelicoworld 3 күн бұрын
Great video
@kevscranes 11 күн бұрын
Hey lad can you come to Perth Western Australia and get my 1988 girl running that sweet. Cheers Kev.
@chrisvonahnen3578 18 күн бұрын
Don't start an engine with oil older than 1 year. Engine oil will degrade just sitting on the shelf in the container. Several years oil engine oil is almost certainly completely dead & will damage your engine; it´s like skipping several oil changes. Cold engine start always cause wear on the engine, with old dead oil it's really bad wear on the engine.
@mikepeebles 18 күн бұрын
Great bike and love that color! You did an outstanding job on restoring the bike. I was wondering why you didn’t swap out the rear shock when you had the rear wheel off and easy access to it.
@rbmcstore2497 18 күн бұрын
It's all about customers budget, when I spike to him I recommended replacing the shock swingarm (very corroded) and linkage bearings however budget wouldn't allow that. He wanted to use it and get used to it, it's actually due back in at some point soon to do these jobs 👍
@Ian_Burt 23 күн бұрын
W T Actual F? Life apparently has no meaning to this "mechanic".
@rbmcstore2497 23 күн бұрын
I think the owner did it himself, it has a brand new caliper, sliders & pads on now. Scary!
@omoab Ай бұрын
Good to see the progress with the XLR coming along, nicely.
@TimZZR2 Ай бұрын
Very artistic 👌
@gareths483 Ай бұрын
You could try a hot wire to cut the foam. Save you a lot of time.❤
@rbmcstore2497 Ай бұрын
I tried that on a scrap of foam and it did the come out well, I may just need more practice I'm unsure, have you used shadowfoam?
@gareths483 Ай бұрын
@rbmcstore2497 no not used on that type before. I thought it might be faster for you. Sorry.
@rbmcstore2497 Ай бұрын
@@gareths483 That's OK, always worth trying I say. Have you seen my other shadowfoam projects? Also have a full video on this project too
@MinifiguresWorld-ew1cs Ай бұрын
See you all there next year
@EUKBIKER Ай бұрын
Exclusive perks... Annoy tim... TIM TIM TIM TIM nah only joking...
@rbmcstore2497 Ай бұрын
@@EUKBIKER That exclusive perk is exclusively yours 😂
@qtocarrose5992 Ай бұрын
Watched and enjoyed, thanks lad !
@ahmetcagrkaraca2465 Ай бұрын
Hello, I own a Mutt Mushman 250, and unfortunately, my speedometer has stopped working. Since there’s no service available in my city, I bought a universal replacement. However, I couldn’t find any information about the wiring or installation process. If you could provide any guidance or advice, I’d really appreciate it. Thank you in advance!
@rbmcstore2497 Ай бұрын
Hi if you bought a universal one then it would all need wiring up which would be a tricky job, you would need to find out what each individual wire does. If you want the original speedometer we may be able to get them for you if you email us direct. Thanks.
@poaloplays Ай бұрын
The rabbit will be a great addition to the team
@aaronsiame7174 Ай бұрын
Thanks so much you a good mechanic please keep on teaching us.
@rbmcstore2497 Ай бұрын
Thanks I plan on doing 🙂 got a few videos lined up (no how to vids at the moment but should hopefully get another out over winter)
@MinifiguresWorld-ew1cs Ай бұрын
Wow that can not have been easy
@EUKBIKER Ай бұрын
Looks good does that Tim. If i did it id give up half way and it would be a squiggly mess 😂😂
@rbmcstore2497 Ай бұрын
I almost did a few times 🤣 had to have a 10min break half way through it
@TimZZR2 Ай бұрын
Amazing! 👏
@DuffHandle Ай бұрын
Smart old GPZ there, eh? 😁👍
@rbmcstore2497 Ай бұрын
They were fantastic bikes! Very reliable and for little engines they pulled well. Characterful! 👍
@DuffHandle Ай бұрын
Nice one. Thank you. 👍
@rbmcstore2497 Ай бұрын
@@DuffHandle You're welcome 👍
@DuffHandle Ай бұрын
Smart work. 👍
@rbmcstore2497 Ай бұрын
Thanks 👍 we do our best to help people gain the confidence to do it themselves
@EUKBIKER Ай бұрын
Paul does clean up a bike well 😂😂
@EUKBIKER Ай бұрын
Also subbed to the membership 👍
@rbmcstore2497 Ай бұрын
He does mate, does a cracking job as always! And i noticed thanks a lot buddy :) I'll have to crack on with making member only vids now
@EUKBIKER Ай бұрын
@@rbmcstore2497 🤣🤣 no rush... Just figured id support more than just popping in and talking your head off 🤣🤣
@jenmasey2656 2 ай бұрын
Love this video! Thank you! What parts would I need for a Lexmoto Tempest please? It’s missing from your website (which looks awesome btw!)
@rbmcstore2497 2 ай бұрын
Hi if you email us directly we can source a full service kit for you. Our email is [email protected] thanks. 👍 and thanks for watching 😊
@EUKBIKER 2 ай бұрын
Bet i could spit flames if you gave me a chilli
@EUKBIKER 2 ай бұрын
Nice to see @omoab (paul) doing the assistance for the video... I can spot that boiler suit anywhere 😂😂
@buster8847 2 ай бұрын
Take it to triumph and they want £800 for a service 😂.
@rbmcstore2497 2 ай бұрын
Well this fella used to use Triumph, i nearly fell over when he said what they were charging, not only that not much was done, oil filter overtight, loads of threadlock used on the sump plug?? cheap semi synth oil, air filter wasn't replaced (very dirty) they re-fitted the tank and lost the rubber grommet etc... There was even a fairing bolt missing. Must have been the 'apprentice' 🤣
@EUKBIKER 2 ай бұрын
I think you should put a torch in the airbox 😂😂
@rbmcstore2497 2 ай бұрын
🤣
@EUKBIKER 2 ай бұрын
DJI in the Ryobi box 😂😂... I mean if it works it works.
@rbmcstore2497 2 ай бұрын
Well I got a free box from Ryobi so though why not it will fit well 👍
@EUKBIKER 2 ай бұрын
@@rbmcstore2497 looks good just seems random lol. You putting that on the Triumph?
@rbmcstore2497 2 ай бұрын
@@EUKBIKER No, its to carry around with me when out and about recording, but i am going to make another shadowfoam insert for my triumph to put a few of them items in so when im going travelling all my stuff is there ready and secure 👍
@EUKBIKER 2 ай бұрын
@@rbmcstore2497 ive done a arts and craft thing today... Stitched my work pants pocket to pants... Realised i also stitched it to my leg 🤣🤣, got it off and restitched it without getting it stuck to leg.
@schnitzjr 2 ай бұрын
Um, no.
@emilycristina8629 2 ай бұрын
whats the gasket for this, cant seem to find it anywhere.
@rbmcstore2497 2 ай бұрын
Is it the left side engine gasket that i replaced you want?
@emilycristina8629 2 ай бұрын
@@rbmcstore2497 thats the one!
@emilycristina8629 2 ай бұрын
@@rbmcstore2497 thats the one!
@emilycristina8629 2 ай бұрын
@@rbmcstore2497 that's the one!
@EUKBIKER 2 ай бұрын
High torque engine requires a massive nut lol.
@rbmcstore2497 2 ай бұрын
Yep and massive nuts require high torque 😅
@EUKBIKER 2 ай бұрын
@@rbmcstore2497 massive torque makes torque wheelies which require massive nuts and new clean undies...
@jameseastwood4984 2 ай бұрын
Is this the Gaydon museum's 'ware house collection' of vehicles that aren't on display to the general public?
@rbmcstore2497 2 ай бұрын
Let me know if you have seen a bigger nut on a bike (people not included 😅)
@Pathfinderxr 2 ай бұрын
I once stripped my scooter down to this level in my living room over about a week to then learn that sometimes, even when a battery is knackered, it still shows 12.5v. New battery all back together and it worked. Strip down for nothing 😊
@omoab 3 ай бұрын
I hoped you got the lottery numbers off him 😂
@wombat1238marsupial 3 ай бұрын
Nice to see a customer getting value for money out of their tyres😂
@rbmcstore2497 3 ай бұрын
Certainly did 😅
@86FJRider 3 ай бұрын
Great video! I have one of these bikes sitting for 15 years where is best place to order parts and maintenance manual?
@rbmcstore2497 2 ай бұрын
What parts are you after?
@86FJRider 2 ай бұрын
@@rbmcstore2497 I don’t NEED anything yet but as I get the bike running I might. I would be interested in a rear luggage rack if somebody had a reasonable one.
@pirminkogleck4056 3 ай бұрын
The Engine of the XX 1100 is a Masterpiece. Allthough a Heavy Bike,this Thing Rips
@rbmcstore2497 3 ай бұрын
@@pirminkogleck4056 Aye its a great bike, very smooth and plenty of torque.
@pirminkogleck4056 3 ай бұрын
@@rbmcstore2497 haha,yes,man i Loved to Ride this Thing. We Had the 2001 xx1100 CBR
@D.P.9 3 ай бұрын
Are these genuine heads,;;
@rbmcstore2497 3 ай бұрын
Yes standard exhaust system, if I remember rightly I think they changed in later models so you can access the oil filter without removing it. I suppose the only good thing in this case is the exhaust system will never seize in place as its removed every service, it came apart quite easily and assembled easily. It just means more time and a set of exhaust gaskets every service.
@briankidd44 3 ай бұрын
Nice vid, i proper enjoyed it. Back in the 80s that was called The Mad Axeman. Our bike club used to go every year. Its a lot bigger now. Back then there was about 150 bikers attend, now its massive. Brought back a lot of memories, so thanks for vid.
@rbmcstore2497 3 ай бұрын
@@briankidd44 You're welcome, thanks for watching, gonna do a few more rally videos next year. I didn't know it was called that then, I started going about 15yrs ago, it is slightly lower numbers since but that's because most rally goers are older now. They are trying to attract younger people, unfortunately that means some of the newer music is......not to my taste but still play some belters too 👌
@thingsandstuff50 3 ай бұрын
That's one for the diary, cheers 😀
@rbmcstore2497 3 ай бұрын
Aye highly recommended, I didn't mention the axe throwing and the rides in this, I'll be doing some more rally videos next Yr 👌
@TimZZR2 3 ай бұрын
Ace! 👌
@ShadowFoam 3 ай бұрын
Great project as always but I must admit that Ryobi wall behind you is still a work of beauty ❤
@rbmcstore2497 3 ай бұрын
@@ShadowFoam Thank you 😊 yes it's been extremely handy. Both walls are, still gotta do my other project yet, using them offcuts you guys gave us. Dying to get on to that, should be something different 👌 Your channel has come on leaps and bounds, enjoy watching your videos.
@MinifiguresWorld-ew1cs 16 күн бұрын
Im torn between the harry potter one and the Ryobi wall, he has added more items to both walls since the videos👍
@shaunhardie6077 3 ай бұрын
That's a tidy job done there fella, 👍😎.
@rbmcstore2497 3 ай бұрын
Thanks 👍 got another shadowfoam project lined up when I can get around to it
@EUKBIKER 3 ай бұрын
Looks fun, i think i need to try going to a event like that one day. How did your front mudguard footage turn out?
@rbmcstore2497 3 ай бұрын
It came out OK but was a bit shakey, I turned hypersmooth off as it was too smooth, I need to put it back on but on a lower setting
@EUKBIKER 3 ай бұрын
@@rbmcstore2497 i think youtube has a smoothening feature for shaky footage
@shootingGBS 3 ай бұрын
Cracking video! So, these Bullit any good? We know they're made of Chinesium, but I've been offered one very cheap, tempted now if you can supply parts!
@rbmcstore2497 3 ай бұрын
@@shootingGBS They are OK it depends on how it's been maintained and kept. Some of the models have a few electrical gremlins but other than that just regular maintenance and it should serve you well 👍
@EUKBIKER 3 ай бұрын
Looks like a good time... Normal stuff happening in Darwen, just seen 9 police cars fly by both directions lol
@TimZZR2 3 ай бұрын
Typical darren
@EUKBIKER 3 ай бұрын
@@TimZZR2 darren, land of the uh, erm... Eeehhh.... Pubs... Lots of pubs...
@jamesdewer 4 ай бұрын
I cannot help but think of the many maintenance advantages of air cooled engines, space is tighter for certain but not having to deal with a cooling system and the relief, every oil change of not finding coolant in the crankcase! I do all my own wrenching so small things like V-twin compared to I-4 are foremost when choosing a new to me machine. You're a great specialist and mechanically savvy as you point out the necessity of deadlines and having to work smart as well as working hard. No shortcuts, but in my area a good specialist is impossible to hire. It's fair to say even absolute novices that gun-deck every step as well as botch a customers repair are in demand. It's fair to say a man with a reputation and, to be candid, fortitude, to post their work is indeed worth a premium.
@leev1498 4 ай бұрын
Love these tutorials for Mutt Motorbikes. So invaluable. Please do more. Thanks.
@ArandomNutter 4 ай бұрын
What a lovely video tutorial, any chance you would be able to do one on the rear shock for a Mut Razorback?
@rbmcstore2497 4 ай бұрын
Sorry we don't rebuild rear Shocks normally, just replace them, I can only really do these jobs as and when the specific jobs come in and I have the time. Unfortunately time is very limited as we are a very busy workshop. We hope to spend more time on them in the future as our Patrons increase and youtube ads make more money. Until then we have to prioritise our income 👍 Thanks for watching.