Buy a Dawson sights yo!

This guy doesn’t have a clue

You jackass! I wanted to see if yours sounded like mine and you didn't even let us hear it. Lol

Lesson learned...clean your stiff regularly

What is best temp for cleaning guns? Thanks

Ultrasonic cleaners are a gimmick 👌

There is no reason to compromise on quality. Use only Original GLOCK magazines.

Unrelated but, what’s up with those Pyrex Measuring Cups? I have yet found one that will pour its contents without spilling all over the place. I use a garden chemical measuring cup as they don’t spill everywhere.

Guy your gun isn't that dirty lol. I don't clean my USPSA pistol till the 3000 round mark.

Pre heat your water.

Not the best for you front sight….Yikes

Why didn't you heat up the distilled water before pouring it in? NO, not boiling. What do the specs say?

I have the same model ultrasonic cleaner and I can fit a completely disassembled XDs 9 into the basket. I wished I bought one with a larger tank so that I could get a stripped down 1911 into the cleaner without crowding the parts. I may buy a larger one. Anyway I always use the ultrasonic cleaner after a trip to the range. Always. The ultrasonic cleaner will NOT remove copper or lead fouling from a barrel. You'll have to use the right solvent to remove the fouling then put the parts into the ultrasonic cleaner.

I wonder how ETS mags would work in a PSA Dagger...

I watched the video on the testing of the Marines magazine for Magpul the PMAG and if these are tested the same or anything close to it the magpul Glock bags should be just fine considering their lips and if they stretch and crack etc. So I got glock and magpul for my ar9.

Thums up FOR ETS MAG.

I've been using ETS mags for years, never had a problem.

Polymer looks cheap.

I use oem glock mags for edc but honestly I have had zero issues with the few ETS 15 rounders I have. My magpul Glock mags though....freaking trash. I cannot recommend them for anything lol.

something didn't work right i use the bigger one for cleaning guns at work all the time and it works amazingly

It's beautiful.

I'm 99% he didn't run it at all. I have this and you have to hit on/off for it to start. Especially with the de-gas. You'll hear it when it goes.

Old video but never saw you press the on/off button. Plugging it in doesn’t mean it’s working it just means it’s on. You’re supposed to hear an annoying buzzing sound & none of that so all you had was heat & the cleaner it’s like you put the same solution in a bucket of hot water & no ultrasonic was used lmao. Press the on button next time man. I have 2 of these ultrasonic cleaners & every part i put in it even my glasses it always leaves particles sitting at the bottom. Your dirty barrel would of guaranteed A LOT Of carbon particles & you know how we know it wasn’t on? Because the color of the water would of instantly change muddy & it’s crystal clear hhaha hope you gave it another shot sometime after & you weren’t discouraged by this but you can’t blame anyone for what happened & i know you were trying to watch out for us so we appreciate it & now we’re watching out for you.

It's not meant to clean guns that never are cleaned and have old caked on parts it needs to be right after shooting or within a couple of days.

Check out kci glock mags theyre usally a third of the price of oem and just as reliable theyre made in south Korea for use by the south Korean police and military theyre pretty much oem with out the glock logo steel lined and everything the only difference is the font used for the witness holes

I dont have a clock but a NAK9 that uses the glock mags, and the glock mags are by far the best in every way. That being said i do have some 27rd Pmags that i use and they work great, but are a bear to load and insert like you said. I shoot the the PMags when im putting them in the dirt to save the wear and tear in the glock mags. Haven't tried the ETS mags yet but will when the other's fail, heck the KC mage that came with it works great, that was surprising.

The original Glock mags were all polymer. Gaston designed them to kinda bow out in the mag well so the user would have to pull the mag free to replace it. When it came to America, Americans did not like that concept and Gaston added the metal insert so it would not bow in the mag well anymore and it would drop free.

Wow how complicated with the sights why wouldn't you just buy an agency slide or send it to them?

Seriously guy! who the hell complains about how hard it is to load a mag, either ammo in the mag or mag in the gun?!?! What a waste of time!!

wrong cleaner... wrong solution... it aint worth a fuck and expensive... simple green extreme and a 60 buck amazon 2.5l machine rocks...

For having spent all that money on that specific Agency Arms set up you think you would know how to take care of your shit better. You sure don’t know how to read the instruction manual of the sonic cleaner very well because that things cleans like a champ.

Is that Hornady ammunition I’m spotting? 🤔

If factory is only one to depend on, they why buy any of the rest?

The seams on the pmags vary in size. And some fall free and some get stuck.

Joey, if you listen to me your ultrasonic cleaner will work amazing. Because I just bought one from Harbor freight. Put as hot tap water as you can inside of it. Go out and buy simple green cleaner the purple one that’s HD. Put it in your cleaner for about 10 minutes and it’ll come out squeaky clean guarantee it!!!

Try this! You’ll have great results! kzbin.info/www/bejne/o3eZoqqPrst4fKs

Definitely try Purple Power Cleaner. I’ve heard from several people that is the magic potion to put in the ultrasonic cleaners!!

Dude glad I came across your vid I m just gonna stick with glock mags. I just bought my first glock so great advise

The problem isn't the ultrasonic cleaner, its you.

Just got one. I'll use today. Looks handy . I'll do mostly brass .Thank you for the video

my ets glock mags SUCK so bad i have had good luck with kci korea mags and magpul mags but nothing beats the factory mags

It removed the paint off of the front site post

Have you had any problems with the rmr by not using the trijicon mounting plate? What about the screw height when mounting it without the plate?

Hard to load mags? Check out the ETS loader! You're welcome😇

He missed a fat point when comparing pressure when loading mags. In a reload scenario, the slide is locked to the rear which takes almost all of the experienced tension away. The only time you're going to have to shove hard is if your loading a mag with a closed slide which is not nearly as common.

Just get a maglula @joey bullseye

I have a couple of all the mags you reviewed, I use the Magpul mags exclusively for pistol matches and have never had any issue seating any mag, yes they are harder to load but if you run through as much ammo as I do you buy a loader which makes that a non issue. All of those mags are good mags I run the ets and kci mags in my pcc and have never had any issue with any of them. If you want to shit on a mag go get you a promag glock mag and experience what a bad mag is like bs nit picking quality mags.

SGM make a metal lined aftermarket mgazine for Glocks.

I guess I don’t understand, if one REVIEWS a product, basically a “How To” review, it only seems logical that one follows the MANUFACTURERS directions to the “T”, simple enough. This video should be titled, “ How NOT to use” the Hornady Sonic-Cleaner. Ultimate FAIL.

No lawyer has prosecuted someone over a trigger pull weight or words on a gun and won the case. If you cite that cop who had "you're fucked." Yeah he walked.