Thanks ordered part I did it myself thanks to your video. Saved $485.00 on a wood be service charge plus 200$ to wal in door charge. I finally paid $69.75 by ordering part on Amazon and doing myself. Thanks again. Great video.

Where did you get the diagram for the remote start? I got the Compustar system but it never came with a diagram.

Emergency brake engaged..

Is the sequence the same with a 2023 toyota corolla le?

Great video

Nice short video man. ? Where do I buy the part? Tk

good informative video and has given me the info that I needed to change my starter but how did you turn your engine to make sure you could see the third bolt through the hole. Incidentally what a stupid design by Ducati just to remove the starter.

Thank you!

Awesome video!! Just used this to help install the exact remote starter on my 1999 ram 1500 3.6L. I thought I’d give some helpful tips for others here for some of the things I ran into while installing. I could not get the steering wheel covers off, only the main foot cover. So when it came to figuring out which black/orange wire to use, it is the BIGGER in diameter wire. You can also just hook up 12V constant from the truck to both from the 8 pin on the remote starter (red and red/white). I had an issue where the truck would crank but would not start. The big BLUE wire on the truck was so thick that my connector failed to make a connection and for some reason also the black/orange wire. I had to manually cut back the insulation and solder it for a good connection. This install was incredibly simple for me as I have manual locks so I don’t need to wire them up. If you are installing this on another old car or the same and need the wiring diagram, go to internet archive and type in the website he mentioned, go back in time a couple years and you’ll be able to find the wiring diagrams for your vehicle. The issue is the website is no longer available. I hope this helps someone!

Do you remember what size socket it takes?

Would this sensor eventually stop the engine from turning over?

Great video, my Samsung machine WF42H5200AWA2 had the exact same problem. I bought an inverter circuit board like you did, about $65 and now the machine works again. Thanks for posting this video!

Thanks dude will do soon.

Thanks for the video. I replaced my downstream O2 sensor today and it was exactly what I needed!

So is the part called PBA?

Great video, in 1 minute you showed everything😂💪💪❤️

Just want to say thanks for posting. I followed you step for step and even ordered the part you posted in the description! Thanks for saving me some money!

Changed mine and still doesn't work haha

You are the man! Looks like a nightmare, I'm not looking forward to it!

Thank you 2025 and I got the part coming in the mail. Hopefully it’s the only issue. Everything happening here is happening to mine.

Where you get fuses

Where do the 3 hoses on the bottom drivers side of the radiator go to. Just replaced a radiator on 05 escape that hit a deer and need to where these hoses lead. Any help is appreciated

I wish you would show the whole process of putting it back on

Went to install a new starter and the bolt for the wire slaps against the block preventing me from mounting it flush.. it's the bolt too tall on the aftermarket or did I get the wrong part?

Its work for me thanks for vedio

Thanks for the information 🎉🎉🎉 now I can fix mine!!!

Do you know the size of the bolt I need to pop it out the drums ?

Where do you get that carpet thing on top of the dash?

Thank you! I love my truck. Changed air and cabin. Easy. I also wiped down all dust. Engine looks clean. Hope I get 400K miles on my 1500 Silver Beast! ❤

SO THANX FOR THE VIDEO IT WAS VERY DETAIL. SO I LOST TRACK HOW MANY TIMES YOU SAID “SO”…😳😩😩😁😁

silicone slide pin lube needed for top and bottom bolts next time...thx, good video

Thank you so much 😊 my washer works ❤❤❤

Does it need to be aligned after any of the struts are replaced??

Does it need to be aligned after any of the struts are replaced??

I had to take the old viper alarm out of my 97 van do you know how to get the diagram for factory wiring

They don’t build trucks like they used to and that’s for a profit reason.

Is it Denso Dox-0225?

thank you for you video , it help me alot 🔥🔥

I will never use click torque for small bolts ever again. Broke off a timing cover bolt, that was a nightmare. P.S. Your video is amazing. Thanks to you I can put the magnets in the correct place since the previous owner didn’t

Great video. Thanks a lot!

Will a door stay locked if this code is on

I love it when people reuse their old fluids All kinds of paid mechanics cringing at the thought I’m poor for the most part and I’ve been there 💪

Hahahah just walked outside give my door a kick from inside opened right up

I'm trying to do this on my car but I can't get the new belt on no matter how much I try to stretch and pull on it. Is there something I could be missing? Some trick to getting it on?

Where the instal belt part?

It should rotate freely? In park? In 2hi? Or is it not in park? Is the transfer case in Neutral? Im lost because I parked jacked it up and mine don’t spin freely. I’m in 2hi in park. I’m honestly lost…

Just picked up a 1999 5.9 Ram 1500 for almost nothing. This video helped me with my back door issue. Thank you.

What size tubing is that?

Shout out to you for helping me with this. Owe you a beer or 12 🎉

I got the same auto 4h 2