2 жыл бұрын
2 жыл бұрын
3 жыл бұрын
4 жыл бұрын
4 жыл бұрын
5 жыл бұрын
5 жыл бұрын
5 жыл бұрын
6 жыл бұрын
6 жыл бұрын
6 жыл бұрын
7 жыл бұрын
7 жыл бұрын
Пікірлер
@thundernaut9710 21 күн бұрын
Hey man, great video, a couple questions if you dont mind, I have a similar issue with my mars 4, it worked nicely for a year then started rebooting when the plate moved or in the first layer of the print, was it the same for you? did it worked previously then started rebooting? also, how do you "ground" the LCD plate? I appreciate your time.
@Kilohercas 21 күн бұрын
@@thundernaut9710 Here’s a revised version of your message with improved clarity and grammar: --- Hi @thundernaut9710, Just make sure that your build plate is grounded, as well as the metal frame holding the LCD. Mine was working fine, but when I unscrewed the LCD frame from the bottom, it started failing repeatedly!
@marquisW4292 2 ай бұрын
Thank You, just learned that two of my outlets are not grounded today.
@ZetaBling 2 ай бұрын
what is the wavelength resolution? what is the voltage and power requirements?
@Kilohercas 2 ай бұрын
@ZetaBling resolution depends on two factors, sensor sharpnes (lines per millimeter) and spot size. With this setup it is possible to see features around 10um or better. Think about spot size and sharpness of the shadow as well as distance to sensor. Wavelength or energy only gives ability to penetrate targer, this is not like optics.
@ZetaBling 2 ай бұрын
@ I see, I see x-ray flat panel sensors around 9k or more usd lol would those x-ray paper films work?
@Kilohercas 2 ай бұрын
@ZetaBling you can find it between 1000 to 10000. But at 10k, it just stupid to buy, and they will never going to sell it. I have around 5 sensors in my possession in various formats and frame rates
@niewiem7295 4 ай бұрын
Hi, how much and where did you buy the C9732DK-11?
@anishbhanushali 4 ай бұрын
Who else is here after the news of the remote attack ?
@adriandcunha2839 5 ай бұрын
Is it possible to change the low beam lamp. For some reason the low beam doesn't work on mine. Give me error in dash as well.
@Kilohercas 5 ай бұрын
@adriandcunha2839 is possible but very hard to do...
@adriandcunha2839 5 ай бұрын
@@Kilohercasoh really.. Any leads on what parts I need to use? The bulb I have is very low output.. More like a 1w bulb at the moment.
@Kilohercas 5 ай бұрын
@adriandcunha2839 I would bet it is osram SMD led. You would need to desolder it and search in digikey/mouser something similar. You can also place other type of led , but you need some skills for soldering
@CREEMkitty7 6 ай бұрын
The devil’s pillow
@vishnuak3513 6 ай бұрын
I need this
@vishnuak3513 6 ай бұрын
Hi
@sandeepthorvat6395 6 ай бұрын
hi sir can make reflow oven controller for me i will buy from you
@Kilohercas 6 ай бұрын
@@sandeepthorvat6395 go fo raspberry pi, you can have much better functionality!
@sandeepthorvat6395 6 ай бұрын
@@Kilohercas not to much use for my samm projects can me send communication contact batter
@efiron 6 ай бұрын
Hello! Can you provide a link to the project, if possible? I will be happy to read it in more detail.
@Kilohercas 6 ай бұрын
@@efiron community.element14.com/members-area/personalblogs/b/linas-karpavicius-s-blog/posts/homemade-high-resolution-x-ray-scanner
@efiron 6 ай бұрын
@@Kilohercas Thanks!
@sapemeg570 6 ай бұрын
Amazing! Keep it up!
@sergiygeorgiyev2950 6 ай бұрын
good afternoon, I have a problem with the Scale knob, it partially does not respond to speed, it resets to the beginning, sometimes with 500mls for 100 seconds what is responsible for this, where to look :) thank you very much
@jannatulnayeem7289 7 ай бұрын
I want to build one? Can you suggest me about the xray detector? I was looking for it but could not find any sensor or detector.
@Kilohercas 7 ай бұрын
@jannatulnayeem7289 They are expensive and rare. Try varex on ebay, but they can cost >5k$
@jannatulnayeem7289 7 ай бұрын
@@Kilohercas thank you for replying. Actually I need the scanner to develop a product for my customer. It would be better if I could get it more cheaper. Is there any way to contact you? Could not find any email or Instagram.
@Kilohercas 7 ай бұрын
@@jannatulnayeem7289 my ig is kilohercas
@rashidak7821 7 ай бұрын
View 2024🤣
@emanuelepatriarca5981 7 ай бұрын
hey, could you describe the solution in simple words? I didn't get what I should do 😅
@Kilohercas 7 ай бұрын
Ground your printer top plate, where LCD is. You must use power supply that does pass 0V to ground, or do it yourself.
@SALAH_SOFT 8 ай бұрын
☣️ warning
@rogerio.fialho 8 ай бұрын
I have a similiar problem with my Mars 3. Here when I move the plate even kust 0,1mm it turn off and the blue light in the battery blinks on and off. Do you think its the same issue?
@Kilohercas 8 ай бұрын
It could. Simply ground top of the lcd plate, thats it.
@ThaGodfathar 3 ай бұрын
Any Chance you could provide images?
@digitalmente01 8 ай бұрын
I believe i have the same issues with my mars 3. Thank you very much for this guide
@rogerio.fialho 8 ай бұрын
Was your problem the same as the video or similar? Did you fix it?
@nn_oel6751 9 ай бұрын
Great project! Where did you get the sensor and how much did it cost?
@billyd78 10 ай бұрын
Hi Linas K, you have comments turned off on your elegoo saturn fix and I have a question about it. Many people are reporting that they solved the problem of restarting by replacing the power supply. Did your chassis ground solution remain effective? I am having this issue now after years of use, so it's hard to believe that I am suddenly getting static build up after all this time. It has never changed location and it's in a temperature controlled room. I have ordered a new power supply, but maybe I will take the time to ground the chassis as well.
@Kilohercas 10 ай бұрын
As stated in that video, unscrewing top made it non functional due to restart. It help alot having true ground ( must be in the socket) Good power supply could have proper ground to zero connection
@billyd78 10 ай бұрын
@@Kilohercas Well my new power supply didn't fix it. So I grounded the chassis to the USB board. Actually found a ground pin on that board and used a female connector to connect to the pin. I felt I would have had to completely remove that board to solder to usb ground which was a tight fit to the base and didn't think my soldering tip could fit in there. Then I ran that wire to the chassis, scraped away the paint and soldered it right to the chassis. Printer is working again, thanks for the video. Really odd how this just started happening after years of printing without this issue one time!
@danacarter9147 10 ай бұрын
Amazing!!
@VovelPunch 10 ай бұрын
awesome!
@en2oh 10 ай бұрын
One of the problems with CID sensor panes is finding software to interface it with your computer. Dental sensors (small bur readily available used) can be fairly cheap on eBay
@Kilohercas 10 ай бұрын
This is hamamatsu. They have examples for nearly all languages ,vb,c#,c. Made my own program.
@googlefuuplayad9055 10 ай бұрын
Nice build 👍👍🐈🐾🐾
@en2oh 10 ай бұрын
Where did you find the imaging drivers and software for the sensor?
@Niuxas15 10 ай бұрын
Is there a fan inside ?
@Kilohercas 10 ай бұрын
No
@Niuxas15 10 ай бұрын
How to remove clear lens at the front ?
@markae0 11 ай бұрын
Is it a single shot, or continues beam? put a mouse n there? Looks like two seconds if the red LED indicates the Xray beam
@Kilohercas 11 ай бұрын
Yes, it is constant 2s integration per frame
@nolanmoser7776 Жыл бұрын
this saved me 20 bucks, i personally think you should continue these types of videos with more teardowns to help reveal more false batteries you just saved me a lot of time, effort and money thank you.
@zbubby1202 Жыл бұрын
I have a similar setup but I have to use film currently, I couldn't find one of the sensor plates you did without it being thousands of dollars. May I ask where found that? Also what tube do you have? I have a Canon D-045
@nebxonexicron Жыл бұрын
mmm, hot pockets!
@Xenu321 Жыл бұрын
Bro at the least step 2 meters away. Even if it might not be that much coming through the lead, it makes me unconformable seeing someone x-ray something next to their testis.
@Kilohercas Жыл бұрын
With same dose you should not fly at all. this is soft x-ray. it can barely pass fraught copper foil. Relax, this is just 39keV
@Xenu321 Жыл бұрын
@@Kilohercas yes I agree, this is why there are limits for flight personal on how many flights they can do per year. I just wanted to say that if he stepped 2m away he would only get about 10% of the dose he gets when he is standing right next to it. With basically no effort (only having a 2m cable). Yes the risk of him getting a relevant dose is pretty small but he could make it so much saver just by having a little distance
@markae0 11 ай бұрын
I don't think it is continuous.
@brainprism88 Жыл бұрын
what is the panel detector?
@Kilohercas Жыл бұрын
It's from hamamatsu. Does not look to be listed on the website anymore
@Kilohercas Жыл бұрын
kzbin.info/www/bejne/fZi5oYWVp696i9k
@geronimoolvera9793 Жыл бұрын
Thank you very much! It worked also for my 2020 R1250GS. Helped me a lot!
@HoneySoakedSeagull Жыл бұрын
This video inspired me to work on building my own PCB xray inspection cabinet several months ago. I've had a lot of issues but am nearing the end, I'm wondering what panel you use though? I've gotten 2 samsung llx240ab01 but don't have any of the software or cables. I can mock up cables just fine but it's that software I'm struggling with now.
@Kilohercas Жыл бұрын
Try to get hamamastu panel. It has sdk with examples how to use it. It will be hard to do in other panels, specially big TFT tipe ones, you need special programs and no SDK.....
@theworldlab2529 Жыл бұрын
Wow calculator display can be stopped the x ray
@KallePihlajasaari 10 ай бұрын
Many layers including aluminisation for reflector and tin oxide for transparent conductor With more xRay energy it will be able to see through.
@cloud.0sharon-teinasagent326 Жыл бұрын
Fk I just punctured 1 and fire came out of the Crack i threw it out the window & smoke bellowed out of it & it came inside so I quickly closed the window daam I thought I was gonna die thinking the smoke was Poisoning me where I stood fk! 😢 but I'm OK so far my cat freaked too damb the public should have been informed about this Hazzard why weren't they 😮 why wasn't I told too daam that's really fkn dangerous! Why? Don't ever stab your phone that's for sure. Or puncture it like I did wedging it with a knife coz I was trying to tk the battery out so this old broken A20 galaxy phone wouldn't play the alarms in the bin
@Graeme_Lastname Жыл бұрын
Well done! 😀👍
@enrgz Жыл бұрын
Your design, or did you follow someone's else's plans? Saying because a portable hand model to take into the field would be very useful.
@AB-yu2tj Жыл бұрын
Wow. Thank you for showing. How, where, how.much did you acquire cmos sensor? Please
@shinn-tyanwu4155 Жыл бұрын
Excellent 😊
@among-us-99999 Жыл бұрын
God damn that’s cool, looks like a computer animation but I know it’s not. can you do comparisons with different voltages?
@allesprobieren Жыл бұрын
Hey! For what price would you build something like that?
@Kilohercas Жыл бұрын
Hard to tell, >3k
@allesprobieren Жыл бұрын
@@Kilohercas wow, this would be a bit over my budget. 2800€ is my limit. Is that doable?
@Kilohercas Жыл бұрын
@@allesprobieren yourself, yes, it is.
@tylnaex9179 Жыл бұрын
My drone battery cant do it... I have the mavic pro. Can you explain me how you do it??
@Kilohercas Жыл бұрын
Open space with a clear line of sight
@ubersosiska Жыл бұрын
is there any chance to extract high beam signal from the headlight internals, maybe directly from high beam LED? I`m willing to connect external lights to high beam, but struggling to get signal from the system. Any advice maybe?
@Kilohercas Жыл бұрын
Use canbus, and microcontroller. Mask all unused messages and with single if command can turn something on or off :) You can get canbus from DWA connector near rear light. You musu terminate it with 120 Ohms
@ubersosiska Жыл бұрын
@@Kilohercas wow, thanks for the advice!
@bagoessatrio1267 Жыл бұрын
@@ubersosiskado you manage to get the high beam signal?
@ubersosiska Жыл бұрын
@@bagoessatrio1267yep. by buying special device that does it for me ) some sort of canbus scanner.
@amajout Жыл бұрын
Hi! I'm curious about the carbon fiber, It's a conductive material so it would act like a shield as far as I know so why put it over the sensor itself?
@Kilohercas Жыл бұрын
Mass is a shield for this type of radiation. And carbon fiber is very light
@TechNick1414 Жыл бұрын
This is very cool! Great job! Do you mind sharing a few things like, where you got the xray tube from or part number? Or the sensors you used? I would love to be able to build something similar so I can check some of my soldering work while I learn on smaller packages lol.
@ГерманМаслиевич Жыл бұрын
Nand or emmc don't say "thanks" for you(xray)
@Kilohercas Жыл бұрын
Energy is too low to flip a bit
@nerddub Жыл бұрын
Like others, Id love to see a full project video on this, this is amazing!
@hullinstruments Жыл бұрын
I hope so