Did any one have any misfire codes along with the P018C fuel sensor code?

You are a piss poor cameraman😂😂😂😂😂😂

What is the white tape for?

Lots of help, thanks 👍

Folks, don’t touch your bulbs with your bare fingers. This will cause your bulbs to overheat in that spot and blow early. No fingers. Wear some rubber gloves if you can’t do this.

Thank you

Great video, thanks so much for posting it, it was extremely helpful!

TLDR: if you don’t hear two clicks when reinstalling the tube try lubing the lip it needs to go over. Just had to do this repair myself, having never worked on a car before, since the two different men who said they could take care of it were no shows. The clip going toward the back of car definitely did not click. I did feel it go past the lip, but no locking. I started the car and no fuel was leaking so I assumed it was fine. But I had a very bad feeling that that might not be the case if driving the car around. The next day I started the car again to confirm my fear and fuel was now spraying every where. You don’t really need a tool to get this part on right. Turns out the fuel helped to lubricate the lip and after that and a two handed effort (one hand on each part pushing together rather than just pushing it from one end) it locked on. It’s TWO clicks you want to hear.

Hey Michael. Thank you for guys like you who take time to make these videos for the rest of us. I just got the Fuel Line and waiting for the wire harness. I am about to tackle this known issue and just want to know how things are since the fix? Would be awesome if you could give us an update. Truly appreciate you man!

For hybrid owners, DO NOT cut those wire short. 😂 Please compare length with old wire and add some slack.

Thank you SOOOooo much for making your video. You helped me a great deal!! Keep up the good work, brother!

Hi Michael, mi daughter and my self fix this code, but now is show the code P018D, wondering if you know how to fix this problem ?

I cant for the life of me find a damn diagram for thos particular fuse panel. It's enough to drive me mad.

Hi Michael. I’m very grateful that you made this video. Even with several videos made on this exact topic, yours was the only one that was informative enough for someone of my skill level. I also really appreciate how you handled sharing the solution to the slight problem that you ran into. Thanks again!

Thank you

Thanks man but tell us that those plastic clips are NOT attached to the harness and can fall into the engine bay!

thank you

Use A flat head screw driver when installing intake clip to help push it all the way in if needed. Thanks for the vid.

Remove 2 screws and pop the entire light out from the front to change.

Thank You !😀

Can u plz advise which grease is best for caliper sliding pins ? When I bought brake pads , they sent small packet of grease. I guess that is only to be used for brakes but not calipers .

And what do recommend after to set the brakes. The 50 MPH run then brake slam?

Just subbed good video. What is the size of the lug nuts for the tire @Michael now

Thanks for the information, I ordered the H11 because the online App for the local auto parts store said it was an exact Fit. So just by chance I watched your video and decided to pull the bulb and yes it is a 9005. I believe that you should wear gloves to keep the oil from your hand getting on the glass of a halogen bulb creating hot spots and burning the bulb out quickly. Reflector Low Beam - H11LL Projector Halogen Low Beam - 9005HL+ All High Beams - 9005LL

those rotors were hammered :)

Thanks for the tip this was quick and easy except I have the hid lights they a ñitttle more difficult not enough room

You trusted your life to that cheap Chinese jack and no jack stands. Please people don’t do this. PLACE jack stands!!! Otherwise nice work.

I replaced my fuel preassure sensor and now i have a P1DBD and it says replace fuel rail preassure sensor do i have to drive it for a while to go away or did i do something wrong?

It also says in the user manual that it takes 9005. So everyone can save a lot of time by reading the manual. Your user manual should always be the source of truth. Thanks for the content though.

My 2019 pacifica threw a code p1457. Brought it to an auto shop and they quoted me $550 but I know I can do it myself for cheaper. Is this code similar to the P018C? Would I need to splice on a 2019 model too? thanks

Thank you bunch ...great video...to the point ..followed you and changed mine today. Hesitation went away but code stayed. How many miles should i drive to clear CEC p018c

Undertaker The legend 💪👍

Great video.

You push the white clip in. Pop up the blue clip up, push in the white clip. To reinstall, push the white clip in and then push the red clip down to lock the white clip in place..

Awesome video! What about the front pads and rotors? Same process? Thanks!

😮❤❤❤❤❤😂

Michael- Love it. nice drone! I'll be back! 🌟

9005 is for projector-type headlights H11 is for without projector-type headlights

Where to put my thing?

What's the reason anti seize isnt smeared on the inside hub mating surface of the rotor as well?? Thank you. A great video

Why is there even a need to splice on a new pig tail. Seems like an unnecessary step, not like plug was oil soaked

Can u find me one

A true professional Changed the brakes while high 😂 Appreciate the help my dude, you made it look easy

I’m learning the hard way too

Fantastic!!!!!!!!!!!!!!!!!!!!

My 2017 has the 4 inch screen and doesnt have that service mode. Hope its not an issue for me

Did the check engine light go away on its own? Thanks for the video

needed a dong

on the fuel line connection at the intake if you snip off the line about two inches after the white retaining clip you then can rotate the fitting and push down on the white clip to release the line. thats the design of that clip.

Thanks for sharing and regards.