Thank you 👍🙂

👍Thank you 👍

4990 motor from max6 g2 combo won't fit in a stock car. Custom motor mount is needed. My works with Cen Reeper center differential, which has 66t spur gear

OK, can you share the part number for the GPM shock absorbers?

👍 Thank you

It is a custom made motor mount with modified HoBao 85135 sliding part

@@Marek_Z_RC thx

@@Marek_Z_RC nice one! Did you make the mount on your own? I want to do a similar conversion but still nmo clue which mount to use. And why did yoo use the reeper DIff, is it because of the big gear? cheers!

I made project myself, but parts were made by CNC shop in China. I can send you my drawing to make an order but building might not be easy. You need to find driveshafts with the correct length or cut and weld any driveshafts (Cen diff is longer). You also need to precisely drill and tap holes in chassis or motor mount, which can be difficult sometimes. Motor mount can be made at home if you have good tools. Stephane Z makes many homemade parts, he made a motormount similar to mine too. Yes, cen diff is for big gear, with which I don't need any additional gears, like in a stock design.

@@Marek_Z_RC ok thx, i buyed an other

Thank you 👍🙂

👍dziękuję 🚙

Thank you 👍🚀

Thank you 👍 It's better on 8s 🙂 I changed tires mainly because stock wheel broke on the first ride 🔧

👍 Thanks 🙂

🙂thank you 👍

👍 Thank you 🙂

Thank you 👍

I'm in Gdańsk in Poland 🙋‍♂️

Thank you 👍🙂

Thank you 🙂👍

Thank you 👍 Esc: HW max8 G2 Motor: HW 4278 2250kv Pinion: 17t Diff oils: f/c/r 100k/500k/50k cSt Shocks: Stocks are bad, as you noticed. Silver shafts from MT+2 are slightly better but not goo enough. (I heard that HoBao stopped producing these black/brown shafts and newer MTX come with silver shock shafts) There are some other shafts that would fit: I tried Arrma 330796 and they are worse than HoBao. I didn't try CEN GS507 which might fit too. Shock rod ends are good, I didn't break any. (HoBao makes good plastic. I use HoBao 94010 rod ends for Tekno MT410 camber links, because stock parts were breaking) Pistons: Put bigger washer under shock piston and keep stock washer above it. Tighten nut well, as bigger washer doesn't leave much space for locknut. I use normalized DIN9021/ISO7093 M3 washer. Is stock shock set up too stiff? Maybe, it might cause some breakages too. You can use thinner oil or drill bigger holes in pistons or use MT+2 pistons which have 4 holes. I don't know what weight fluid I use, I just mixed many 👨‍🔬 I kept these rubber bump stops. I just ordered some 'GPM rear dampers for Trx Sedge'. They are 143mm long, so should be ok. Shafts are 6mm. My experience with GPM shocks is that they wear and start leaking but it might be the best solution for now. If you don't want GPM you can try stock Sledge shocks (9661), I think their shaft are 5mm but I'm not sure Camber, toe, I don't focus on this as long as it looks not bad. Wheels around vertical. Front straight or slightly outward. Rear slightly inward. (I made some parts to use Mugen upper arms 🙂 ) Servo: AGF SA81FHMW (it might be the strongest rx powered servo and it's not slow too) Stock car doesn't turn well. Turning radius is very big but you can use some brake and throttle to slide it. I will try to improve steering a little bit. Next video will be with very different set up, which I'm working on since long time 🔧

Thank you 👍 I did it some time ago with mt410 too: kzbin.info/www/bejne/jIKUgZ-dbr2ad7Mfeature=shared 🙂 I also tried Switch Flip to Reverse Flip but no successful attempt yet

@@Marek_Z_RC oh i forgot about it ! you got so many tricks now ! i also forget my own tricks ! because i mostly done them 6 years ago ! time flies by !!!

Thank you 👍🙂

In this video I used Backflips LP and after 2 sets broke, I bought Proline Badlands 3.8". Badlands 3.8" are slightly smaller and more narrow than Backflips LP. There are also Badlands MX38, which are much bugger, too big for small mt410, but good for HoBao MTX I think that Badlands 3.8" might be more durable than Backflips LP, but they are also smaller and lighter, so they give less air control All tires can explode. Usually belted tires can survive most rpm but balooning is very important for air control, so it depends what you need

@@Marek_Z_RC thank you for answer.!

After breaking some shafts and rod ends I tried GPM shocks. They are in general more durable during crashes but they wear faster. Now I came back to stock shocks and I also have some Hot-Racing aluminium rod ends to try

Odcinało na skoczni, przy zwykłej jeździ może by było ok. Ostatecznie używałem max5 G2 + 650kv na 12s, i miałem też mniejszą zębatkę odbierającą od 30°N (BWS)

@@Marek_Z_RC ale odcinało że wysoka temperatura ? Czy za duży pobór a za małe pakiety Nie masz już Losi ?

Podobno jest tak, że im więcej kv, tym większy prąd i bardziej obciąża regulator, który ma zabezpieczenia przed przeciążeniem i dlatego odcinał moc. Losi miałem pożyczone na kilka miesięcy od Stephane Z, już odesłałem

To jest Oliva Trails w Gdańsku

Triton, ale nie wiem czy ta firma istnieje nadal

Thanks 👍🙂

Thank you 🙂

Thank you 👍🚀

Power wasn't a problom for a fakie backflip. It didn't have enough stability for a good flip Reverse Flip has softer braking, so it was easier to keep stability than in a fakie backflip

yeah, proof that layout is very important for a good balance @@Marek_Z_RC

Thank you 👍 I'm sure you can do all these tricks too. Maybe even Reverse Cork 360° would be possible 🚀

Thank you 🙂👍

Firmware update? I didn't try that It's ok with 650kv but maybe it would be even better with an update - maybe I will try

Thank you ⚡

👍 Thanks 🙂

Thank you 🙂👍 I will have some even better steering upgrades soon 🔧

Thanks 🚀

Thank you 👍 I have reverse power set at 100% ⚡

Temperatury nie mogę ocenić, bo tylko w zimnie jeździłem tym autem ❄️ Ogólnie mocny model, od razu warto zalać dyferencjały - ja dałem f/c/r 100k/500k/50k cSt. Można dać lepsze podkładki pod tłoki amortyzatorów - poszerzone m3, żeby lepsze oparcie było. Koło mi pękło na pierwszej jeździe ale dam im drugą szansę w lecie, mimo że nie wyglądają na najmocniejsze. Po pęknięciu używam Badlands 3.8" ale zamówiłem większe Badlands MX38. Dużo innych zmian planuję jeszcze - system 8s, inne długości podwozia...

O to super az milo ogladac bede szukac nasz jakies dobre sklepy zeby kupic no I jak z czesciami zamiennymi? Pozdro

RcFox (🇩🇪) ma najlepsze ceny i dobrą dostępność części HoBao Jest też MK-racing, Robitronic i inne Na Wielkanoc RcFox pewnie zrobi zniżkę 5% na wszystko + dodatkowo 3%. Przed Wielkanocą może być 15€ na zamówienia powyżej 150€ i 9.05.2024 7% na wszystko. (Chyba że inaczej zrobią w tym roku 🤷‍♂️)

@@Marek_Z_RC super dzieki Bede szukac a twoj monster truck tez w rcfox zamawiales?

@@paweldedys9033 Tak, MTX w RcFox kupiony. Kupuję też tam dużo części HoBao, Hobbywing, Pro-Line, Losi...

Dziękuję 👍🙂

Thank you 🙂 🚀

Thanks for the video rec. He hasn't beat your 720 revcork, though.

oh he did some tricks that i didn't do. and he learned super quickly !! i'm old and slow !@@Drunken_Hamster

oh and marek doesn't have the right ramp/setup/landing pad like i have ! i'm a lucky bastard ! @@Drunken_Hamster