Just watched this, my 2010 feeds the paper through but stops before final delivery and I have to pull the sheet out. Will what you did in this video solved the problem

Nice printer.

Thank you, thank you, thank you! I have managed to fix my printer! SO PLEASED and SO proud! Couldn't have done it without your help!!

Hello, my printer's (Samsung ML-2010) pickup roller is rolling only one time. What can I do in this situation?

Recommended

Thank you for showing how to remove the roller! Challenging to say the least.

Question: my carousel turns w/o using a straw or other impliment - what does that mean? In other words my carousel does not lock? What could be wrong?

A cotton bud with the cotton pulled off one end, works too

Thanks a lot, I had a problem with position of black catridge so I coulnd't put it, for others: you can use pen refill to release the lock.

Thank you for this. Helped me fix my Samsung ML 2510

Hi there, do you know how to rotate the axis? it did rotate itself :(

you are a BUTCHER. your tools should be taken away. what ever happened to a decent light source BEFORE you start work. spare us all future attempts at repairs.

couldn't budge it

*terrific price, quality and performanceσσ>**share4.photo/HpLaserPrint?҂** HP is the gold standard for laserjet printers. small and fast. black/white printer.*

This video is much better kzbin.info/www/bejne/ZoaYhnZrjbprl80&t=

Had a toner cartridge (Old old old stock) barf up a ton of toner into the printer and the paper coming out is one giant melted bunch of blech. I've got it taken apart (per this video) but... Not sure what to do other then remove the fuser and see what sort of abomination thats become.

Hable en español wey

What did you use to spray the rubber?

same idea for Samsung ML-2510..It was little bit harder than this one to take the roller out and put back in..put after rotating the rubber roller..every thing works again....thanks a lot for you video

The video would be very informative, if you pointed to the parts you named. while aiming a light at them. I couldn't guess what part you meant by the "clip" in order to "push down" on. I spent hours guessing and trying in vain. I am sorry to say that the video did not help.

Turning the power off during cycling frakked up my printer beyond anything I can do to fix it. Now when I (try to) turn it on, the Online/Error LED goes red and nothing happens. Holding the Cancel button on startup causes the Online/Error and Toner Save LEDs to alternately blink rapidly. I tried repositioning the paper grabber roller (eventually by dismantling the drive gears on the side of the unit), but that did not help. I downloaded the Service Manual, but nothing in it remotely addresses the problem I'm having.

Thanks man! Saved my life.

Recommend the use a 240mm long screwdriver rather than the short one shown. This allows the roller to be prised off the clip from outside the printer. I couldn't do anything with my hand inside the printer. Thanks for the assistance.

Thank you so much for this video. I was able to get my carousel un-jammed successfully!!!

It was very helpfull. Thanks from Spain.

i did this thing, but now the printer won't work at all , the red light (/Error) is on all the time. when I power it on, the green light comes on for a fraction of a second, I hear a motor sound, then sound stops and red comes on ... anything to check?

what's going on when the printer wants to feed one and one-half pages at a time and then jams when the first page is only about three-fourths of the way out?

thanks it helps a lot for me!!

Thanks

Dave, you have serviced this printer that I have inherited from my company and was wondering if you'd like to make an offer on it. It is an HP4200DTN.

On top of the right carousel (you have to remove the top cover) is a small relay. This relay is what aligns the carousel's right big gear. The relay can be taken apart by removing the spring and lever on top of the relay. Underneath the lever is a little spunge for noise damping. This spunge over the years turns into chewing gum and makes the relay stick, hence the carousel stops at the wrong place. With some alcohol remove the sticky spunge residue on the lever and relay. I just stuck a new piece of double sided tape on the lever (where the old spungy was) and left the tape (siliconated strip on the other side) on....you don't want the relay to stick together (just on the one side..the lever or the relay body). This works as a damper. Install the relay back and follow the video to re align your carousel. If you dont repair the relay your carousel will just lose its alignment again. You can also stick a piece of selotape on the other sticky side of your double sided tape. Hope this is clear.

Great tutorial! Thanks for the tip.

Excellent tip. Clear instructions, very easy to do, works a treat - thanks.

Thanks, it worked. My ML2010 printing again like a charm

You are a beautiful, beautiful man! I used the inside of a pen where the ink is stored as I didn't have the straw.

I pulled a number of sheets of paper back out when the printer jammed. There was a lot of resistance. Now the printer will not pull paper in. It just makes some noise then stops. I know I reversed the gears when I pulled the paper out. Is there anything I can do to fix it? Samsung 2510

I don't just bow, I kneel to your experience ! Many thanks, Sir !

Yes I was sure that what happened to Mr Tucats would happen to me, but a gentle wipe of the rolller has dobne the trick, thanks

Dude you saved me hours, thank you. My printer went crazy after I installed a cheap toner from ebay. the carousel jammed with the bad toner locked at the back. Well done for a great video.

Thanks for the video! Unfortunately I did not manage removing the pick-up roller out of the printer which is why I learned an easier way to fix this problem myself. In my printer cleaning the pick-up roller without removing it worked aswell: First of all, I unloaded paper and toner cartridge, as you did, then took some cloth and added some slug of benzine on it. Using the wet cloth I wiped it from left to right on the pick-up roller (or vice versa) to clean it from dust and any other substances. Finally I put the toner and paper in place. It now works! Yeah! German version: Ich habe es leider nicht geschafft die Gummirolle aus dem Samsung ML 2010 PR zu entfernen. Wie sich später herausstellen sollte, war dies in meinem Fall auch nicht notwendig. Ich habe einen einfacheren Weg herausgefunden, das Problem zu lösen. Ich habe die Gummirolle mit Waschbenzin gesäubert, ohne sie zu entfernen: Zuerst habe ich Papier und Toner entfernt, wie im Video zu sehen. Dann habe ich einen Lappen genommen und einen Schluck Waschbenzin genommen (das säubert einfach Vieles! :-). Mithilfe des somit "befeuchteten" Lappen habe ich die Gummirolle im Gerät gesäubert, indem die Rolle mit dem Lappen von links nach rechts (oder umgekehrt) saubergewischt habe. Ihr solltet auf jeden Fall aufgrund der waagerechten Rillen nur horizontal wischen, da man sonst wahrscheinlich nicht allen Staub entfernen kann. Wischt nur in eine Richtung, da der Staub sonst auf der klebrigen Gummirolle haften bleibt und ihr die Prozedur viel früher wiederholen dürft. Schließlich habe ich den Toner und das Papier wieder in den Drucker gesteckt und freue mich riesig, dass er wieder einwandfrei funktioniert :-) Juchuuu!

You rock! Thanks.

Thanks, really easy and works like a charm

Got it out, rotated & cleaned rubber. Now I can't get it back in. No amount of pressure seems to work. As a matter of fact, I think I've bent the square-ish "axle" that the assembly is on. Thanks!

Repair, better than replace. Thx.

Here is a neat trick: Turn on the printer. Press and hold the Cancel button until the Toner Save lamp lights up. Release the button, and a test page will print. Turn off the printer just when the roller has turned one half turn. When you get your timing right, the roller will stop in just the right position. Now press the release tabs and apply pressure on the bottom half of the roller. It's not difficult at all!

Your words were more descriptive than the video and I was able to get the roller out and cleaned. Thanks much!

Excellent video. I'm having the classic paper accordion problem now after having the power supply replaced (error code 5x).. I bought my HP 4M new in 1991...never serviced until now but only 9,000 pages on it. I bought a parallel to BLUETOOTH adapter... works flawlessly with WIN 2K ---> Win 8.1 PRO. HP 4M is now a wireless printer. Used stock drivers from Microsoft. Maxed out the memory and put in a network card.

Ok....Nice Video, The printer came apart just like you said, I've got everything ready to service and or repair. What now? where is part 2 or 3...I've got a desk full of printer parts and no further instructions of what to do now. Please don't leave me hanging

TY so much, I just bought a new toner and even before needing it I started to have paper jam every time I wanted to print. Since then it works like a charm.

Thanks for your advice, there is a better video for getting the thing out BUT your idea of reversing the roller saved me money and downtime,, thanks you are a life saver