Пікірлер
@Oosik91 Күн бұрын
I just hear you in my left ear and hear all the music in both my ears..
@CruisinMiles Күн бұрын
Thanks for the input. I think a setting on my mic changed and I hadn’t caught it
@djcan9503 Күн бұрын
Can you share the type of lightbulbs you used for your headlights? Low and high beams? Thanks! Cool video
@ganbaatartuguldur6467 4 күн бұрын
which one do you like more for offroading? your 80 series or gx? i ask this question because i would like to buy a land cruiser 105 (like 80 series gasoline and manual) or gx460. They cost almost the same in my country. I live in Mongolia. Thank you very much
@CruisinMiles 3 күн бұрын
Oh I think the better off-roader overall is the 80 series for sure. A 105 is an amazing Land Cruiser. The GX has its advantages like modern amenities in the interior, and a nice powerful v8, but the 80 series is the more rugged between the 2.
@ganbaatartuguldur6467 3 күн бұрын
@@CruisinMiles thank you! i am going to buy the land cruiser 105 ( 2007 model 4500efi engine, manual transmision, one owner, only 100000km for 22000$)
@mohdridwansyah6690 5 күн бұрын
Front led use type bulb h7?
@cadoodle6522 7 күн бұрын
I think this is a great idea. I really want one. But I don’t think it’s a reasonable price point. If you are going to spend over $1000 why not buy a full bumper. This is just essentially a swing out not providing extra protection so I would think you should spend $1000 on a protected bumper vs this just provides a swing out. I was looking for something like this and really considering it but I just don’t agree with the 1k price point. I love the videos though, I am going to subscribe.
@Warpetrie 12 күн бұрын
Looks like a good competitor to Cascadia 4x4 and their solar pannels. Since it's been a few months since the video, how's it holding up? Has there been any updates to the app? What was the experience with customer service when you needed the replacement? I got a jackery recently so looking for ways to keep it topped off when on trips while powering my 12v fridge. Prices of the lensun is reasonable too so hopefully would be a good buy. I've heard not so great things on cascadia so fingers crossed lol
@CruisinMiles 10 күн бұрын
Great questions. This video is actually a follow up video to my original installation video. So I had that original panel for almost a year before the making of this one. Customer service is pretty good. All through email, I had never tried calling them. No updates to the app though. The app is my biggest gripe with this product. I mean the app works, but it can be sooooo much better. The new panel has been holding up great. No bubbling or discoloration like the first panel they sent me out. Like I said in the video, they had told me it was a QC issue they had and resolved. I have the exact plan for my jackery. Will use the panel to keep it topped off for my fridge.
@kevinnguyen8575 15 күн бұрын
My main question about this tank is that how are you able to tell how much is left in the tank? How are you monitoring the levels?
@CruisinMiles 14 күн бұрын
Currently I am not monitoring the levels. More or less guessing at the moment
@85_slorunner 15 күн бұрын
Sweet rig man
@CruisinMiles 14 күн бұрын
Thank you! That 4Runner is pretty sick as well
@reelwurld4Dz 16 күн бұрын
Where is the harness connector located that you found in the end?
@CruisinMiles 14 күн бұрын
At the top of the transfer case towards the middle
@dr.lefort1596 16 күн бұрын
It’s funny because I was planning on buying some of the Dr. KDSS spacers and products… until I heard him speak. I’ll just stick with the Toyota engineers. Thanks
@mosthated8190 18 күн бұрын
How did you get that flashing effect ?
@rij.martin 24 күн бұрын
Super information! I didn't realize we had so many options lol. Pricing would have been a great addition to each bumper in the video. Thank you!
@atulboruah6182 Ай бұрын
Need in India,
@patriotsleepercell4060 Ай бұрын
can you charge a bluetti battery bank with this?
@CruisinMiles Ай бұрын
A bluetti power station yes. You just have to use the correct cables going into the power station. I will be running a jackery 1500 off of mine. In essence, a dual battery system, but no source coming off the alternator to the jackery. Just the solar.
@patriotsleepercell4060 Ай бұрын
@CruisinMiles ok thx
@NigelNaughton Ай бұрын
Thanks for all the hard work and advocacy to keep our lands public and accessible. So much of it looks like fun! Would be cool to help out sometime.
@wonderoffroad Ай бұрын
cant wait to see what you do in 2025
@CruisinMiles Ай бұрын
Thanks Robert.
@Solvefunction Ай бұрын
Its been a good year, looking forward to more
@CruisinMiles Ай бұрын
It really has. Thanks for all the help
@djpotmeter Ай бұрын
Hi thanks for this beautiful video❤ I'm dealing with the diff lock that doesn't disengage...I checked all fuses next I check the relay...is it possible to add 9v from the relay plug to disengage? Wich pin would be? If u know
@CruisinMiles Ай бұрын
It should be possible, but I’m not sure which pin that would be
@T.Germany-i8r Ай бұрын
اجمل ماصنعت اليابان
@digitalpanic2323 Ай бұрын
you should put the link to all that equipement !. thank you. for the video
@CruisinMiles Ай бұрын
@@digitalpanic2323 the links are in the description
@virginiacruiser.7989 Ай бұрын
Thanks, Dude! Helped to know the sequence to remove headlights. Keep up the vids.
@CruisinMiles Ай бұрын
@@virginiacruiser.7989 thanks for watching. Glad I could help in any way!
@CruiserCorner Ай бұрын
Great video, thanks for sharing! I'm doing this same project right now - couple of things: 1) follow torque specs on gas connection lines (along w/new crush washers, as you said) 2) test everything out before re-installing rear driveshaft 3) you really should replace that sock filter on your fuel pump 4) You really should replace all the gaskets and hoses while you are in there - rubber parts have a shelf life and these are old trucks.
@CruisinMiles Ай бұрын
@@CruiserCorner yes. I really should have replaced that filter. And yes I should have replaced the gaskets. ESPECIALLY SINCE I HAD BOUGHT THEM!! I completely forgot that I had bought them when I started replacing the tank. I was so concerned with getting the truck back up and running that I completely forgot that I had to replace other things as well. But thank you for making those points.
@CruiserCorner Ай бұрын
@@CruisinMiles The important thing is you fixed it and got it back on the road. Good job on that! And you shared your experience with the rest of us. Thank you for that!
@AlexChaveria Ай бұрын
How did you paint or remove the chrome for the grill ?
@devinscott447 Ай бұрын
Where did you get these headlight?!
@CruisinMiles Ай бұрын
@@devinscott447 I was able to score them used. But they are sold through Unique Style Racing
@SakibAhsanTamim-x8s Ай бұрын
Hello, "Cruisin Miles" I was analyzing your channel and saw that in your channel have some problem, That's why your channel is not much growing and not getting much engagement, If you can solve these problems, Your channel will grow like a storm. If you tell I can tell these problems. Where can I tell? Here or ig or where?
@MartyMart5 Ай бұрын
Do they switch back when you turn the car on and off?
@CruisinMiles Ай бұрын
@@MartyMart5 they switch back to white
@mglwinbo3909 Ай бұрын
Nice
@elizle Ай бұрын
I bought a 92 that has been sitting for over a year. Starts on starter fluid and runs well until you stop spraying the starter fluid. I'm replacing the fuel pump, but I'm going to clean the gunk out of the tank, lines, and injectors first. Haynes manual doesn't say anything about disconnecting the drive shaft, but the tank is definitely hung up on it.
@CruisinMiles Ай бұрын
@@elizle I’ve read some people report that they were able to remove the tank without disconnecting the driveshaft, but I figured with only four bolts. It’s easy enough to remove and get it out of the way.
@wonderoffroad Ай бұрын
Great video we should do more together
@CruisinMiles Ай бұрын
@@wonderoffroad we will
@sierra1boy Ай бұрын
Does your ABS indicator also light up when the center diff is locked?
@DEEuroworks Ай бұрын
Thanks to Marcus for helping out.
@fabioramriez6880 Ай бұрын
I did this to mine also, super easy! Thanks for sharing.
@CruisinMiles Ай бұрын
@@fabioramriez6880 thanks for watching!
@hapkijo9713 2 ай бұрын
I wonder if this would work on my GX470, that would be sweet.
@CruisinMiles 2 ай бұрын
@@hapkijo9713 a couple companies do make them for the 470. If youre in Southern California, Restless Offroad and JW Offroad make them
@JamesSmith-SC 2 ай бұрын
Love your 80! Where did you get that lift gate ladder?
@CruisinMiles 2 ай бұрын
@@JamesSmith-SC I found a seller on Facebook marketplace. I was able to score it for $50. But have since traded it for something else
@jesusflores3354 2 ай бұрын
Freaking love it!
@CruisinMiles 2 ай бұрын
@@jesusflores3354 glad you do. Thanks for watching
@johnq1958 2 ай бұрын
Thanks! Super helpful! One down many repairs to go!
@CruisinMiles 2 ай бұрын
@@johnq1958 glad it was helpful. Thanks for watching
@dieselburner4461 2 ай бұрын
Yota nights?
@dieselburner4461 2 ай бұрын
Awesome Channel new sub. Can’t wait to do this setup on the 80
@CruisinMiles 2 ай бұрын
@@dieselburner4461 thank you very much.
@thelaw300 2 ай бұрын
I came for specific details on the 6” lift and would appreciate a second video that addresses it more than talking to guys from Japan. Killer GX
@jorgesanchezcaracoza360 2 ай бұрын
Try the car shampoo with a Real foam canon and let us know.
@CruisinMiles 2 ай бұрын
@@jorgesanchezcaracoza360 Salty Captain actually sells an actual foam cannon but I decided to try the hose attachment for this kit. I can definitely try the foam cannon
@jorgesanchezcaracoza360 2 ай бұрын
@CruisinMiles yes, that would be nice. I usually use Meguiars or the chemical guys Pink. It would be great to have more options.
@shanevonharten3100 2 ай бұрын
Well you got it very wrong about everyone wanting the 93 up. The main reason i got my 80 is lack of electronics thats why i got a 91 model.
@CruisinMiles 2 ай бұрын
@@shanevonharten3100 I wouldn’t say I got it VERY wrong. You and I are definitely among the few that actually prefer the older models. Especially since there are obviously fewer of them out there.
@wonderoffroad 2 ай бұрын
great video man. we make a great team filming together.
@CruisinMiles 2 ай бұрын
@@wonderoffroad you know it. Looking forward to more.
@AINUAEU 2 ай бұрын
I like the honest review,
@CruisinMiles 2 ай бұрын
@@AINUAEU thanks for watching
@DEEuroworks 2 ай бұрын
Can you put other liquids in there other than water? Lets say coolant for us BMW owners 😃
@louisjuarez3232 2 ай бұрын
I am wondering if the small hole could have been plugged with JB Weld or a similar product ?
@CruisinMiles 2 ай бұрын
It definitely could have been done. But upon reading up on other people’s experiences, it was hit or miss. For some it worked. For some it didn’t. It all came down to how it sets. If you can really clean the area and give it ample time to cure. But I preferred to have one that had no holes in it so I didn’t have to worry about out the JB weld failing.
@realphahtx 2 ай бұрын
I was told they'd be restocking mid. October from one of the sales reps. At this point, being halfway through November. I'm about to give up and just install a 21 gallon, sprinter tank.
@bogdankrstic733 2 ай бұрын
Great video, do you have the link from the aftermarket headlights that you were installing??? Also, do we need to torque it to the specific or just by hand? Thank you
@CruisinMiles 2 ай бұрын
@@bogdankrstic733 it’s Uniquestyleracingstore.com
@hancockschannel 2 ай бұрын
Looks great but I cant believe this cost over $1,000
@CruisinMiles 2 ай бұрын
@@hancockschannel True. But given the price of other bumpers and accessories it makes sense. Plus, you aren’t just paying for the materials, you’re paying for the time and skill to construct it.
@andydvan 2 ай бұрын
Nice video! How are these headlights compared to the factory headlights?
@CruisinMiles 2 ай бұрын
@@andydvan maybe a little more crisp beam, but probably because they are faded like my old factory ones were. But it’s minimal at best. In reality these headlights are purely aesthetic.
@summitwise 2 ай бұрын
Side markers work wonderful plug and play. I bought direct fit replacements for the high and low forward beams (9005 and 9006) for my 1994 80 series. Fitment was straightforward and they worked great initially. After heating up, they started to flicker really bad. LASFIT is sending me canbus decoder harnesses that are supposed to fix the issue. I'll report back.
@CruisinMiles 2 ай бұрын
@@summitwise I’m glad they are helping you resolve the issue. I didnt have that issue on mine but I think it’s because I went with the switch back bulbs.