ABIMOTO

Пікірлер

@NaveedTaj-r1i Ай бұрын

Can you get the wheel arches ready made of the shelf or do you make them yourself?

@davypeugeot 2 ай бұрын

Thank you ,im just after looking at a campervan to buy and he said it had that issue

@daily-uploads-2 2 ай бұрын

man i have a question , what about the mounts how did you make it fit does the engine stock mounts fit in the e46? or do you need to do some cutting or completely gp custum mounts

@BTR-Fabrications 3 ай бұрын

Hey mate, taking the gearbox out of my van right now to get to the clutch. Your video has been very helpful. Where did you get the single mass flywheel and clutch kit from?

@dcswings 3 ай бұрын

thanks for sharing man

@andymitchell368 4 ай бұрын

Bruv you going to bless us with some content ❤

@waaki135 4 ай бұрын

Is it possible to swap a small case with a medium case without changing the driveshafts?

@keithm6117 5 ай бұрын

Hi... panel fit looks awesome and you're prep is 100%, can you tell me where did you get the panels from please...

@1961kickboxer 6 ай бұрын

Abi is the 36mm nut normal or a hex head cheers steve 2003 mk6 fwd.

@tommyleechainey7608 7 ай бұрын

The longer prop shaft came from what model? I cant find any

@stewartkarol757 7 ай бұрын

Excellent video 👍👍👍

@billhoggy4461 7 ай бұрын

You don't know how much you help people like me out on here so just like to say thank you for the great videos

@ABIMOTO 7 ай бұрын

Thanks for taking the time to comment. Glad it helps out 👍

@AA-ol7xn 7 ай бұрын

i see you got the gearbox cup from vw main dealer how much did it cost ?

@georgestewart1983 8 ай бұрын

Watching your excellent work made it look quite easy and has given me the confidence to do this on my own van! thanks

@mariusgeocolea5678 8 ай бұрын

God bless you

@mojornfreemantle1890 9 ай бұрын

Hey bro I am about to do the same thing with my tacoma xrunner, I am going to convert a zf getrag 5 speed and match it to my 2grfe v6 engine. I just want to know if the modification stood the test of time. Was it a success. Can I see videos after?

@FintanSpring-xt3ju 9 ай бұрын

Top guy knows how to explain and does an excellent job top mechanic 👍👍👍

@ABIMOTO 9 ай бұрын

Thanks 👍

@woods702 10 ай бұрын

Where could I get one of theses motor mounts I need the trans one

@adamtym4342 10 ай бұрын

Hej, what about corrado???

@starfox_wr-45e93 10 ай бұрын

Hi mate. Long time no see Do these cars suffer from the rear subframe cracking like the e46 coupes and sedans? I just got one, but might bail on it as a drift project if they do.

@ABIMOTO 10 ай бұрын

Hi mate. It's a bit of a strange one that as I've never really heard of the compact suffering from subframe issues. There's no logical reason for it as they are the same rear end as the coupe, saloon & touring.

@ABIMOTO 10 ай бұрын

To be fair as a precaution I always plate the subframe mounts & RTA when ever I'm building an E36 or E46. I just view it as preventative maintenance. There no such thing as mechanical sympathy in a drift car so my view is add strength whenever possible 👍

@starfox_wr-45e93 10 ай бұрын

@@ABIMOTO Thanks for the replies bro. I've not heard of it really either, so I've been asking around a bit. Probably should have done this before buying the car tbf 🤣 but as you said, it doesn't get reported from what I've seen, yet the others do despite being what I assume is the same floor mounting point design shared between all of them. I've already got to rip out the n42 and replace it with something else. I bought it just be a fun, mess around car not a pro-spec car or a never ending project/money pit. So the thought of having to tear into both ends right away.... oh boy, not appealing. 🤣 It's already so easy to get carried away with project creep. I said just some simple cut knuckles/adaptors will do for lock, but find myself staring at full SLR kits... Car isn't even delivered yet lol Anyways, thanks for the response and solid advice. Happy holidays brother 👊🏾

@wtfronsson 9 ай бұрын

@@starfox_wr-45e93It's a lighter rear end so this why subframe issue is very rare compared to big E46. Less stress. But if you drift or race it might come up sooner rather than later. Strengthening, however you want to do it, is a good idea.

@starfox_wr-45e93 9 ай бұрын

@@wtfronsson cheers

@geovannicarrillo4053 11 ай бұрын

Donde compraste el soporte ? O lo fabricaste ? El que esta en la caja

@billhoggy4461 11 ай бұрын

I can I ask how long did it take for you to do the clutch and how many wires atto be unclipped great video or what wait was the ramps hold weights

@billhoggy4461 Жыл бұрын

Great video how long did it take you

@jasont8342 Жыл бұрын

Interesting video my friend now I was removing /changing the cam sensor and the 8mm bolt has somehow fell in the recess of the gear box I haven't tried to start van do you think I have to remove box or can you think of a way to retrieve the bolt it's been a bad day :(

@ABIMOTO Жыл бұрын

Hmmm. You might be able to loosen the gearbox bolts enough to pull the gearbox back 10mm and hope that the bolt drops out.

@thomasmedhatt Жыл бұрын

Nice work! You use or original pressure plate and just change the clutch disc itself or? I have the welder and soon I have the need to probarly make this myself. Did you just use a angle grinder for cutting the original bellhousing or did you mount it in a lathe? Thanks for any replies, Greetings from Sweden.

@jamiebennett975 Жыл бұрын

how many nm are the bearing bolts please

@philwood626 Жыл бұрын

Excellent explanation. What if after doing all this front assist remains unavailable? Any clue?

@davidwebb8877 Жыл бұрын

Lovely job.👍

@michaelstojovski1593 Жыл бұрын

I have a problem to move the sidetrims at 1:34 could you explain exactly what i need to do

@danielwi11iams Жыл бұрын

Hi great video. I fitted one to my car years ago but could get anyone to code the car. I was wondering do you not have to do anything to the engine management system. which notifies the engine that the car will be pulling something which changes the performance of the engine for cooling. Could this be done via a Carly OBD system? if anyone as done it can you point me in the direction to that.

@frederickwoof5785 Жыл бұрын

Got to do my transit camper conversion one day. It's rust is gradually accelerating. Front inner wings first.😢

@aurelius1973 Жыл бұрын

good job 👍

@TheTreborloco Жыл бұрын

Where are you based?

@davisroberts9858 Жыл бұрын

thanks, very helpful

@blandyhhh Жыл бұрын

Today, I welded a gear box mount. It didn't take to it the best. It start bubbling and getting perosity in the welds. It may have been contamination from not degreasing or may have been welder settings(pulse frequency or balance). Could you please let me know these two figures ( Hz and %) if you can remember. Thanks

@AnyeloRodriguez-co7jj Жыл бұрын

Hello friend, I have a golf mk2 gti with a haldex controller, we are currently installing it for you, but we have a question with the connection of pin number 5 K-line, I spoke to the person who sold me the computer, but I do not understand him, he tells me that it is connected to my obd car the golf mk2 I have another ecu not the original of the car could you guide me please

@rajivsingh4787 Жыл бұрын

How do you get your haldex to work, aftermarket ecu, and is it simple and straightforward?

@Archiegser Жыл бұрын

Excellent simplified explanation Abi. Hopefully it will resolve my poor understanding and get my coding completed successfully.

@domantasvadluga8457 Жыл бұрын

Hello, how to connect 13pin original wiring harness on a4 b8

@8163-i5n Жыл бұрын

I like your channel, but just make it awd next time 💪🏿🤘🏿

@chick99936 Жыл бұрын

how much would something like this cost to do

@marca5883 Жыл бұрын

I'm on the final stages of doing both sides and steps on mine, what a job it's been! it's nice seeing someone else tackle similar...

@rmssmr8187 Жыл бұрын

How did you do the calculations for the abs break code ??

@ABIMOTO Жыл бұрын

Using the help function on vagcom it will tell you what number needs to be deducted from your existing code if you are now adding a control unit.

@tariquetulloch6643 Жыл бұрын

Sick!

@ABIMOTO Жыл бұрын

Cheers matey.

@rmssmr8187 Жыл бұрын

what is the reference of the red connection harness that goes to the control unit???

@ABIMOTO Жыл бұрын

From memory the red connector was part of the wiring kit.

@Lukinhas3557 Жыл бұрын

Como ficou o funcionamento?

@vincemarshall8550 Жыл бұрын

hello mate ,dont know if you will read this but just throwing it out there but im after doing this on my mk7 ,its a 4wd so more fun and games but just to confirm ,you need a different fork and bearing for the solid fw? thanks for the video

@ABIMOTO Жыл бұрын

Hello matey. The original fork and release bearing should work with the SMF clutch. I replaced mine because It broke when I reassembled everything. Hope that helps.

@vincemarshall8550 Жыл бұрын

@@ABIMOTO hiya son! thanks for responding ,just doing some research ,looks like mine has one of those concentric hydraulic bearings ,plus looking at pictures there no aperture for a fork so im guessing no fork and the same bearing as dmf ,thanks again ,all the best my friend

@Iron_Lion_Of_Zion Жыл бұрын

Personally, i cant work in a messy area. Just looking at everything scattered over the floor, is making me wanna go, & clean it all up.

@tomfewins5803 Жыл бұрын

I remember watching you adapt the manifolds on the vw and I was thinking wow you're talented, I appreciate your honesty on biting of more than you can chew. I have certainly done the same. This is a fantastic video. So honest!

@ABIMOTO Жыл бұрын

Hello, thanks for your comments. Hopefully next year I'll finish starting things and start finishing things. 🙂

@nateuk2542 Жыл бұрын

Thanks Abs 👊🏾

@ABIMOTO Жыл бұрын

More than welcome

Ең жақсы KZbin

Пікірлер