Thanks mate, legendary, helped heaps with coding in the towbar on a Q3. I'm doing the job tomorrow, let you know how I go 👍
@ABIMOTO3 жыл бұрын
Cheers bud, glad it was helpful 👍
@10GTE3 жыл бұрын
@@ABIMOTO I did that 8U Q3 today and boy what a mission, the harness has to run all the way to the fuse box and bcm under steering wheel, be connected in etc. With the coding I followed a very similar method to you, except in the 69 trailer coding I went country code then all 00's otherwise I got a "Check towing bracket" fault on the dash. The module still works if you select 00 or no coding in the tow module.
@ABIMOTO3 жыл бұрын
Sounds like you had more fun than I did 👍. Definitely worth it when it all works in the end.
@Archiegser Жыл бұрын
Excellent simplified explanation Abi. Hopefully it will resolve my poor understanding and get my coding completed successfully.
@dcswingsАй бұрын
thanks for sharing man
@stewartkarol7575 ай бұрын
Excellent video 👍👍👍
@timb1062 жыл бұрын
Amazing video. Clear and helpful
@ABIMOTO2 жыл бұрын
Cheers, glad it was useful
@eduardomarcelobenitezcarre4893 Жыл бұрын
Can you help me? with te amarok 2014 westfalia module. Doesn’t work correctly, I have difficult to code with my vcds 15.7 please
@ABIMOTO Жыл бұрын
Hi there, what exactly is the problem
@philwood626 Жыл бұрын
Excellent explanation. What if after doing all this front assist remains unavailable? Any clue?
@ericstockton60253 жыл бұрын
Easy with out taking the exhaust done completely just drop the hangers and you can get your hand in there
@ABIMOTO3 жыл бұрын
Yeah I tried that but in the end I just found it easier to drop the exhaust out of the way.
@BikeGunCarGav3 жыл бұрын
I’m fitting an OEM loom and trailer module to my Tiguan but I can’t find anyone to code it, most places have no idea what you are talking about! Fancy helping me code mine 😂
@ABIMOTO3 жыл бұрын
Have you got access to VAGCOM ?
@BikeGunCarGav3 жыл бұрын
@@ABIMOTO it’s ok, I fitted it and it hasn’t thrown an error, and strangely - everything works!!
@ABIMOTO3 жыл бұрын
Result 😁
@Osman.Ozturk2 жыл бұрын
Good video thank you. should i connect the tow cable for changing 69-trail screen?
@danielormes21243 жыл бұрын
Great video. Are the reversing sensors only disabled when hooked up to a trailer? Or permanently disabled when the tow bar is on? Thanks Dan
@ABIMOTO3 жыл бұрын
The reverse sensors are only disabled when hooked up to the trailer.
@danielturcsan95313 жыл бұрын
Can you tell me the part number of the 2 screw nut what you attach to the chassis?
@ABIMOTO3 жыл бұрын
Sorry I don't have the part numbers as they came the tow bar kit
@a.e.6883 жыл бұрын
That is great. Thank you bro
@ABIMOTO3 жыл бұрын
Glad it was helpful
@danielwi11iams Жыл бұрын
Hi great video. I fitted one to my car years ago but could get anyone to code the car. I was wondering do you not have to do anything to the engine management system. which notifies the engine that the car will be pulling something which changes the performance of the engine for cooling. Could this be done via a Carly OBD system? if anyone as done it can you point me in the direction to that.
@domantasvadluga8457 Жыл бұрын
Hello, how to connect 13pin original wiring harness on a4 b8
@michaelalexandergill7773 жыл бұрын
does the trailer blinker light only flash when a trailer or caravan is hooked up or is it on all the time ?
@ABIMOTO3 жыл бұрын
Only when the trailer is hooked up 👍
@michaelalexandergill7773 жыл бұрын
@@ABIMOTO cheers I am also having an issue with getting the fog lights to work. I have one of these test gadgets that you stick in the back of the 7 pin socket and all lights work apart from the fog light. I've read online that when the car is in tow mode it automatically switches off it's fog lights and just sends power to the trailer. Do you know if this works with this test device plugged in or do I need to try it on an actual trailer / caravan ?
@ABIMOTO3 жыл бұрын
Yes you need to try it with the trailer or caravan connected. I'm sure the cars rear fog light is disabled when hooked up to stop glare.
@michaelalexandergill7773 жыл бұрын
@@ABIMOTO Thanks
@mariusgeocolea56786 ай бұрын
God bless you
@fausto57332 жыл бұрын
Hi was wondering if you can let me know where you get that tow bar from. I have a 2007 a6 sedan.Thanks
@ABIMOTO2 жыл бұрын
Hi there. I got mine from PF Jones 👍
@rmssmr8187 Жыл бұрын
what is the reference of the red connection harness that goes to the control unit???
@ABIMOTO Жыл бұрын
From memory the red connector was part of the wiring kit.
@michaelstojovski1593 Жыл бұрын
I have a problem to move the sidetrims at 1:34 could you explain exactly what i need to do
@rmssmr8187 Жыл бұрын
How did you do the calculations for the abs break code ??
@ABIMOTO Жыл бұрын
Using the help function on vagcom it will tell you what number needs to be deducted from your existing code if you are now adding a control unit.
@michaelalexandergill7773 жыл бұрын
hi , how do you de pin that comfort control module, do you need a special tool, thanks
@clutchkickit67303 жыл бұрын
Hi there. These a little tab on the connector block. You just need to push it down with a small flat head screwdriver and then the wire will pull out of the connector block. Hope that makes sense
@michaelalexandergill7773 жыл бұрын
@@clutchkickit6730 thank you
@theemeraldcrusher02633 жыл бұрын
Could you do a tow bar for my a8 d3 please?
@ABIMOTO3 жыл бұрын
Hi there, at present I only work on my own cars 👍
@johnhughes22753 жыл бұрын
Good video I have a very similar car I live in Surrey Leatherhead Would you be interested in fitting a tow bar for me
@ABIMOTO3 жыл бұрын
Thanks for the vote of confidence but I only work on my own stuff at the moment 👍