was having problems with my starter so got a replacement. Like a bonehead I had to cut a few wires and didn't label them as I did. Any chance I can get a pic of starter wiring
@mbetancourt4th14 күн бұрын
Who made the full front bumper replacement
@BanackIndustries13 күн бұрын
gridiron bumper corp
@mack_titan18 күн бұрын
Hi, are there any lift kit options to fit these larger tire-wheel combo? I have 40" tires on 22.5 and I need to figure out how to lift the truck (2012 F 550). There are no lift kits options at all...For the rear, I can put in blocks but front is an issue.
@BanackIndustries17 күн бұрын
Fabtech is the only company I know of that makes a lift for the older generation of f550 trucks, they make all the way up to a 8in
@canadianwild473718 күн бұрын
First off, the truck looks great. I’ve been considering putting 22.5’s on my service truck. Where did you get the kit?
@BanackIndustries18 күн бұрын
@@canadianwild4737 www.duallywheelscanada.ca
@BanackIndustries18 күн бұрын
@canadianwild4737 it was the best decision I made, truck rides 100 times better having a bigger tire and the engine sits 500rpm lower at hwy crusie speed
@canadianwild473717 күн бұрын
@@BanackIndustriesdid you need to install a lift, or leveling kit?
@BanackIndustries17 күн бұрын
@@canadianwild4737 My truck is stock height
@canadianwild473717 күн бұрын
@@BanackIndustries what was the final cost of the upgrade?
@truckinmike752623 күн бұрын
That voice smh
@BanackIndustries18 күн бұрын
Shake it off like T-Swift baby
@ShatteredRoxanneАй бұрын
are these the same headlights that gabe farrell productions had in his old ford truck cardi b
@BanackIndustriesАй бұрын
@@ShatteredRoxanne yup
@stgyoungfrizzleАй бұрын
Can I remove this before I delete dpf??? Or do I have to do both at same time??
@BanackIndustriesАй бұрын
@stgyoungfrizzle - tuning is required to delete the egr yes. Ive personal never delete the ccv filter before tuning but there is no sensors on the 2020+ models so I imagine it wouldn't notice
@huntaaa4Ай бұрын
man got 10,000k miles bro's got like a billion miles
@BanackIndustries18 күн бұрын
Not a clue what you mean by that, thanks for watching the channel 👍
@someguy4476Ай бұрын
The guys at SPE are a bunch of jerk offs. My return line broke this morning at the fuel filter and pumped almost half a tank of fuel all over my truck and road. Fucking Ford garbage. Black Gold Diesel got me all fixed up though.
@jack.w2307Ай бұрын
I'd recommend getting a vacuum filler for the cooling system saves a ton of time and way easier, once i used it for the first time i never wanted to go back haha
@BanackIndustriesАй бұрын
They are definitely handy devices
@samkiepprien3858Ай бұрын
So I just broke the Bolt at the bottom of the coil spring that holds it in place. You have any suggestions on fixing that? It's almost slid off completely.
@BanackIndustriesАй бұрын
Drill/extract the broken bolt out
@LivinglethallifeАй бұрын
Awesome. Gotta get a 550.
@Gilmore304Ай бұрын
Why? Buy tuber yourself, delete yourself, ford guys 😂 Fords delete process is the most efficient and owner friendly process you could own. Save your dad some money and work on your own gear
@BanackIndustriesАй бұрын
@Gilmore304 did you even watch the video, only part of the delete that wasn't done by myself, is i took the truck to Am Diesel Performance and they did the tuning at their shop. At the time of filming this video the only option for tuning was bench flashing the ecu, yes the 17-19 powerstrokes are able to be tuned remotely with a ezlynk, but the 2020 and up still require a ecu bench flash
@Gilmore304Ай бұрын
DO NOT OIL! ! Grease with petroleum or any seize the flanges on nuts.
@BanackIndustriesАй бұрын
You oil the flange between the nut my guy
@michaelhunt53812 ай бұрын
what would happen if you sent it to someone in canada that person sends it in to get tuned and then sends it back to you?
@BanackIndustries2 ай бұрын
Great question 🤔
@ScottLight102 ай бұрын
Looking good, just found your build. Backed up and watched all the videos of it. In the process of building a Ranger myself.
@BanackIndustries2 ай бұрын
Hell Yeah 🤘
@dcb_7772 ай бұрын
How many plugs are disconnected under the hood?
@BanackIndustries2 ай бұрын
Zero unless you do a egr delete, then there's 2
@dcb_7772 ай бұрын
@@BanackIndustries Zero!!?! So if the EGR stays physically intact and no SOTF, no plugs need to be disconnected? So strange. Lots of different opinions. Seems like there’s no 100% way. Depends on how your tune was written maybe?
@BanackIndustries2 ай бұрын
Here's the deal, I've had 2 2020 6.7 powerstrokes, this f350 and my F550 that's in recent delete videos, both units I went and had both amdp engine and transmission tuning flashed on the trucks, then without unplugging or removing anything from them, drove them 1hr + home both times, the only reason you remove everything and unplug items is to prevent a short in the system over time if they fail
Looks cool. Hope to see it on the roads of GP soon!!
@starclassic7122 ай бұрын
Sweet!!! Cool video ma man.
@dakotamcneely57792 ай бұрын
What weight rating are those springs vs old
@BanackIndustries2 ай бұрын
Not a clue what the actual spring rate is. , but they came off a 2020 f350 srw truck I had
@jtopdawg62 ай бұрын
Aliens took my emissions equipment for parts when they spaceship broke down. Darnest thing.
@BanackIndustries2 ай бұрын
THANK YOU for the good laugh
@joshmarauder2 ай бұрын
How do u like amdp? Can u use amdp for tcm and ez lynk for engine tuning?
@dallascottle37143 ай бұрын
Earnie from Sesame Street
@BanackIndustries3 ай бұрын
Who me
@DentsideAddict843 ай бұрын
I did a 5” flopro on my 17 ccsb 6.7 ford and it fit horribly for me. It wasn’t expanded at all so I had to flare everything and pound it all together. Was very disappointed. But my dirty diesel egr and CCV delete was amazing.
@BanackIndustries3 ай бұрын
I've never had a issue with a flopro setup and or ever heard of that, must have been a Monday made pipe 🤔
@DentsideAddict843 ай бұрын
@@BanackIndustriesyeah everyone I talked to said they slip in nice and easy but it was awful. Emailed flopro about it and they didn’t say anything back. Took me nearly 4hrs to get it installed. And I had the DPF out in 45min.
@LufieH23 ай бұрын
It what about the fuel pump ?
@BanackIndustries3 ай бұрын
Mounted on the frame as an inline setup
@jrpro1303 ай бұрын
Any issues with the hub centric lug nut? They scare me hauling weight like these trucks
@BanackIndustries3 ай бұрын
Hub centric nuts are the flange style that just provide clamping force and then the weight of the unit is transferred to the wheel with the Hub / pedestals, it is the strongest available setup and how all newer semi and most 3/4 ton and 1 ton trucks are from factory
@6speedguy8453 ай бұрын
I have used harness seat belts many times before
@someguy44763 ай бұрын
We can’t keep the Sailuns(?) on our fleet of 18 wheelers. They don’t last. Ended up going back to Michelins Great set up though!
@BanackIndustries3 ай бұрын
What kinds of issues were you seeing with them? blowouts? Or just premature wear?
@lukecreaser87963 ай бұрын
Who notched your wheels? Been looking at them on Dually wheels Canada website
@BanackIndustries3 ай бұрын
Got them from Duallywheels.Ca, Click the link in the video description
@wesleywilliams81294 ай бұрын
These are the worst videos ever.
@BanackIndustries4 ай бұрын
Feel free to make your own
@JLBRACING21t4 ай бұрын
What did uoi use to rivot it back to gether
@BanackIndustries4 ай бұрын
Aluminum soild rivets and a air hammer
@sav3004 ай бұрын
How has that transmission tune been doing?
@BanackIndustries4 ай бұрын
Hasn't blown up yet
@sav3004 ай бұрын
@@BanackIndustries good deal. Getting that trans tuning installed myself this weekend and I am really excited to see how she runs. Went all out with the new intake manifold and all.
@robertsanchez37845 ай бұрын
How can I get that in the US if website said can’t be shipped?
@454budman4 ай бұрын
try diesel dudes or unlimited diesel
@BanackIndustries3 ай бұрын
Not too sure anymore, sadly lots of the canadian companies have stopped sending parts state side because of the epa being able to fine canadian suppliers
@gregbrowne99325 ай бұрын
Way the hell too much talking
@BanackIndustries5 ай бұрын
Don't like it, film your own video and stop watching mine 😘
@Bucking_Bronco5 ай бұрын
Hell Yeah Brother!!!!! The sounds of Liberty!!!!
@DChase-ky2pg5 ай бұрын
Sick set up. I have a 2015 and I'm looking for a nice set up like this. Strong work
@courtneycottingham14625 ай бұрын
I pulled mine out and won't recoil
@BanackIndustries5 ай бұрын
Definitely a broken spring, just buy a complete replacement and bolt on
@courtneycottingham14625 ай бұрын
Well I figured it out it recoils all way I let go of vice grips and now it don't seem to catch
@courtneycottingham14625 ай бұрын
Nevermind lol
@jasonschaeffer725 ай бұрын
My 17 f350 6.7 dually is deleted with everything still on my truck. I plug welded egr pipes to block them off and gutted the dpf ran a straight pipe inside and reinstalled. To inspect my truck visually it still has factory emissions intact. I call them my SNEAKY PIPES 😂😂. I did do a DPF back Banks exhaust and cold air intake also. I wasn't looking for a 1000 hp lol. I only wanted it to be really reliable and just just benefit from the add power of just being able to Breathe.
@BanackIndustries3 ай бұрын
Definitely a option doing it that way and has been done that way many times by different shops
@fckupayme9585Ай бұрын
Need a video lol
@justinb53045 ай бұрын
Nice rig ! Gotta 19 mbrp braap brap n cat delete. Good rig .... sell before mas problemas
@inversionesgoc.a.90195 ай бұрын
good morning I need your help How many gallons does the hydraulic box hold?
@BanackIndustries5 ай бұрын
4-5 pails
@jasonroot70615 ай бұрын
Keep the post comin this is bad ass
@arjilian22596 ай бұрын
bro just looks unreal love it. i just ordered same wheels in 24" thanks this video helped me a lot
@noeeon99106 ай бұрын
My F250 hits the bump stop HARD for any little bump on the driver side. I thought it was the shocks so I changed them out for ranchos and it dampened the blows abit. It's been like 10 months and it's back to hitting the frame hard. I hate it, I'm guessing it's the coils springs.
@BanackIndustries6 ай бұрын
I would have to agree with coils
@noeeon99106 ай бұрын
@@BanackIndustries thanks for replying! So I've been looking for new coil springs, any suggestions. I know it won't be as smooth as a Cadillac but something close would be nice. Also it's stock but everything I find seems to have a lift from 1.5" to 6" ..
@BanackIndustries6 ай бұрын
@noeeon9910 there is lots of people that have stock coils sitting around after lifting newer trucks, the coils are the same all the way 2005 - 2023, even go take to a local dealership they might have some sitting around or they tossed in the scrap bin
@noeeon99106 ай бұрын
@@BanackIndustries thanks for the advice! I like stock, I only modify where it counts.. the engine.
@lukezanella32206 ай бұрын
Thanks!
@billkenyonbk6 ай бұрын
Thanks for the video! Huge help
@iwannagofast36906 ай бұрын
Sweetness!
@colehaskell70846 ай бұрын
What a unit!
@holymoly37006 ай бұрын
Do you still have the 825 ?
@mattewald68626 ай бұрын
Thanks so much for this! Having the same issue with my ‘21! What is the other “small issue” unplugging that causes?