Muchas Gracias

I found this tutorial, which seems to be much more complete and worked for me kzbin.info/www/bejne/jICuYZaQh7Gfl6s

Nice simple explanation, but following these directions exactly, my decal doesn't appear on the selected face after excepting the decal. My guess is that there's an important step missing here, that being, that decals can't be a JPEG or other image file, but must first be created and converted to a p2d file before being added?

سلام بسیارعالی(very good)❤️❤️❤️❤️❤️

An easier method might be to create an empty 3D sketch and convert the line entities and make path. You can then dimension the path using "Path length dimension" and reference this instead.

Hi, how can make multi-layer winding with wire? For example, there is 5-layer winding which has inner diameter is 20mm and wire diameter is 5mm.

Why my decals are blacked?

Hi, Why did you choose plastic as the material for the thermal wire ( coil cord )?

Great 👍

some observations: The bracket in equations are not needed.. the L1,L2 equations are not needed you can make the equation to the flat dimensions just by double clicking the bend model and select a dimension from the model. And add a k-factor to the bend length and you get more precise flat view of the model (take the angle of the bend in the equation of the subtraction formula).

after this step when i try to do a circular patterm, how to do get the further away parts to come closer to each other but still not have the inner parts overlap ?

It is a wondwonderful lesson, thank you very much 💙

Thanks for the Video, Great work flow

Hello I Add an image to decals but when I want to save from decals my image disappears. Please can you help to solve this problem? Thank you

Great

Fantastic

سلام ایرانی هستین ؟

If you just mirrored the hole features around the right plate, your u might achieve this also?

I use weldments, which I then use to make a weldment cut-list table with cut lengths and angles. To achieve this same effect, I make a non-derived configuration with basically the same principal as you've demonstrated for the length calculation. I then tell the cultist table to calculate based on the flat configuration. If you use derived configurations this doesn't work. The only thing is, this doesn't exactly work for giving the cut angles of the flattened piece stock, so you have to do that manually.

Can you ise the same process Even if you have different radius? Can you work with a stp file with your process?

But you would still need to take into account the k factor of the tube . As the tubes centre line will stretch or Shrink depending on the type of tube and the tooling . So the more bends the more it will run out . You need to do a test bend to find the percentage in each degree of turn .

مرسی

This is as good as adding dimensions manually if you're dealing with a lot of cable sweeps or routed tubes. Pretty useless.

SO NICE

Best tube video ever!!! It Is perfect but a lot of work...!! 👍🏻👍🏻👍🏻

Can i know why i cant press the vary sketch button?

Sir Make more videos for Solidworks 🙏

Perfect 👍

Share your ideas in comments 🌸