@beamedbyarctic mmm...I would guess if the fan is low enough it may still work?

@ damn you still replying 2 years later

@@beamedbyarctic I try to answer questions anytime someone has one.

@@bimmyfrizzo3988 are you able to calibrate your mouse with the reticle? Using the calibration process or will your mouse only move the reticle up and down during that process too?

I can't get to the top left X. The target is only in the middle of the screen and it can only go up and down. But I completely followed everything you gave in this video before I got to the calibration option.

@bimmyfrizzo3988 mmmm....ok, well let's try a little trouble shooting 1st. Can you use the key board arrows and move the reticle in both directions? If so then it is something wrong with your mouse setting which we can try to figure out.

​@@Vincent_Serpico that's ok. I still have until dawn rush of blood on psvr which is the closest I'll have to carnevil. But thanks anyway

@@kessu83 you probably could, but i wanted to try and keep it as close to the original as possible.

@@b4wf I made this one.

@noelhabets7800 if you take a look at the description it should give you the info you need. Have fun building it and I'd love to see your end result.

@forgetmenot723 Thank you so much and yes one of my favorites as well. I always wanted one and could never find it, so figured I'd have to make my own.

@@Pocket_Junk You will like it, 1st introduction to why AI is a bad idea!...lol

@portablebox6517 when you say plays at random, do you mean as you're playing the game? That the coin noise just randomly happens? Or is something setting it off when you hit a button? One issue may be if the coin button somehow was reset to a key that is also used for something else in the game. For example if it was added accidentally to the fire button? Go into your tab settings and see if it has been assigned to another key as well as the normal one that it is supposed to be. It should be attached to the number 5. Let me know if this helps.

@gregc.9035 Your very welcome, I experienced the same frustration as you, so I wanted to make sure others didn't have to have it so hard. Enjoy!

@@Vincent_Serpico Yeah I don't normally make videos, but if i'd have figured this one out I might've made my first one for the very same reason you did. There's something I wanted to let you know about too. On the mame version I've been using..I was having a strange problem using the mouse as a lightgun on Crypt Killer. The crosshairs would follow the mouse perfectly around the screen, but when you moved it to the left of center and pressed fire..it would fire the shot an equal distance to the RIGHT of center. The effect was the same when I moved the mouse to the right. Up and down didn't have that problem though. What was pushing the dagger even deeper for me was that I wasn't able to use my mouse buttons to fire with. Well I decided to try the game out using this mame version, and I now have 2 games that are running as smooth as can be! You never know just how far an idea might branch out for the next guy when you pass along helpful advice. I hope you have the best of luck in everything you do man.

@gregc.9035 I have found that the game is finicky from system to system and sometimes takes tweaking by the user. Many of the questions I receive about something not working on one system works for others.

@@HarryMathisonso glad that my tutorial could help you out. I'd love to see a video clip of your display if you want to send it to my email. [email protected].

@jorgejulianvargashernandez5070 the sound can be a number of things from a slow processor to a setting set wrong. I can try to trouble shoot a bit. 1st what is your computer set up?

@@Vincent_Serpico my computer is a lenovo idepad 1i with 64 bits windows 11 and processor intel core i3 I have downloaded the game for Windows 11 from the page. The first time I played it, it sounded good. Then I wanted to play again and the problem started.i dowload the preconfigured versin with 2 mouse

@jorgejulianvargashernandez5070 So before I give you some solutions to try I will preamp with this: I have had other users that try to play this game on laptops tell me they have sound issues. Not sure if it has to do with the graphics card and sound cards in them or what. Some say all is well while others have issues. However, since you said that the game worked fine with the sound the 1st time I'm going to guess that a setting has been set wrong maybe by your laptop trying to match the best sound setting automatically for your system. So you can attack this in two ways. 1st check and see if your laptop changes it's sound settings to try and match the game or go into Mame Configure Menu and adjust the setting that works for your system. That may take a bit of trial and error. Generally the higher the number the more processing power that is needed which leads to lagging. Let me know if either of these work, if not I'll try to trouble shoot some more for you.

@@Vincent_Serpico What should I configure video or sound and what should I move or how much should I put?

@DejoyTV I have not tried it, but the theory seems sound. The Utrack should send the x and y axis to which ever it's connected to. If you try it let me know if it works. Thanks!

@@Vincent_Serpico Sweet, Alright will give it a shot! Just ordered a second rotary encoder will have the results by november 1st! 👊🏼

@Scoonertuna Thanks! One of my favorite Movies!

@@Vincent_Serpico Severly underrated...and the lore is so epic you could make this a franchise

@rride3238 14 inches, a lot of information can be found in the description if you need it. Have fun with your build!

@@Vincent_Serpico thank you :)

@waynesmith3427 Wayne, when I created this project I was not trying to break the bank so the projector i used was a small generic one. You can find them on ebay for around $40.00. The important part is to make sure you either have a usb or micro SD slot so you can loop your video. I suggest one that is 1080dpi, to answer your question about keystone, no, mine did not have that , so it's not really necessary. Here is a ebay number to a similar projector that I had used, but as I said any should work that is small enough. EBAY# 296646915785, hope this helps, let me know.

@allaboutthemagic9617 A 10 inch will work, but you will have to scale everything down a bit, and I'm not sure if your opening will be big enough for a full sized mannequin head. You may need to find something smaller.

@@junkduelist7171 Have you calibrated the reticle?

@scorpiux123 there is a sound adjustment in mame, you may need to adjust for your computer if it is not set correctly.

@@derricksosa6355 As far as the random shooting, did you calibrate your mouse with the game? I have not tried to use the wii controllers, I use a light gun with mine. Watch my video on calibrating your mouse as a light gun and see if that does not solve some of your issues.

@@Vincent_Serpico thanks managed to fix the random shooting problem, now I have lagging for some reason 😅 tried running mame on administrator and somehow made it worse...

@ShaggyMcstabby that would be awesome, let me know if I that happens!

@gingergeorge8887 I have to be honest and say I'm not sure, it was just a generic brand that fit my need. Ribbon style, self adhesive, sound reactive lights trips, Amazon has a countless selection and most will indicate their safety about usage and whether there is a risk of fire.

@@davidcallahan2832 So true David!!!

@@Vincent_Serpico I also want to say that your Madame Leota is the best recreation I have seen. Thank you for caring enough about this project to provide all the links that might be helpful. This video is definitely a keeper.

@scaryhymen What type of computer/processor are you using? What operating system are you using Windows 10 or 11? Usually when someone tells me it's running slow it's because of one of these issues.

@@Vincent_Serpico it’s a sager np9150 lab top computer made in 2012 running windows 10 PROCESSOR INTEL CORE 17-38200M GRAPHICS NVIDIA GTX 680M 4GB DISPLAY 15.6" LED 1080P W/ 95% COLOR MEMORY 16GB DDR3-1600MHZ HARD DRIVE CRUCIAL M4 512GB SSD

@scaryhymen Unfortunately, your computer is a bit older, I looked up the specs and if I'm right your processor only runs at 2.7ghz which may be the reason that the game plays, but is slow. This game although older does need some processor speed to run smoothly.

@@Vincent_Serpico thanks for telling me. The only bad thing is I have to find a another way to play Carnevil

@scaryhymen Sorry, wish I had a better answer for you

Sorry just seen in the comments. I’m using to driver 15x15

@waynesmith3427 Thank you sir, I would love to see the outcome of the mold you make for your wife and the end result of course. I will definitely keep an eye out for your post. Thank you for the compliment, it means a lot. Especially, coming from someone who worked for Disney.

@chattclouds8281 I have not tried it, but have not heard of anyone actually playing on their phone.

@VampDaVegan Thank you and yes I would have thought so too by now!

@Vincent_Serpico strange isn't it 🤔

Thank you, let me know if you have any questions as you make your Madame Leota.

Thank you, I've always been a fan of the movie and wanted to recreate the iconic prop!

I've actually never tried it in Launchbox, so unfortunately I don't have any suggestions, sorry.

The stuffing fiber does not fall down, but each panel I put up took between 5-7 bags, really it is going to depend on the size you are trying to cover.

Which games did you have in mind?

@@Vincent_Serpico like duck hunt on NES though Retroarch.

True, that's why I updated them and and made pre configured Mame in my updated video. I left this one up for anyone with older systems.

Glad its working for you now, not sure what you mean by "working with the post i pinned" was it the preconfigured file?

@@Vincent_Serpico oh Its not ponned... it's just the top comment. The one where it's explained how to change figure mouse by holding F2 at the first screen.

What is happening when you try to load it?

@Vincent_Serpico I got it to work one singular time. When I first moved ll the files in it launched. But then I exited out to configure the light gun to mouse because I was set on the keyboard. When I re went to launch the gane again, it says now EVERYTIME that I'm missing rom or chd image files for this machine. Even though I HAD IT RUNNING but now it will not. I've tried re-placing the folders l, re downloading them. Nothing works. I was so stoked when it loaded that first try right off the bat. But now it's just like a slap in the face. Haha

@@Vincent_Serpico I really would like to get it running on android even more as one comment lor said he did in a reply to your post stating you put everything all in one place.

@@-Airwalk1616- Ok, well let's do some troubleshooting first. Tell me the system you are currently using to try and run this(ie:windows 10,11,?) Also, just so I'm clear you are saying you re-downloaded my files and tried it again, but still got the same error?

@Vincent_Serpico yes, sme error. Windows11. But I was able to get it to run the first time by using a file downloaded from internet archive that had the carnevil_9.u32, sound102_.u95, and 486_carnevil.u96 files in it. I THINK I unzipped it and put it in a file named carnevil and left the chd files out in the roms folder on its own. Yes... files. I downloaded from a website. 2 chd files which were listed as 3, but only 2 worked. So I threw them both in the roms folder for the hell of it.

What operating system are you using?