the link to your custom PCB is not working. Can you help me please?
@DivineZeal15 сағат бұрын
The pcb is in the GitHub github.com/dkyazzentwatwa go to cypher-jammer
@rafaelrchoairy14 сағат бұрын
Thanks man. You are awesome!
@DerickJohnson-g7oКүн бұрын
Wireless adapter without technology
@marianocampos45722 күн бұрын
Hi, I built the device and let me tell you that it works wonderfully well, I put a 20db amplifier with a bandwidth of 50hz-4ghz and it has a range of between 50m with obstacles and without obstacles the range is crazy. Thanks for sharing the video
@kingawesomeness967Күн бұрын
Awesome! What specific amplifier did you use? I added the 10uf capacitors to the ground and vcc pins of the NRF24's but I want to improve everything about this even if its a marginal improvement.
@VengefulAntihero2 күн бұрын
The WiFi Pineapple has three 2.4GHz radios (MT7701U & MT7610U) and another dual band radio with the add-on module (MT7612U). That's a lot more radios scanning channels simultaneously than this router, as only one radio goes into monitor mode during recon, leaving the rest to channel hop.Seems a little disingenuous to make a direct comparison and not mention this, especially since you are *selling* them.
@markvincent68712 күн бұрын
Yoooo Congratulations bro🎉
@mozzde46752 күн бұрын
Congrats
@myjoyquest2 күн бұрын
Hey man!!! Not to steal any of your thunder...but I've been promoting you like crazy!!! Keep it movin!!!❤
@BADSHA-hacker2 күн бұрын
Congratulations bro ❤❤
@rogerbarros39982 күн бұрын
Hola buenas noches amigo como estás te escribo desde Colombia, cómo hago para hacer las conexiones del jammer con un módulo ESP-MODULE-32
@imcallingshotgun_vanlife2 күн бұрын
❤❤❤🎉🎉 Congratulations friend 😊 Would love to purchase a gray hoodie. Are they still in your Etsy?
@程月-d4d3 күн бұрын
Does it support multithreading?
@arminferdinand58493 күн бұрын
Alright now my neighboors gonna chill
@bens27183 күн бұрын
didn't watch cause your black
@godvaibhav3 күн бұрын
brother I recently saw a old GitHub repository for RFID cloner but it have some missing functions can you please fix them and relaunch because it is excellent ui and all
@EngineerNotFound4 күн бұрын
I've been curious about where these might be used in public in and around my city. A few years back I lived in an area where, every time I walked past a specific section of the road past a certain set of houses on my way to pick up some groceries, my bluetooth would cut out. I first thought it was a coincidence but it happened every time I went past that particular spot, so I believe it was either one of the houses, or one of the small businesses nearby. I even changed my route a bit to avoid it because not only did the bluetooth drop, but I had to disconnect the ear buds and reboot the phone to get it working again; really stringe. I've noticed it happens in a few other public areas on my travels, in particular spots, and I've always wondered if somebody is using a jammer in that spot. Anyway, pretty interesting project.
@weareanonymous-i5v4 күн бұрын
Give me that product link please 🥺🙏
@willemcashion35795 күн бұрын
Can you make a video wiring it to the board
@clintbishop91455 күн бұрын
Have you tried GL.iNet GUI then go to System > Advanced Settings, then click on the LuCI link, login to the OpenWRT GUI, then under System > Backup/Flash Firmware scroll to bottom option and load in the openwrt .bin file, and wait for it to complete. Then repeat the OpenWRT GUI process but load in the pineapple .bin, again waiting for it to complete? Your process is detailed but there is an easier way :)
@alvarezdavediaz5 күн бұрын
where we can found a list of phone devices with monitor mode compatibility? thanks
@DivineZeal4 күн бұрын
For the most part nexus 5 is the most popular for monitor mode already on the phone. Otherwise it’s best to use a usb WiFi adapter that is known to have monitor mode
@İsaTahaGüçlü5 күн бұрын
Can I use esp8266 nodeMCU instead of esp32
@DivineZeal5 күн бұрын
No just be esp32! Esp8266 is much weaker
@LysorngThai6 күн бұрын
is the range depends on the type of external antenna you use? how much range you got from 10dbi antenna?
@DivineZeal4 күн бұрын
I get anywhere from 10-30M , it’s better without walls
@barth72046 күн бұрын
thank you from america latina, we need this device so we can sleep properly at night
@_Debjeet_6 күн бұрын
Nice content bud, but how do i access the web interface?
@DanielSewell-q8e6 күн бұрын
Hey I can’t go to your website it says can’t establish a connection
@yaaboyrome22426 күн бұрын
Can a VPN help protect against this?
@muralihackerefx6 күн бұрын
One doubt I have esp32 30 pins how to connect please I want diagram please
@gustavoreges1636 күн бұрын
can i use display in this ESP?
@Nothin2see_6 күн бұрын
How reliable are these routers compared to the smaller ones from GL. I have a travel router from GL and it’s been great but isn’t compatible for this. I’ve heard the smaller ones don’t last long for this and tend to get warm. What are your thoughts?
@sassiaymen42498 күн бұрын
awesome setup <3 <<3 <3
@Abdulla-6998 күн бұрын
Make a video about ghost esp or marauder
@DivineZeal7 күн бұрын
Maybe soon!!
@surajladdagiri8 күн бұрын
Is there a way to attack both the 2.4 and 5ghz versions of a network at the same time? Devices automatically switch bands rendering the deauthing pointless
@_Debjeet_7 күн бұрын
I am currently using esp 8266 to attack the 2.4 Ghz Band simultaneously
@DjehutimasAsarRa9 күн бұрын
Do you have a video on how to use those settings?
@DivineZeal8 күн бұрын
I will make a detailed video in the pineapple settings and web UI! Forgot to make one
@chrismagistrado60149 күн бұрын
Will this work with routers that also have 5g?
@DivineZeal8 күн бұрын
Yes it will!
@chrismagistrado60147 күн бұрын
@ you know any good ones that have both 5g and two wireless nics, and ideally a battery or run on usb-c? I don't see a ton, glinet has something close but it's like $500. T_T
@lesudanais55479 күн бұрын
Bro i would buy
@DivineZeal8 күн бұрын
It’s not hard to make it! At most I can provide a custom pcb on my GitHub soon
@lesudanais55479 күн бұрын
Name of device please?
@DivineZeal8 күн бұрын
I have made a few videos making it for you 👍
@kingawesomeness96710 күн бұрын
where can I find the PCB for this build? Am not able to find it through the link
@DivineZeal8 күн бұрын
The pcb is on my GitHub here for you to print yourself, they currently are not available pre-printed: github.com/dkyazzentwatwa/cypher-jammer/tree/main/hardware
@stephenverburgt575210 күн бұрын
This is the most unassuming man I have ever seen. Someone put this dude in a movie!
@DivineZeal8 күн бұрын
Thank you for the kind words!!! Peace
@Marranrageh10 күн бұрын
Guys it worked 😁😁
@DivineZeal10 күн бұрын
Yesss I’m happy for you!!
@kennyyoon270111 күн бұрын
Hello, thank you for sharing these great videos. I have a question, can I use RTL8720DN (BW16) with RF NRF24L01 + PA LNA 2.4Ghz to make the wave range wider? And can you show me how to solder? Thanks
@DivineZeal8 күн бұрын
The range would not increase for 5ghz and you don’t use the nrf24 to do WiFi deauth. You can solder a uFL connector to the BW16 for a stronger dBi antenna but that is a little more complex
@qlexify857911 күн бұрын
ok so I have a few questions your an awesome yter btw! But 1st, when I buy it do I have to have it plugged in to use the features? 2nd is it battery powered? and if so does it come with batteries? 3rd what’s the basic things it can do without going into like too much detail ? Like when I first get it?
@anta777-k6x11 күн бұрын
Is it possible to use 3?
@DivineZeal8 күн бұрын
Yes I have a project with 3 coming really soon but it is more complex. I have the custom pcb that will be easy for people to make
@anta777-k6x8 күн бұрын
@@DivineZeal The problem with me is that none of these companies makes deliveries to my state
@BADSHA-hacker12 күн бұрын
BRO WHERE'S THE CIRCUIT DIAGRAM ❤
@BADSHA-hacker12 күн бұрын
Bro where's the circuit diagram ❤
@deshi811712 күн бұрын
Nice project! I haven't use these boards before, is it safe to power them using the USB or better the 3.3 pins? Can you use a web IU and deauth at the same time?
@DivineZeal8 күн бұрын
You can power with usb for this. The web ui for the other version without a screen disconnects web ui when you deauth. This display version still needs some work to use the web ui and deauth simultaneously
@10ИванИванов12 күн бұрын
Why the purple board wont work? It's basically the same :D
@DivineZeal12 күн бұрын
The purple board is BW16E & not compatible with WiFi scanning
@10ИванИванов12 күн бұрын
@@DivineZeal Do you tested it with the purple bw16e? Doesnt make sense to have wifi chip for connecting to wifi and not being able to use it.
@barcelbr379913 күн бұрын
Very well explained, is it possible to adapt a battery and antenna?
@DivineZeal12 күн бұрын
Yes there is an area for ufl connector haven’t tested
@AfckingPrincess13 күн бұрын
could you do a video on how to download themes/games? I have a modded 3ds xl so I know how it works but it's my first time doing it on a nds lite, i guess it doesn't really work the same way? thanks tho, this one helped!!
@MrTwister4202 күн бұрын
you cant do themes on ds lite of what im pretty sure
@AfckingPrincess2 күн бұрын
@MrTwister420 actually you can, I figured out how to do it :)