Still got her? How’s it running?

My son’s ttr 90 seems to have a tight shifter. I can change gears on it but he’s 11 and says it’s to hard to shift up. I have adjust the clutch screw and bolt but he says still too hard. Any idea how to get it a little less tight/hard? TIA

Nice work!! I'm planning on doing a frame swap on 2011 Yamaha Grizzly 550. Couldn't find a used frame, so I went with an OEM frame, $855.00 Wish me luck! Any suggestions or things you might do different a 2nd time around?

could it be any more blurred and farther away?

I really wanted to see that 66 Chevelle run from the intro

Just replaced the one way bering on my primary clutch and now when I depress the kickstarter only the secondary clutch boss spins and nothing else. Has new friction plates and metal plates. Can't figure it out for the life of me. Any ideas?

You have the eBay link? Or direction on where I can buy one? I can’t find the sprag gear anywhere.

I didn't know that many mustangs could turn right without one spinning out. Cop running the red light, because he wasn't paying attention, was the cherry on top...

Surprisingly... no spectators, trees or signs were harmed😂

Волга??? ..

Did you find a solution to the shift codes and neutral and shift indicators, or do you just live with it as is?

Mine just did this today. Now I have to replace the whole harness.

Mine just did this today. Now I have to replace the whole harness.

You say what to do but not how to do it Thats kind of lame ! Not much help

I thought I heard you say you were going to update with your purchase price and sell price? Thanks

Check that power wire going to the fuel shutoff at the bottom of the carb. Mine was pinched

how many turn do your turn the air to fuel screw for it to be right ?

Mine did the same thing ! it melted the fuse holder till it shorted and I had to cut the battery cable to stop the flow of power This is the second time it has had a electrical issue quit charging last season 2 shops worked on it they found a pin burned in that plug by the engine so this could be what is wrong with mine going to the builder about this !!

Thanks for that video

It lives

Clutch bolt torque specs ? Please

Underrated video 😂

thanks.

Guitar strings work great for jets.

Great video! The float retainer pin is directional, there is a small arrow on one side showing direction for removal, on the post where the pin slides into.

Glad we could help with the parts!

I have a 2020 Yamaha Special Edition that will not start. I think it's the fuel pump because I can't hear the fuel pump priming. All I hear is a couple of clicking noises. I'm pretty disappointed in my machine so far. Normally Yamaha's are bullet proof. I bought a 2001 400 Kodiak and sold it to my brother. It's still running strong. Then I bought a 2011 450 Grizzly and gave it to my other brother, who rides it everyday with no issues. So, I bought myself a 2020 Special Edition fuel injected ATV and it had fuel issues over the summer. It won't start until after it cooled down. Now I think my fuel pump went out. My question is, Are fuel injected ATVs really worth it? I was very happy with my carbureted ATVs.

I am trying to find an airbox for mine but them damn things are soo rare

Please help me out with and let me know

Hey i just buying one for my little boy but have the same problem with the kick start yuo tink if i jus works on the wiring in don't mess with the kick start yuo tink will running

Thank you I have a expolice 08 fjr with a overheated problem just striping the engine now . I will follow your guidance 🙏

I sold it. Sorry, how many wires are on it. We can maybe figure it out with a volt meter

If you still have it. Can you help me with a picture of key switch and pinout

What are you torque the bolts for the clutch springs?

I know it's been quite some time. But I was wondering if you know how to correctly put the primary clutch in peice by peice. And how to put that kick start in

So how did you figure the oil pump was bad? I don’t see a oil pressure check screw like the warrior quad has

In the beginning, you mention having an electrical issue ( The way you said it sounded like you hadn't found it yet) when you first turned the key on. If the electrical issue is That sometimes you turn the key on but you have no power, And you can't do anything with it I've had the same or similar problem. After years of trying to figure it out, I finally found out that it's a faulty key switch. My kodiak sat all winter unused Because I couldn't figure it out turns out a 15$ switch was the problem. Good luck

I am working on one and the kick starter won't return back up after you kick it, and when it is running the kick starter just hangs limp at the bottom. Any idea what is going on?

Soo... ttr newbe here but mechanically inclined, got a ttr90, the back wheel will turn going backwards but everything will lock up when you try to roll forward. Clutch and all will turn in reverse, but if you try to kick it, it seems like it's locked up. Thoughts???

200th subscriber !!

I agree with you 100% I ended up.selling it for $2850. New ones are 4500 plus. But yes they hold there value pretty well. Anything street legal brings the $$$$

I still want to know how everyone seems to think they should get as much for a used TW as a new one. Damn, people.

Great video, nice to know ✌️

When they replace my fuel pump in my 2018 kodiak 450, Is the new replaced fuel pump called 'after market fuel pump? We ride deep into Payette ntl forest. i really hope my new machine will be dependable, once the fuel pump is changed. I wish i knew more people like you. thank you. i been charged $600 for as fuel pump. you paid $67. I really think i'm getting ripped off. am i? or is That what is normal for Dealerships that sell you an atv that has a fuel pump issue? Being a woman and dealing with people out charging me is flustrating and disappointing. You've braught me insight and i appreciate you.

i just purchased this machine used from Dennis Dillon Canyon Honda, In Nampa, Idaho. the fuel pump was the first to go out, the first time bi took it in mtns. I love the Wench in front on machine. it helped in towing me back to camp. It has taken over a week in the dealership to get the part to them. i am patient, yet, have to wait. i have to pay for 1 1/2 hrs labor to have them install it, too. they charged me $600 for the water pump. why so expensive? i originally paid just under $5 grand for it used. It's a great Atv. I'm a woman and my whole family has utvs, atvs, etc. Thanks for your videos.

I need to change that one way bearing on my ttr90 pissed me off 🤣🤣

I'm having a similar issue with a 21 Kodiak 450. How has the aftermarket pump held up so far?

Have you finished the fjr and how it turn out ??

My boys have a TTR90 and its been a great bike as we keep up with the maintenance, etc. I have noticed lately it is starting the slip (kick start). Nice to know what the issue is. I'll have to see if this is something I can tackle on my own. Thx for the video. Love your shop friend too on the floor as you work! If it was me, you have yourself a great bike fixed up now and would keep it. It's hard to find these smaller kid bikes not thoroughly trashed with little or no maintenance on them. I think you said you paid $200 plus your $600 you put into it, you still can't find a bike with all the new parts and work you have done to it for $800. You know what you have done to it and you are good for several years to come but I digress. We same graphics as we have on ours too. Enjoy the bike!

Thank u