Пікірлер
@andrewkeith9256 22 сағат бұрын
Thanks for the guide, I'm running it as a challenge with friends on RaceRooms and this has helped alot.
@1974Topper Күн бұрын
yeah that helps a lot !!!
@jeanmosquea9539 6 күн бұрын
How much did all the material cost?
@kenli312 7 күн бұрын
@5:31 do you mean by setting something other than autoblip in the settings menu and use clutch and throttle to manual blip？in general, which mode would your recommend for driving mx5, autoblig, completely manual, etc
@FindingSpeed 7 күн бұрын
Autoblip is no good for MX5. Set it manual and learn how to rev match with a manual throttle blip when shifting down to first gear (and sometimes even down to second). It’s the fastest method and gives you the most control.
@rhubarbranch4188 12 күн бұрын
I guess I have the same questions about cost as the posters before me. I really enjoyed your build, good design, consider at least some aspects of it stolen. 👍🏻🔥
@Phoenixfett 14 күн бұрын
just knoticed yours tell you the price as you build it? can i ask how you do that and also where you got the metal from? many thanks
@Etrius76 17 күн бұрын
Nice Video as always, but what happened? No Videos since almost a year?
@Phoenixfett 25 күн бұрын
Hi, thank you for this series of videos, - I'm a DCS sim pilot and also wheelchair bound (this will make sence to you soon) I have issues setting up my gear so i cant even go for a fly often, brought the next level racing flight sim pro and it didnt do what it was supose too and was too uncomfitable too (40" seperation between throttle and stick) but i found your video and now am looking to design a ali station. May i ask, do you think they would be strong enough (ballence wise) to have with out a chair, so i can use it more as a front frame for example, so i can use my gaming chair or wheelchair depending on my day. did u order your alli profile from the company you send the quote to on the software or someone else (sorry if i missed it) and would u be willing to say roughtly how much it all came too? many thanks
@FindingSpeed 25 күн бұрын
Thanks for watching. You could definitely tailor this to make a frame that simply sits in front of you. I don’t know what kind of weight of equipment you’re putting on it, but mine wasn’t top heavy with out me sitting in it. It needs a non-slip mat or even rubber feet ideally since it’s surprisingly lightweight and would slide on hard / wood flooring. I designed it in the software, which prints a handy parts list which gives you dimensions. I used that info to order direct from my supplier. I spent around £250 on the profiles, but I don’t know what today’s prices are like. Hope that helps!
@Phoenixfett 21 күн бұрын
@@FindingSpeed Thank you for the reply, helps a hell of a lot tbh, as for weight i really dont know either, but i know the Foot pedals are probably most of the weight so should help hold it down. i will start coming up with some ideas soon then, winwing took a ali frame setup with them to the flight sim expo to show off what can be done, so i might try and work with that. Thanks again bud this is so helpful
@Phoenixfett 20 күн бұрын
@@FindingSpeed got another question for you, if you dont mind, how did you know what parts you would need for "strengh" of holding parts? - im new to all of this so i honestly dont know how much weight one of these can / should handle
@FindingSpeed 20 күн бұрын
@Phoenixfett assuming you’re dealing with racing / flight sim equipment you’ll be fine with 40/40. People often use 80/40 or 120/40 for based to make them higher or heavier, but in terms of strength they’re incredibly strong so you won’t need to worry unless you’re creating an industrial application.
@Phoenixfett 19 күн бұрын
@@FindingSpeed Dude you're a legend, thank you so much
@die.saavedra Ай бұрын
Hey man, very nice video! I started playing iracing 2 days ago with zero driving experience. I don't even know how to drive a real car. I don't have a wheel, only an xbox controller. In my first day, I wasn't even capable of staying inside the track. My car was also oversteering and understeering in every corner. On my 2nd day, I started to get better and better and better and I was able to stay inside the track at lower speeds but at least I was finishing the laps. On day 3, I started to gain more speed and soon after I managed to do my fastest lap at 1:51! After this video, I think I should be able to improve my time a bit more!
@Faffel Ай бұрын
What happened to this guy? Found his videos immensely helpful in my rookie months and it seems like he just up and disappeared.
@carlosyanez345 Ай бұрын
Hi there, which setup did you use for these?
@3bracing256 Ай бұрын
That's a quick lap! I've some work to do!!!
@ardawanx Ай бұрын
Your iracing coaching link doesn't work. Are you still coaching?
@ardawanx Ай бұрын
Subscribed. Pls make more bmw content. Chreers
@natecordner8761 Ай бұрын
Just watched a Miata race at lime rock today lol
@Vuco7 Ай бұрын
Did sth change since last year in this race? I feel like now u can easly make it below even 58s
@juliiseeyou Ай бұрын
Every month I'm giving away 🤓🤓🤓Shut up and play your video. Giveaways worked for 5K sub KZbinrs in 2011.
@FindingSpeed Ай бұрын
lol. Git gud at iRacing and you wouldn’t have to watch 👍
@juliiseeyou Ай бұрын
@@FindingSpeed Lol nice one. Im sure another giveaway will give you the boost you need!
@qztip Ай бұрын
As someone who has driven a car before…. What on earth are they thinking at iracing headquarters? No car drives like the mx5… even on cold tires, heck you can drive on snowy roads and have more grip than that car. I get it… it’s a car that is incredibly rewarding to master… especially if you do a lot of driving on hockey rinks, frozen lakes or margarine. Seriously though, can I get an amen? Honestly the car makes me giggle sometimes by the insane antics.
@DirtyMike2024 Ай бұрын
if you look at the setup, the front sway bar is firm and the rear is UNHOOKED. Bro who actually came up with that????
@qztip Ай бұрын
@@DirtyMike2024 that’s wild! I guess they wanted to exaggerate the forces and reactions on the car, but I can’t think of a reason why, especially considering the towering cost of using iRacing, you’d think they would want the first road car rookies use to be a friendly foray into the esport…. But what do I know..
@randy4950 18 күн бұрын
I tried this car, gt4 and gt3, I found this is most suitable for beginners. I can drive the other two smoothly for sure, but way slower than others and cannot apply the correct technique
@khairanfakhryperdanaputra6633 Ай бұрын
Hey,i just wanna to ask,on this lap do you turn off the abs on the car?
@alrx4149 Ай бұрын
I know this video is 3 years old but I've got 2 questions, where can you buy that wheel mounting plate from and do you recommend using an actual car seat (and where can I find measurements for them if you know)
@FernandoAfonsoMotorsports Ай бұрын
thanks for the guide!
@terionname 2 ай бұрын
Could you share the pdf?(
@psydaVinci 2 ай бұрын
What is ALS "1" ? Seems like anti lag system, but now it is set to "AIR" constantly and I can't find any way to change it
@gzaos 2 ай бұрын
What have you done to your csp v3 they are unrecognizable? you should do a video just on these bad boy
@marcinsek1230 2 ай бұрын
Thank you so much for the video. Very useful. I look after for a sim rig and your video also design fits my needs perfectly. Can you send me that’s documentation please.
@nunofrednunes 2 ай бұрын
Absolutely amazing video! THANK YOU for the work you had with this. It almost makes it too easy... And the tips on the software and motedis website; that's just too good. Absolutely golden! I was struggling a bit with finding suppliers in Portugal, but this way it's just a streamlined, enjoyable process
@FindingSpeed 2 ай бұрын
Thanks for watching and glad it was useful. Good luck with your rig 🏁
@Considine7 2 ай бұрын
Hi I’m new to iracing how do you get that map on your display? With the green and purple sectors also, loving your videos 😄
@FindingSpeed 2 ай бұрын
Thanks for watching. I used Racelab apps. You can use it free but some features are only available with an affordable subscription.
@holyshiftstudio 2 ай бұрын
You still racing, buddy?
@FindingSpeed 2 ай бұрын
Sadly not. I’m out of racing due to health issues. Working for Apex Racing UK and VRS in brand and marketing so still kind of around! Thanks for watching 🏁
@marksutherlandjr.2121 2 ай бұрын
@ 1:13 Once we go flat out through that section, when we catch it right, and were on the limit all the way through, it's one of the most satisfying sections of turns that I've experienced so far. Summit Point Sector 3 gives me the same sensation. LOVE IT!! Seriously Im addicted to thatfeeling now.. If my PC didn't run iRacing. It would be a 2000$ Paper Weight. I literally use it for NOTHING else.
@FindingSpeed 2 ай бұрын
Sounds like you’re right at home. Go get ‘em 🏁
@garrybartlett6853 2 ай бұрын
I'm looking at this now, my issue is having the placement of mounting for chair and pedals... can I mount to the base, or do I need all the cross members...? Ie, the 40x40...?
@heuksalman 2 ай бұрын
Hey do a monitor stand!
@azamat19 2 ай бұрын
I was sure you were using a cheat software, because no way 3.43.13 is a possible time haha
@omiurinha 3 ай бұрын
I dont know if its my config of the car or what is it. But if I break while turnig as u do on turns 2 and 5. My car spins immediately. Any advise?
@FindingSpeed 3 ай бұрын
Hard to say without seeing your driving, but it sounds like you’re lifting out of the brake way too fast. Don’t focus on wheee I start breaking - focus on where I stop braking (and how I trail the brake into the apex). This will keep your car more stable and controllable during corner entry.
@Muckduck92 3 ай бұрын
Oh man when I saw this video I really wished it was of the old Rudskogen. I used to do roadracing on it in my youth together with the family. It was super cool on 2 wheels!
@smeltn 3 ай бұрын
Do mind sharing your prestarted templates?
@RavenRecoil 3 ай бұрын
When I do this I have a line down the center as if the pictures didn't line up. Any thoughts? I have a 2560x1440 monitor. So I doubled that resolution.
@jayson1567 3 ай бұрын
Same question how much was the last price?
@derekbrunette222 3 ай бұрын
Not drafting the guy in p1 during the straight was a stroke of genius
@JaceCatonMusic 3 ай бұрын
know this is an old video, but wondering if you remember your cost for the frame components only? I admittedly didn't have the patience (since I am in the US) to jot down the cost of every item and quantity and convert to US currency. Hoping you might be able to throw a ballpark figure out just trying to see how much I would save if I built this over buying/ if I built this if I could spend the same on upgrading accessories/sim racing components to get more value for money
@FindingSpeed 3 ай бұрын
Probably around $200-250 at the time roughly speaking. No idea what aluminium prices are like these days, though.
@SwiftyNShifty 3 ай бұрын
Thanks for the vid. I am trying to join your discord channel but it says unable to accept invite when I click the link.
@FoxRob93 3 ай бұрын
I've been thinking of building my own also.
@kestrel1975 3 ай бұрын
Great Track Guide - thx
@Stevethepirate8973 3 ай бұрын
Good guide. It's frustrating that I have most of the gearing and turn in points nailed on this course, just a few corners are hanging me up. This helps key in on a few mistakes. Thanks!
@FindingSpeed 3 ай бұрын
Good luck in your races 🏁
@maxsim_racing 3 ай бұрын
it’s Okayama week. coming back to your videos over and over again! keep putting out the good work sir 🔝🏁
@FindingSpeed 3 ай бұрын
Thanks! Glad they’re useful 👍
@colinboone9920 3 ай бұрын
Bro is a demon
@colinboone9920 3 ай бұрын
In terms of speed!*
@FindingSpeed 3 ай бұрын
Thanks for clearing that up 😈
@ducman8888 3 ай бұрын
As others have mentioned fantastic explanation and thank you for introducing the software.
@FindingSpeed 3 ай бұрын
Glad it was useful to you!
@garyhawkes1179 3 ай бұрын
Do you have one with the fixed setup?
@egj1975 3 ай бұрын
This did a lot, almost 2 seconds faster after 15 minutes of driving. I was way to smooth and also 2 corners where I was way of.. I often think to much about the corner I am entering and not what is after the corner. Thanks a lot for this.
@FindingSpeed 3 ай бұрын
Glad it helped and thanks for commenting 👍
4 ай бұрын
How do you hide the menu to have a clean screenshot?
@FindingSpeed 4 ай бұрын
Default is space bar