Third Gear Grind

Пікірлер

@thomasfx3190 6 сағат бұрын

Very thorough build preparation and very solid mechanical work to rebuild this terrific VR6 engine! Bummer about the old cylinder head that must have been an expensive day. ❤🇺🇲

@BulliKid 2 күн бұрын

Does this come with lsd? Any idea how much to build something like this

@BulliKid 2 күн бұрын

How much power are you pushing? How much do you think you spent on the turbo charger and supporting mods?

@DennisJoanna-s3x 3 күн бұрын

Perez Nancy Robinson John Miller Betty

@NameName-eq7oe 13 күн бұрын

Have to do timing and clutch on my 12v vr6. Seriously thinking pulling the whole engine and trans may be easier than trans alone

@thirdgeargrind8033 13 күн бұрын

@@NameName-eq7oe As someone who did this once on the ground in a parking lot I would disagree, pulling the trans was not as time consuming, pulling the entire thing would be more time consuming but would be better ergonomically.

@NameName-eq7oe 12 күн бұрын

@@thirdgeargrind8033 Thanks I think I'm going to just do the trans alone as doing timing is already going to be a huge job for me. I've heard it's easier to drop the subframe too but that also seems like more work.

@mro9466 16 күн бұрын

FWD VR6 with LSD is probably better than stock Haldex. At least at stock power.

@codysmith5957 27 күн бұрын

350K mile VRT coming soon lol somewhere in the 560Ks for KMs

@thirdgeargrind8033 26 күн бұрын

Boosting a high mileage NA VR is cheating, gotta put your own turbo miles on that bad boy.

@codysmith5957 25 күн бұрын

@@thirdgeargrind8033 that’s fair haha

@itseyeman2889 Ай бұрын

Will an 01M work with a Touareg 3.2?

@thirdgeargrind8033 29 күн бұрын

@@itseyeman2889 so long as it's the 01m from a 24v vr6 glx yes

@jeremybriand5196 Ай бұрын

Hey! Im curious, did you buy this car from an importer? I am also in canada and would love a bora 4 motion, but I don't know of an importer that brings cars from europe... Plenty for japan, but I can't find one for europe...

@thirdgeargrind8033 Ай бұрын

@@jeremybriand5196 I bought it from it from goo net in 2018. I imported it myself but paid some brokerage fees so some of the work was done for me. Still had to go to a local office in person to pickup the papers and pickup the car from a local car dock with A to B insurance papers before working on the car to make the changes and repairs necessary for an out of province inspection. Europe is harder to export a vehicle. The hard part is finding a trust worthy company and then the shipping is double what it is from Japan even if you're on the east coast. Vehicles over in Europe are also more clapped and have higher price tags usually.

@jeremybriand5196 Ай бұрын

@@thirdgeargrind8033 thanks ! I'll check that whenever I'll be ready to import one. May I ask how much it cost you to bring the car in Canada and get the paperwork done?

@thirdgeargrind8033 Ай бұрын

@@jeremybriand5196 My car landed was $6700 all in.

@fredjones5327 Ай бұрын

Great video, quick question, I’m swapping my 18 Passat GT 3.6L from fwd to AWD, and from auto to manual using a 14 cc 3.6 4 motion haldex. I’m trying to get the front axels situated how can find out if the front axels from a 04 r32 fit my 18 Passat, or where can I look to see what axels are the same??

@johnvanderburgh4502 Ай бұрын

great vid ! quick and good !

@chefboyarrde Ай бұрын

How much would you charge to do mine?

@jeremybriand5196 Ай бұрын

Hey! I was wondering how is that turbo holding up? How many km do you have on it? My 2000 jetta TDI's exhaust impeller went flying through the exhaust and I'm wondering if I should consider this option to fix the car. Also, the engine ran away, but I hope the engine is ok... Although I doubt it 😅

@thirdgeargrind8033 Ай бұрын

@@jeremybriand5196 still just fine

@jeremybriand5196 Ай бұрын

@@thirdgeargrind8033 and how many km do you have on it?

@thirdgeargrind8033 Ай бұрын

@@jeremybriand5196 I put 30,000km of the most abuse with stage 2 you could ask for (uninterrupted WOT for 5 solid minutes up a mountain, with overboost conditions) and its lived it's life with a different owner for a couple extra years now.

@jeremybriand5196 Ай бұрын

@@thirdgeargrind8033 so if you were to do it again, you would buy another one of these?

@thirdgeargrind8033 Ай бұрын

@@jeremybriand5196 with no question.

@ivanvega2821 Ай бұрын

Great video, one of the best I have ever seen. Would this be very similar to a 3.6 vr6?

@BAMN84 Ай бұрын

The cylinder head is not as thick as the block walls and its aluminum?

@emil1997h Ай бұрын

Nice vid bro

@sme7725a Ай бұрын

Nicely edited. This collection of cars is unreal!

@Zenosynes Ай бұрын

Great video. Glad it was recommended to me.

@noonespecial9131 Ай бұрын

My brother just bought a VR6 Sharan for 600 bucks can you believe it? He wants to turbo it but we've got no clue where to start.

@smoke4ndmears Ай бұрын

Rolling the dice using that sunroof lol.

@cameronmcmaster4323 Ай бұрын

This is a 2.8 VR6?

@thirdgeargrind8033 Ай бұрын

2.8 24v BDF VR6.

@RAA12586 Ай бұрын

Cars a riot, love the vr6s.

@adellisdevelopmen6593 Ай бұрын

L.h.d jdm ok

@las10plagas 2 ай бұрын

7:05 yo, wtf did you put in your tank? 😀 you are not allowed to drive on vegetable oil. you know that, right? =P

@bikerlad3138 2 күн бұрын

That’s just a Tdi

@2CENT14 2 ай бұрын

The ending 😂😂😂

@j.m.5995 2 ай бұрын

Did a compression test on my motor and it has 120 Psi on all 6 holes

@destroyeroflight1135 2 ай бұрын

I have a Jetta 12v VR6, this is exactly what i eas looking for.

@Kilpatrick915 2 ай бұрын

Dis needs more likes so more people can see it

@DoanldRounds-ig8kd 2 ай бұрын

Should have bought a ford

@maws7766 2 ай бұрын

Doing a 3.2 engine at the moment, do you know if there is a bit of movement also on the exhaust variator when it's installed (I'm able to move mine, just a small amount), some say it's supposed to be 100% "stuck", other indicate that it is a small movement on that one as well, any tips appreciated :)

@thirdgeargrind8033 2 ай бұрын

It's only supposed to be a small amount, never as much as the intake one. On mk5 it has a little more play than mk4 due to extra variability.

@thirdgeargrind8033 2 ай бұрын

It should never be stuck.

@maws7766 2 ай бұрын

@@thirdgeargrind8033 Sounds good, thanks for a quick reply :)

@francescocola7935 2 ай бұрын

Now i know why my mechanic friend HATES vw

@noonespecial9131 2 ай бұрын

relatable

@shyguy7394 2 ай бұрын

Thats not knock that thing is kicking the door in

@ronnymedina1523 2 ай бұрын

Hi, I got a question. I have a 3.2 from a Touareg I bought the engine with the timing chain done right about 2k rpm I hear some valve noise. Somebody told me that it could be oil pressure or a miscellaneous tube. How true is this? If you could help me I would appreciate it

@koopakoop 2 ай бұрын

no joke for an introduction? just kidding. Love your videos man. I'm gonna be working on a touareg 3.2 in about 2 months time. Your videos are super helpful. I mean that ❤

@louvendran7273 2 ай бұрын

Thanks for the videos mate. I have a problem with airbag module had it changed came on a few months later? Plus the steering angle sensor is there a certain procedure for resetting it? Thanks in advance.

@dubCanuck1 2 ай бұрын

Man, I just did the same thing to my kid's 01 VR6 over the weekend. pulling the axles made life so much easier.

@smoke4ndmears 2 ай бұрын

I can smell this video. Do you do paid consults? I have a BDF VR6 I can't get running and could use someone who knows their schidt.

@thirdgeargrind8033 2 ай бұрын

If it's due to a recent timing chain installation stay tuned, the next video being uploaded is my take on that job, and where people typically go wrong. If that doesn't help, yes I can certainly listen and give advise. Shoot me a DM on instagram, @jcauleyj

@paintsilj 2 ай бұрын

When you talked about replacing the bolts when fitting the timing chain kit, is that always necessary? I recently had a timing chain kit fitted but not sure the bolts were replaced at same time.

@thirdgeargrind8033 2 ай бұрын

It is not. In my experience it's been totally OK to use them as long as they're torqued correctly.

@paintsilj 2 ай бұрын

@thirdgeargrind8033 great thanks. Having my VR6 resprayed and lots of welding and new parts

@joellopez4632 2 ай бұрын

Sound amazing!

@makapaka5222 3 ай бұрын

Where do you bought compression ring?

@TURBODON.6 3 ай бұрын

So whatbhappened woth the injectors? Dod u get it to idle well?

@thirdgeargrind8033 3 ай бұрын

Yes. It was all down to my emu black tuning. I'm still battling an IAT issue which can be solved with a custom table once I figure that out.

@themo2476 3 ай бұрын

I have a MK1 Audi tt quattro 3.2L 24v VR6 I'm starting the process of turboing it hoping to have the only MK1 VR6T tt in my country

@thebobloblawshow8832 3 ай бұрын

Absolutely pointless. Stop uploading. Thank you, KZbin management.

@noonespecial9131 3 ай бұрын

Beautiful sound, keep it up.

@samanthalynnnicholson9962 3 ай бұрын

Why! did that lower timing sprocket come out tho?

@thirdgeargrind8033 3 ай бұрын

Under torqued.

@MrSparsilis 3 ай бұрын

Hello i have a question what is better swaping v8 or w12 or quad /dual turbo charge my vr6 touareg help plsss help .. i want the most cost effective smart and reliable way to rech 600 hp.

@MrSparsilis 3 ай бұрын

Hello i have a huge question witch is worh itt more making my vr6 twin turbo buying a part car v8 or w12 witch is the most reliable and smarter to do to my car ??

@driessen16 2 ай бұрын

Buy a 3.2 24v and destroke it to a r30 engine. It can handle 1300hp and 9000rpm

@smoke4ndmears 4 ай бұрын

Is timing these BDF engines any different than the other 24V's? We can't seem to get ours running right after a head replacement.

@thirdgeargrind8033 4 ай бұрын

AUE is the different one, lacks one vvt gear, usually coilpack and plug wires like 12v. Recheck your timing.

@smoke4ndmears 4 ай бұрын

Heyyyy, is there anything unique to timing these 2.8 BDF engines? We've been struggling getting ours running right after replacing the head gasket.

@thirdgeargrind8033 3 ай бұрын

I'm launching a comprehensive timing video within a day or so here. Stay tuned if you haven't or have solved it regardless.

Ең жақсы KZbin

Пікірлер