HOW TO CONNECT HEADLIGHTS AN TURN SIGNALS ON BICYCLE

[@vickperry3940]

Wow, awesome! I just bought two vintage style ebikes and since day 1 I'm thinking about installing some turn signals and rear brake lights...Too bad I don't have the knowledge nor the tools to do this myself....Awesome job, good for you👏👏👌🤙

[@electricpower8130]

Thank you!

[@ДомашнийКот-б6ф]

@@electricpower8130 Hello! 10A fuse - why you put them between battery and 12v converter?

[@stan121midling5]

this is great, but is it possible to wire all these lights up to a external battery bank ?

[@PeterPedroA.Cintron-421Pc]

I subscribe to your channel already but I'm trying to watch all your videos you did a great job bro

[@michaelbruzzese]

hey man, thanks for the tips! It's much more clear now, I was wondering where you got those saddle bags? they look awesome

[@StanleyMidling]

also would this 12V converter work with a 52V ebike ?

[@dandesjardins2552]

Can you hook two lights on the front wired into the rear signal lights that came with the bike ,mine has break and signals at back trying to add to the front

[@roguepete73]

Hi...awesome video. Can you pls share if I want to connect one headlamp, 2 front turn signals, 2 rear turn signals, one horn to a switch and connect to a separate 12v powerbank.

[@SteveBeccue]

i have a talaria xxx i have blinkers on the back just need to no how to hook them up i already got my new display put on but need help where to start thanks steve

[@Altema22]

Very clean and good looking setup!

[@electricpower8130]

Thanks man ✊🏼

[@whalahiguy]

Amazing dude, I bought a little bluetooth kit with rechargeable signals but they aren't bright enough during the day and my e bike doesn't have a brake light. New project!

[@whalahiguy]

Do you know if I can add the brake light functionality if that wasn't already built in to my bike?

[@StanleyMidling]

ok, i have a real good question, are you running different wires or using the wires that came with the ebike ? as i see you have the 12V converter running from the batterie, which begs the question, how is your display working off of 12 V, instead of 48V ? or you would need to upgrade your diagram ok ?

[@TheTristan5150]

I was wondering about the Center tail light. does that connect to the converter

[@justinrushing9195]

I have a Radrunner also but I have a nice led headlight and turn singles but I only thing I want to upgrade and change out is the brake light, how would I go about doing that?

[@ivan-j4l9x]

I had a problem with my 12v brake light. I think the 48v to 12v converter must of had a capacitor that when I pressed and released the brake lever the brake light would remain on for 5 seconds

[@loglog271]

What did you use for the brake light switches?

[@radodanchev8600]

Its amazing. Thenk you for your work

[@davidbergewaytogo]

Are you providing power to all the lights from the stock headlight wire only? So to activate your whole circuit you power on the headlights on your bike keyoad and your sub-system comes to life? Thanks for your answer! Great stuff!

[@electricpower8130]

Thank you! I took all power straight from the battery through converter.

[@stan121midling5]

he had to wire the converter in between his battery and wires ok

[@jacobcloinger5853]

Could I add a 12v skull headlight to my ebike custom. It has 3 wires white, blue and green for both eyes?

[@parasmilegoddoors3319]

Hello what type of brackets did you use to hook up the lights can you send me a link where to buy brackets that can insert those lights to my bike with nuts and bolts to tighten it down do you have a website or a link

[@electricpower8130]

Everything is custom)

[@anthonyleistikow9485]

What kind of seat is that im looking for one like it

[@23allupinit]

Why is negative ground going to the switches? Isn't the switch just carrying the positive through? I also noticed 3 wires going to most of the lights but don't they only need 2 pos and neg? Sorry if this is a stupid question. I just built my first bike (stealth bomber) and just want to fully understand the wiring. Thanks in advance.

[@electricpower8130]

Of course, no problem! Usually on every motorcycle the ground going through the frame. But this is an electric bike. And for the safety reason I decided to make a negative wire line for each unit. It’s independent wiring solution. That’s it.

[@jacobcloinger5853]

What 2pin flasher do you use?

[@juandelacruz2989]

Can you make a video of how to connect to existing RR+ wiring? If you made any modifications on the existing cabling system of RR+, can you also share it as well? I have few questions; 1. If the converter 48/36V to 12V 10A 120W is not available, what is the other option? 2. Wire connectors - can you share also the link where we can order which you’ve used? 3. What sizes of wire you’ve used for the new wiring connectors? Thanks a lot. Great video...

[@electricpower8130]

Thank you! I sold the bike. 1. You can use only original parts. 2. I found it on Amazon. It’s plenty of them there. Just take the thinner ones.

[@PeterPedroA.Cintron-421Pc]

Yeah man I put turn signal some lunch too but mine's are different I got to share some photos of my bike with you we could share ideas I put motorcycle mirrors online it was easy to do

[@stan121midling5]

which mirrors did you use please ?

[@NicolaMs007]

Did you need to use motorcycle controls for the indicators? I have a ordinary MTB (mountain bike) which I would be converting to an eBike, with the BAFANG BBS system....what would I need on top of the conversion kit to add brake and indicators on the back of the rack and the front of the bike.?

[@electricpower8130]

You can use any controls you want. Just make sure they are for 12v. And don't forget to buy 48v to 12v step-down converter.

[@DanhRichardson]

If my ebike already came with a working headlight, do i still need the step-down converter? Or do you think the bike already has one?

[@stan121midling5]

@@DanhRichardson ok, there are headlights out here that are like 10V to like 80V, you just need to pay attn. to that ok and if you do not want to have to have a step down, then buy a head light that will except power from 10V to like 80V ok, i have found lights that will do that and also take like 12V to 24V, those needs a step down for it to work off the power of your Ebike ok, hehe

[@stan121midling5]

@@DanhRichardson but also with lights that only will take power that is 12V to 24V, you can always just hook up to a external 12V battery bank ok, along with a switch ok hehe

[@BH4x0r]

i've got no problem wiring up whatever light i want the only problem i've got is that i can't find decent mounting hardware for either mounting one of the lights like in the vid (i've got similar but 3 lens lights), that A) doesn't shake and B) doesn't fucking break from metal fatigue from the shaking/vibration and C) doesn't need a long tube style fork cuz i aint got no ebike like that i just have to go through very shittily maintained uneven terrain and streets everyday, aint no other way 'round it

[@Shahyan008]

Hey am not a pro, but if just buy the same headlight and remove the old headlight from my ebike will it work?? My ebike has 750 watt motor I think it brushless the battery that came with is 48V 20ah..

[@electricpower8130]

It supposed to work. But I’m not sure

[@Shahyan008]

@@electricpower8130 actually it works I just installed the same light last night ..

[@bohaman.]

May I ask how do you integrate the switch for the brake light? I'm having a hard time making my hydraulic brake signal to work with my relay to connect with the brake light

[@electricpower8130]

Pham Don you don’t need a relay for the brake lights. You can see all connections on that wiring diagram in the video description.

[@bohaman.]

@@electricpower8130 Hello, Thank you so much for getting back to me. May I ask which switch did you use for your brake? I am currently using the cyc controller and I'm using the magnetic brake level to send signal to the brake light. I need a optocoupler relay for it but having a hard time wiring it since the brake signal is 5v and the lights are 12 volt. I think my switch is different that's why I was thinking about using a relay. May I ask what is your set up? is it the single button switch you listed in the description? May I ask how did you mount it to the brake level? Thank you for your time.

[@electricpower8130]

Pham Don All brake levers using magnetic switch. I don’t use engine cut off, which means it’s not connected to controller at all.

[@cynmate2729]

Hi ElectricPower, I have a question relating to the Brake Lever. Do you mean the Brake Lever has Magnetic Switch built in or you've made a Magnetic Switch and attached it to the Brake Lever ?

[@gambit_toys6554]

Great! Much needed I have a Radrunner as well.

[@electricpower8130]

Cool! Thank you

[@alanablao4472]

Thanks for the diagram. May I ask what size gauge wire did you use? Thank you.

[@whalahiguy]

Does your brake/motor cutoff still work?

[@jpbach777]

This video is amazing, thank you! If only I had the capacity to do it by myself... I’m getting a SUPER73 S2 and I would LOVE to have a similar system installed on my bike. What lights are you using?

[@electricpower8130]

All lights are provided in video description

[@partiallyhuman]

I can't wrap my head around this but its still awesome 😎

[@electricpower8130]

Thanks

[@clintroberts1]

Mentioned the same on your last video, but can you just speak to hooking u only the headlights to the existing battery and cable system. Thanks!

[@electricpower8130]

I did connect the headlights with original wires. It works really good!

[@yochuckp]

I love your audience responses

[@ManMan-b5y5c]

Didnt understand a thing