ElectricPower

Пікірлер

@christianbowes7907 Ай бұрын

What motor are you using on your rad runner? I’ve heard the stock motor may have a speed limiter

@GaloSilvaCalva 4 ай бұрын

What do you can do whit shengmilo S600?

@Hubcaps219 4 ай бұрын

hey man! how fast does it drain the battery and will the wheel work with the stock controller? thanks!

@thehighriseconstructionob9679 4 ай бұрын

Amazing but i didnt understand its from 36 v to 72 volt change by what kind of mosfet & capacitor i need help with number & diagram please.

@rompstar 7 ай бұрын

what motor is this ?

@LeoPulfrey 7 ай бұрын

🔥

@kazhankazhanovych6895 8 ай бұрын

this big box is cool but when it's on bike you loosing your step-through advantage

@aptrm80 8 ай бұрын

Is this video showing that you can increase the voltage directly at the controller without the need for a boost converter🤔 or are you also using a higher voltage battery. I have a 52v 23ah battery, 52 v 25amp controller, duel 1200w motors, 3 modes with variable speed throttle. I was considering trying boost converters going directly to the motors but wasn't sure I that would allow variable speed or just a constant higher voltage from the boost converter. I really just want to increase the top speed a little .Great video thanks .😀

@WowWow-dn5lj 9 ай бұрын

I was waiting for the car to pull out 🥲

@alankokot7945 9 ай бұрын

Just a bunch of mumbling waste of time

@bethalpha 9 ай бұрын

cool lights

@wastedWizard509 10 ай бұрын

Which horn do you use?

@jaywiktorski2615 10 ай бұрын

Are you fuckin high or just stupid, do you like everybody else

@jaywiktorski2615 10 ай бұрын

Everything you just did you could have done through your through your your LCD screen

@tylerd947 11 ай бұрын

cool

@ManMan-b5y5c 11 ай бұрын

Didnt understand a thing

@dandesjardins2552 11 ай бұрын

Can you hook two lights on the front wired into the rear signal lights that came with the bike ,mine has break and signals at back trying to add to the front

@StanleyMidling 11 ай бұрын

also would this 12V converter work with a 52V ebike ?

@StanleyMidling 11 ай бұрын

ok, i have a real good question, are you running different wires or using the wires that came with the ebike ? as i see you have the 12V converter running from the batterie, which begs the question, how is your display working off of 12 V, instead of 48V ? or you would need to upgrade your diagram ok ?

@Zarkomr Жыл бұрын

this method is more secure regarding controller lifetime: kzbin.info/www/bejne/i6qaYWl_mtqal80

@SteveBeccue Жыл бұрын

i have a talaria xxx i have blinkers on the back just need to no how to hook them up i already got my new display put on but need help where to start thanks steve

@metou3072 Жыл бұрын

I have a 24 volt controller and i have 2 36v battery packs in series for 82v when fully charged and ive had no problems...went from 20mph to 42 mph

@markj6984 Жыл бұрын

i have very similar 35a black controller and it gets me to 57km an hour or so, (52km an hour = 32m/hr) ive seen higher on very slight inclines. Altho i cannot get the pedal assist to cooperate and is always full power so i switched back to the lcd8h. i did love the torque and speed with that controller.

@flolou8496 Жыл бұрын

I dropped in just to see if you got electrocuted

@DrGreenThumb135 Жыл бұрын

Does anyone know a link to a step down converter to bring 109.2v down to 84volts so I don't blow the 100v caps in my speed controller? I plan on using two 48v battery packs in series, if anyone can help it would be much appreciated! :)

@scientia.ex.deus. Жыл бұрын

You may encounter an issue wiring them in series as some BMS may safety cut out due to excessive voltage, the 13s BMS is expecting 54.6v max and pushing 109.2v through the second in series unit might trip it. It may be absolutely fine but just something to consider

@irisvhouwelingen Жыл бұрын

Amazing!! Very nice. How does it handle rain?

@dc5fallout Жыл бұрын

Did you die bro? where are you?

@sammyfuentes2561 Жыл бұрын

I just got me a rad runner 2 and I want to change the gears put 7 you think I can do it change it from 1 to 7

@philliplanfre347 Жыл бұрын

Great design and well made.

@mickyb.8014 Жыл бұрын

Surely its better to just do a shunt mod, or just get a better controller..?

@electricpower8130 Жыл бұрын

Better is to get a proper controller.

@mickyb.8014 Жыл бұрын

@@electricpower8130 yeah, with my soldering skills I darent attempt it anyway, just neatened up all the wiring on my build (built it yesterday, but wiring was annoying me) and wow this 1500w with a 52v battery on is a little flying machine, it's great fun and now it almost looks factory built... I'm well happy, but yeah I'm gunna get a sabvoton controller and a ukc1' display as my damn Voilamart kit didn't come with a display so I'm not sure how fast I'm going and I can't set it all up correctly, still shifts like pretty quick though..

@chrismartin6427 Жыл бұрын

What's the motor size by the speed i would hazard a guess at 1000w ?????

@MrYunglaos Жыл бұрын

Can you guide us to where we can look to find the motor? Website? What are the specs?

@electricpower8130 Жыл бұрын

Alibaba.com - MXUS 3000 Turbo

@Jahmall841 Жыл бұрын

Do you know the mosfet number you put into the 35a controller?

@electricpower8130 Жыл бұрын

I don’t remember. I took mosfets from original radrunner controller

@RemusSebastianMadMax17 Жыл бұрын

you broo, the motor it small, motor not run more, understand...

@RemusSebastianMadMax17 Жыл бұрын

my 55 km h ha ha ha, the motor it not power , ha ha ha, power on controler , but the motor it small...stupid

@PNEDesigns Жыл бұрын

Awesome build and great videos. Could you please link the brakes and front fork?

@somirhussain3230 Жыл бұрын

12 to 48 volt convert . Okay. But what happend the ampere

@ivan-j4l9x Жыл бұрын

I had a problem with my 12v brake light. I think the 48v to 12v converter must of had a capacitor that when I pressed and released the brake lever the brake light would remain on for 5 seconds

@CanOGoods Жыл бұрын

What kind of fender arm replacement did you get for this? I've been having trouble with mine connecting to a similar fork you have there. The way you have it set up is really nice

@josargor8179 Жыл бұрын

can you tell me the name of the hinge you used for this?

@electricpower8130 Жыл бұрын

I made it out of my Abus U-lock mount.

@josargor8179 Жыл бұрын

thjat looks amazing. you're giving me so many ideas! ever thought about putting hinges and a lock on your center console?

@colinwhite144 Жыл бұрын

That controller is the best one it's 35+1amp the mosfets are held with metal bars. You find the circuit is small in width that's to keep connroller cool most of controller the mosfets are screwed in at top against the side where heat greese is applied its normally white in colour to shunt that controller is the best one I've got the same and does work I blew 30mp fuse so I put 35amo fuse it's been fine never put 40to45to50amp as controller pop it would get to much current

@colinwhite144 Жыл бұрын

I've got the same controller all you had robdo is solder the shunt bars nip the bars together then solder across the top the length of bar. It might blow a fuse if it's 30 amp use 35to40amp great torque and speed. You doe it the hard way

@justinrushing9195 Жыл бұрын

I have a Radrunner also but I have a nice led headlight and turn singles but I only thing I want to upgrade and change out is the brake light, how would I go about doing that?

@natalinorapacchietta5902 Жыл бұрын

My e-bike ado spedd max 67 kmh battery 48/20amper controller 25a kt step app da 20amper 1200watr da 54.6 volt step app 72 volt spedd max 67.5 kmh e effettive kmh 55 kmh really my ado top top top

@trufinv Жыл бұрын

@ElectricPower did your 48v LCD8H display hold up at 70+ volts? I have the same display and I'm thinking of converting my battery to 60V so would need to run 67.2v through that display and I have no confirmation that it actually works. Thanks.

@sinduriy Жыл бұрын

hi man, did you convert to 60v?

@thehighriseconstructionob9679 4 ай бұрын

Im new to ebike but display staff use 5 v Insted of 60 v that 60 volt goes motor power but all other digital control voltage & LCD usually use 5 v ? Please let me know , I bought Chinese controller with label ripped off so it's hard to understand Wich brand so on but like to understand my 48 v controller with battery

@colinwhite144 Жыл бұрын

On controller for 1500wat and its the same on 2000 watt with out shunt bars with solder speed is 45mph the controller is 7amp 35+2amp I've done the shunt I biped bars together so I didn't use much solder speed is the same but the torgue is pretty good that's on the stand weather's crap so I can't try out the upgrade I did do one two weeks ago same controller blue a fuse 30amp so I've put 35amp not 40amp as you could blow controller

@valeriomarino691 Жыл бұрын

Name of the lock?

@electricpower8130 Жыл бұрын

Abus

@cynmate2729 Жыл бұрын

Hi, can you explain a little on how to make and install the Brake Switch please ? I got a little lost on that one. Many Thanks 👍

@InkDropFalls Жыл бұрын

You know you inspired me to buy and mod a Rad Runner 1 ....I did and i just finished it last month .....Just wanna say thanks for inspiring me to do it ....wicked bike ...

@mujtabamujeeb786 2 жыл бұрын

Not worth it. Id rather invest In a 60V wicked freedom bike for 2k. That gives you 38mph top speed

Ең жақсы KZbin

Пікірлер