Wow this is exactly what I was looking. Getting wood delivered today. What size nail were you using? Would 3" be too long? I didn't see where anything more than the 2x6x6 were used. Did I miss that? Thank you very much!
@CoffeeDrinker201015 күн бұрын
"never had a problem nailing the bejeezus out of it" :)
@wer1984bird16 күн бұрын
Glad to see your saw does the same as mine. Good looking ramp
@zimm1gre17 күн бұрын
This works so well because the ground at the bottom of his ramp is level with his shed floor. If the ground was not level at the base of the ramp you will have to spend time making it level. Otherwise great video.
@johnwells715522 күн бұрын
Awesome man. You just gave me the confidence boost that I needed to do this on my own!
@moconno124 күн бұрын
Thank you. Excellent how to👍
@KatrinaWhitlock-i6u24 күн бұрын
You made that look so easy
@jimmyplank6924Ай бұрын
great video. any chance you do one for some steps for shed as well? thanks
@jfc650Ай бұрын
Washed several videos about hot to build the ramp. Your the best !👍👍
@shootsnscores-cjaАй бұрын
Used this video to help me build a new ramp for my elderly mother-in-law and it turned out great. Thanks for the great instructional video.
@agodwin2011Ай бұрын
Great video what type nail gun did you use and size of nails. I got to build one on my building.. Thanks
@deandresparks5444Ай бұрын
"Absolutely Amazing" I just purchased a shed today & started searching to purchase a ramp. This video popped up & now I'm waiting in anticipation for my shed delivery & building this ramp!!! 👍🏾🪚🔨👍🏾
@momtaxi18Ай бұрын
How would I measure to seal of the sides? Please post a video
@momtaxi18Ай бұрын
@robertpowell7073
@eddieperez180Ай бұрын
Can someone break down material list better. ?
@DemePoole2 ай бұрын
To this day, he is still checking the fit.
@reviewerm75662 ай бұрын
This is the best tutorial!
@stevefogle60272 ай бұрын
Excellent job explaining how to make the angle of the ramp. You save me from ruining a lot of boards. Thanks! God bless...
2 ай бұрын
What did you use the 2x6x12 and 2x6x8 for on your material list?
@Krish_Nathan2 ай бұрын
Just brilliant.thank you, especially for explaining how to work out the angles. Warm regards.
@DiannaAtherton3 ай бұрын
Straight and to the point. Your instructions made me a really nice and sturdy ramp for my new rider mower.
@Mark197663 ай бұрын
What if the ground doesn’t level out in front of the shed say it’s 6 inches or 8 inches higher on one side than the other? Would this method still work by scribing the bottom line with a template of a scrap piece of wood?
@Toasty_Woasty2 ай бұрын
You would want to level out the ground by digging and/or filling. One you have a level surface you can use rocks to help water drain.
@tlanc12833 ай бұрын
Could this be done with 2x4s for header and 5 2x4 joists as well and still be strong enough for same type riding mower?
@69Sirchuck3 ай бұрын
This video makes the most sense to me. Just bought all my wood and about to get to it. Thank you for sharing!
@gsquaredmke3 ай бұрын
Using this easy tutorial this weekend to build my shed ramp. Where did you get the diamond plate threshold guard?
@momtaxi182 ай бұрын
What is the that?
@gsquaredmke2 ай бұрын
@@momtaxi18 it's the piece of metal at the top of the ramp that protects the wood shed floor when you are moving things in and out of the shed, or driving a lawnmower up the ramp.
@user-ob7rj2zy2g3 ай бұрын
Or you could it right and screw down the decking... Not as cool as a nail gun
@tttlllccctttlllccc47233 ай бұрын
This is by far the best video on how to do this. Thank you
@codybear933 ай бұрын
Thank you!! Great video
@justtisha3 ай бұрын
Best video on how to build a ramp! What kind of nails did he use?
@michaelsa8923 ай бұрын
Wow you made that look so easy
@MyronNoland3 ай бұрын
This guy attacks the job with authority. He knows what to do and does it. No scratching his head or fiddle fartin around.
@mattp99323 ай бұрын
Great. Ty. This is the best how to video on KZbin. No bs talking for ten minutes. Throw things around. Works perfect. You are a good man
@user-ov5kx7ki4v4 ай бұрын
thanks for sharing. Made the angle calculation easy peasy
@willbuffaloe65944 ай бұрын
Good video. I like the straight forward, simple approach. No need to go crazy calculations and figures with this method and works great! I installed a ramp on my shed yesterday and it went very smoothly and is solid as a rock! Thanks for the video.
@thomaskrahling99794 ай бұрын
We followed this video and we were able to replace our shed ramp with a new one. It was perfect. Thanks for posting this video.
@manningoutten44944 ай бұрын
that's simple and efficient as well nice job
@CriticalDynamicsSTG5 ай бұрын
What angle and size framing nails are you using?
@shadricosuave5 ай бұрын
Best shed ramp video I've seen. Everyone else's are good as well but they are overkill and overbuilt. I needed something quick like this that will last a while. Only change I'd make is pressure treated wood and maybe one more joist. But this is going to last a long time and the scribe concept was great
@STSwhisperer5 ай бұрын
Nice video. Then someone drives up the ramp with flip flops on. Lol!
@kurtcostanzo89265 ай бұрын
Awesome video! Was able to get my ramp on the same exact building knocked out quick! Thanks so much!
@TishaRicks5 ай бұрын
I am sending you a VURTUAL HUUUUUG! 🤗🤗 Thanks so much for sharing this video. You were very clear on what to do and made it look sooooo easy. After watching this video, I AM EXTREMELY CONFIDENT IN KNOWING THAT I CAN BUILD MY OWN GARAGE SHED RAMP. Thanks again!
@mattmcshane20795 ай бұрын
By far the best shed ramp video on you-tube ! 🏆🏆🏆🏆🏆🏆🏆🏆🏆🏆🏆🏆🏆🏆🏆🏆
@yellow72335 ай бұрын
This is the best video on KZbin for building a ramp. Thanks to you and your quick & to the point video, I was able to build my ramp today!
@user-lx6jt5qs8i6 ай бұрын
good job!! Thanks!!👍🙂
@madlion84356 ай бұрын
By far the simplest and best video I've seen on how I should build my ramp for my shed. Straight to the point and you broke it down very nicely.
@captainedc6 ай бұрын
Nice but I believe your usually better off having a FREE STANDING ramp you can move if needed for several reasons. One is if you need to work on it or do landscaping around it. The other is it cannot eventually fail and you and your tractor go flying.
@montehyler7 ай бұрын
Great video! One question: How did you know how long to make the stringers before you marked out for the angle cuts? Thanks!
@robertpowell70736 ай бұрын
Six feet is just the standard we use. Actually it can be a challenge to know how long your ramp needs to be. If you think it might be too steep, it probably will be.
@kevingeorge10597 ай бұрын
Where did you get your metal piece to protect your floor edge?
@fivepointslo88937 ай бұрын
Question. And maybe a dumb one. But did you just use standard woods screws or deck screws to secure the ledger board to the shed? And how long? Thank you.
@carolinayardbarns26127 ай бұрын
It is attached with 3" galvanized framing nails, and a lot of them.
@fivepointslo88937 ай бұрын
@@carolinayardbarns2612 thank you so much. One more question. How much mating surface do you think is needed for the ledger to the joist? I believe my door hangs a little lower than the one in your video. Thank you.
@fivepointslo88937 ай бұрын
@carolinayardbarns2612 sorry last one. My yard has a slight slope.left to right. Do you think I would be fine cutting each stringer and the appropriate angle to match the slope, or should I dig the ground and level it. Thanks again
@travelingfacelessoldlady11058 ай бұрын
Love your way compared to the other videos. But my door hangs lower n I have to cut off the bottom of my door I don’t see any other way ????!
@carolinayardbarns26128 ай бұрын
We have had to do that before as well
@kentshrader66168 ай бұрын
Viewed several KZbin videos on building one of these ramps. You have made it so simple. Thanks, especially, for showing a simple way of determining the angles!!