The Handy Neighbor

Пікірлер

@JM.TheComposer 2 күн бұрын

This video is confusing penetrating stains vs. film-forming stains. It is the film-forming products that peel off and look terrible. Both water and oil-based stains can be penetrating or film forming. It depends on the technology and formulation of the specific product.

@TheHandyNeighbor 2 күн бұрын

Anyway you got the point, oil will last longer.

@JM.TheComposer 2 күн бұрын

@@TheHandyNeighbor Depends on the product. Have you heard of Sansin water-based penetrating stain from Québec? The new water-based tech is not well known because our American neighbours don't often see this product.

@TheHandyNeighbor 2 күн бұрын

@@JM.TheComposer Hm..not sure I ever saw that. But thanks. In the video I was focusing on regular paint store supply stuff.

@DirtComplex 2 күн бұрын

On the ends of the deck boards where there is no joist or blocking, what did you screw into? Are they just floating our did you screw into the picture frame border?

@GregGillis2 2 күн бұрын

Great instructional video! I worked in the flooring industry for a few years, and I have seen installers trying to rush the job and lay glue down vinyl improperly, only to have to scrape it all up and start again. Well done.

@TheHandyNeighbor 2 күн бұрын

Thank you very much, that means a lot! 🙏 Please like and subscribe!

@bl9531 Күн бұрын

I had glue down vinyl flooring in my house 10 years ago. Best flooring for basements by far. I will be installing myself this time in my son’ basement so your video was very useful indeed. I have liked and subscribed … thx for posting

@1GR8Mimi 2 күн бұрын

Why are you using brackets instead of screwing them to the fence?

@TheHandyNeighbor 2 күн бұрын

Just because that was original desing client wanted me to follow. But you are right, attaching it directly on the face of the post is much better. Thank you 🙏 Please like and subscribe!

@samuelrogers4480 2 күн бұрын

What does it look like now ?

@Humanoid_Ty 2 күн бұрын

Can you lay this type of flooring over plywood?

@TheHandyNeighbor 2 күн бұрын

Yes you can, I did it at the landing/entrance where it is all playwood subfloor. Please like and subscribe! Thanks!

@DREAMVIZON8 5 күн бұрын

seems like you have the nicer side of the fence showing on the inside ? you have the rails facing the outside? great video by the way

@brettlizotte1216 8 күн бұрын

For the vertical 2x4s, did you cut them to the 68" measurement or did you account for the horizontal 2x4 width?

@WhitakerDeadman 9 күн бұрын

Could you show how to add transition strips ?

@TheHandyNeighbor 9 күн бұрын

Take a look of my otger video Click vs Glue down you will see I did not add transition strip but I went all the way. Thanks Pease like and subscribe!

@WhitakerDeadman 9 күн бұрын

@@TheHandyNeighborcorrect, I was just seeing if you could teach us how to.

@LA-gf9us 13 күн бұрын

Im trying to decide what to do with my basement floor after pulling up 30 year old carpet. Everyone tells me different things because I’m shopping without a guy. This has finally described exactly what to do. Perfect thanks for being a big brother!!!

@TheHandyNeighbor 13 күн бұрын

Thank you for the feedback! Very nice!

@pawneep20 15 күн бұрын

Can you use pebble paver leveling sand underneath the paver?

@peteverrelli5797 17 күн бұрын

No knee pads! Your one tough guy. 😜

@vishalvavle1291 19 күн бұрын

Hi, could you please tell what type of deck board did you use? I am in the process of starting my project next week. I am debating to use Douglas fir for deck boards... :D

@TheHandyNeighbor 19 күн бұрын

I used 2*6 but normaly you should use 5/4*6 pressure treated!

@vishalvavle1291 16 күн бұрын

@@TheHandyNeighbor Thank you.

@anthonydavid1965 19 күн бұрын

Hello.Excellent video👏. Could I please ask if it is possible to lay glue down flooring over existing vinyl tiles? Thanks if you can answer👍

@TheHandyNeighbor 19 күн бұрын

Yes you can. I am planning to do that in my next commercial project. This glue is very sticky. Please like and susbcribe! Thanks!

@anthonydavid1965 19 күн бұрын

@@TheHandyNeighborThank you👍

@CarlosBookerPhoto 20 күн бұрын

Rough 😂

@bwoodworth100 21 күн бұрын

I understood that you marked 2.5 inches up for your bottom rail (to follow the terrain), and then you said to mark 67.5 inches up from that for your top rail. I then saw you use your level. Are you then ignoring the 67.5 mark you made and just making it level instead on the subsequent top rails (after establishing the first section). Also, is your middle rail marked so the top of the 2x4 hits the mark, or the bottom of the 2x4 hitting the mark/measurement. Great video by the way. I appreciate you. 🙏🏾

@DJShaunLouis 21 күн бұрын

Great video!

@powerstroke1914 24 күн бұрын

What do you think a job like that would roughly cost

@TheHandyNeighbor 22 күн бұрын

3000$ probably for the small house like this.

@powerstroke1914 21 күн бұрын

@TheHandyNeighbor ok thank you, definitely gives me an idea now.

@DanielleP12112 29 күн бұрын

How long does the glue remain tacky for you to work with after it’s spread?

@TheHandyNeighbor 28 күн бұрын

It does not completly dry at all.

@Nikki_Nicole850 Ай бұрын

Hi. What about over previous peel and stick??

@nothingsimpostleble1593 Ай бұрын

So idk man, ive been a professional painter for close to 15 years...wash the flippin soffits that doesnt make sense to not wash... Hack move... i always use a bonding primer(extreme bonding primer) just do a light "piss" coat over all the vinyl before spraying finish BECAUSE its not about warping... i havent ever dealt with that... its bubbling a year or 2 or 3 later... Adhesion problems... And if your going to be a painter, look professional...wear white... you look like the typical hack handyman painter... "Oh im using Super Paint" Its not that great of a product man

@faithprice8584 16 күн бұрын

What brand extreme primer do you use?

@TheHandyNeighbor 16 күн бұрын

You don’t need any primer. Don’t listen to this guy. This is exterior paint and it will bond for vinyl and anything very well. Just wash it well and use exterior paint. Super paint from Sherwin Williams is good paint but you can go with any brand you want. More money-better product.

@nothingsimpostleble1593 16 күн бұрын

@faithprice8584 its called "Extreme Bonding primer" by Sherwin Williams. I always do a light mist coat across the whole house. That's what my paint rep told me to do, doesn't matter if you use Super Paint, Duration, or Emerald... I'm telling you this from my own personal experience. YT has brought out all these hacks on YT trying to give up what they think are trade secrets.. I'm also a licensed paint contractor that has been in business for almost 5 years. I bet this dude in the video isn't even licensed.. The bubbling is a real thing, it's not going to happen ALL OVER but it some places and this guy will get a call back. Plus think about it, what's the hurt in spending an hundred bucks on a couple of gallons of primer to ensure you won't have issues later?

@franbones Ай бұрын

Could you install over osb? I live in a 2 story home

@janetevans2711 Ай бұрын

Great video

@RandomVids519 Ай бұрын

Nice job

@webininstitute8230 Ай бұрын

Invaluable video! Thanks!

@kylere795 Ай бұрын

Personally, I hate the dull hollow sound of feet pattering over click vinyl flooring

@Dr.Yalex. Ай бұрын

10:55 why put the painted side against the ceiling? Would it not be easier to put the turquoise side outward? I don’t mind if my garage was all turquoise😂😂 I guess nowadays they have all different colors already applied to the panels ❤❤❤ thank you very much for the tutorial❤❤❤

@TheHandyNeighbor Ай бұрын

I did not like green 😀

@Dr.Yalex. Ай бұрын

@@TheHandyNeighbor 🤔 isn’t turquoise a blue color? ❤️ IMHO and FYI - the “green” side is already prepared to be painted white or any other color, the other side is raw and absorbs/eats paint

@tomwelder1841 Ай бұрын

I'm surprised you didn't show making the end seams of each plank offset.

@TheHandyNeighbor Ай бұрын

It is hard to record every single thing while trying to get the job done in clients home. That is why.

@jc1400 Ай бұрын

i just finished a room with glue down. the floor is unlevel. I'd have to completely refinish the floor with leveler to get it level. The glue down molds to the floor and works great.

@TheHandyNeighbor Ай бұрын

Thank you for the feedback!

@Paulmasonism Ай бұрын

Very professional and wonderfully clear. Thank you.

@TheHandyNeighbor Ай бұрын

Thank you! Please like and subscribe!

@UsPlusrss Ай бұрын

What type of wood post -material did you use...

@TerrieSingleton-b3f Ай бұрын

Great Job!👍

@chefiancarl8127 Ай бұрын

What is the name of the adhesive you were talking about that remains sticky even if you have to replace a piece?

@TheHandyNeighbor Ай бұрын

Roberts 2330 Home Depot I was using. Or Mapei 373

@chefiancarl8127 Ай бұрын

@@TheHandyNeighbor thank you

@chefiancarl8127 Ай бұрын

@@TheHandyNeighbor could it be used on click in plank? I was reading that I could be glued down also

@span3631 Ай бұрын

Why not less than 16” centers?🤷🏻‍♂️

@TheHandyNeighbor Ай бұрын

You can do less, keep in mind you need to leave the room to access with the drill to install somw blockings.

@span3631 Ай бұрын

Or a palm nailer🤷🏻‍♂️

@houlalover1 Ай бұрын

I made the mistake of using faced R13 with 6mil ply sheeting in my bathroom and kitchen and now I think I'm going to have to tear it out bcuz everyone says in a hot climate like I'm in all year long that I shouldn't have done that. Thoughts?

@houlalover1 Ай бұрын

*Poly not ply

@houlalover1 Ай бұрын

But not in hot humid climates.

@user-lh8ir6kq1v Ай бұрын

Or you could just put a 4 x 4 metal cap over the edge they come in pointed and other and you don’t have to do that

@mikeleonard2800 Ай бұрын

You're NOT supposed to paint a darker color over the lighter color, or your siding will warp!!!!!

@TheHandyNeighbor Ай бұрын

No it will not, look at the entire video before you crititize. Vinyl Safe Pain bud.

@buckeyeswon7 21 күн бұрын

He talked about that in the beginning on the video, the paint manufacturers guaranteed the siding wouldn’t warp.

@christopheraduran3097 20 күн бұрын

If its made in a vinyl safe formula it should be fine

@fabio.1 Ай бұрын

Excellent, with the tape part included.

@pedrochip Ай бұрын

Silicone doesn't stick to vinyl tubs it will peel in no time

@TheHandyNeighbor Ай бұрын

Silicone sticks to anything. It will not peal. Look at the old one that I removed - it did not peal, only got dirty and moldy.

@dwarfnessog5700 Ай бұрын

Why do people use so much tape now? Can nobody make a smooth line and flush it with their finger anymore?

@jacobdancer2615 Ай бұрын

That tape is a little unnecessary if you know what you’re doing don’t ya think?

@mantasr Ай бұрын

I don't think people who know what they're doing are watching this on KZbin shorts. But it's great for beginners like me.

@RicardoSanchez-fl4om Ай бұрын

You don’t gotta worry about accidentally getting off track and causing even more problems trying to save your self cents in tape and seconds in time. I’m sure he’s good enough to do it without it and he’s messed up 1 time out of 100 times of doing it good. Not worth it being wrong even just 1/100. Better to be right 100 percent of time taking couple seconds to do this