21 күн бұрын
Жыл бұрын
Пікірлер
@johnnytwotimez Күн бұрын
Spray foam it all. Done.
@theconstructionzone7 Күн бұрын
Spray foam over the block wall and the crawlspace understructure is definitely a good option and I think that’s what you meant. To cover the dirt though it has to be a thick plastic or what is called a rat cap, which is basically a thin layer of concrete with the moisture barrier underneath it.
@johnnytwotimez Күн бұрын
@theconstructionzone7 oh yea, the underside of the floor after running some pex loops for radiant floor heat. I would want some plastic on or just under the dirt with plenty of square inches of ventilation too.
@howardaltman7212 5 күн бұрын
Originally the ladder was at 69-70 degrees (perfect). After he moved it out it was at 66 degrees (not the best).
@DG-EditsYT 19 күн бұрын
Someone got excited with the sound effects 😂
@j-bob_oreo 21 күн бұрын
its plain as day ... tf you on about ?
@jt5747 21 күн бұрын
I might have a better chance if this wasn't filmed in 120P.
@markad2824 23 күн бұрын
What if your a gorilla?
@vnmcvn86 Ай бұрын
Wow that’s a beautiful 1200 sft adu. What’s something like this cost to build?
@theconstructionzone7 21 күн бұрын
+@vnmcvn86 In the San Diego area, our prices have ranged from around $370 to $420 per square foot on the past for a single level build with minor grading. However, depending on the land and how upscale a client wants to go, it could easily climb to $500 plus per square foot in today’s costs. Keep in mind San Diego, particularly coastal SD, has become one of the most expensive places to live in the U.S.
@Nonsense62365 Ай бұрын
What’s the website to buy EPDM Sill Gasket? Went to Global spec. They don’t have that product.
@chucku1001 Ай бұрын
my first real experience with wagos other than fixtures that came with them was when i worked for amazon at a fulfillment center on their conveyor systems. we had these even stronger wagos meant to be capable of the vibration that they would endure on the conveyors. now, they are what my company uses as a first choice for wire connections.
@rusty-ole-boomstick1268 Ай бұрын
Having the ladder strapped to a solid surface so the ladder does not kick out also helps, no bungees cords, a ratchet strap or if you know ropes two points of contact on a lower rung, clove hitch with a running bowline and two half hitches around a permanent fixture like a post or beam, heck even a small tree. The point of no return is exiting at the top of the ladder on to the roof and entering the ladders rungs for the descend as you should have at least three rungs at the top over the roof.
@trinston13 Ай бұрын
Good video. I like to use a ferrule for stranded with Wagos to.
@The.One.True.B Ай бұрын
Why do so many people not use standoffs lol the number of times I’ve only been able to get on a roof in certain easier spots, or sometimes at all, is because of the standoffs
@victorperez2788 Ай бұрын
Good job
@BallsWalls.Renovations Ай бұрын
Can you vacuum it?
@theconstructionzone7 Ай бұрын
+@EricPotratzM Good question, I have not tried, although it would probably do better then rosin paper.
@djjoeykmusic Ай бұрын
Great video Thank you
@theconstructionzone7 Ай бұрын
+@djjoeykmusic Thanks
@jimlewislather Ай бұрын
Double 60. Good job! Structa Lath though?😭 not a fan of it. Chicken wire all day😁Life long Lather😎
@netlek Ай бұрын
Esperaba ver cuando se les rompiera y nunca sucedió😢
@jessedukelacrosse6470 Ай бұрын
Id like to see a group of no men feminist pull this off 😂 team work fellas, looks awesome 👌
@Belena711 Ай бұрын
I'm a big DIY guy... It really deflates me to watch projects that legitimately require a team. Lol
@theconstructionzone7 Ай бұрын
+@Belena711 There are definitely things in construction that need a team. But there are many ways to tackle things solo, too. With the right gear, one person can lift entire framed walls!
@TheYemcl Ай бұрын
Anyone else a nervous wreck watching this?
@jimkelly1413 2 ай бұрын
How did you apply the zip system liquid flash? Looks very smooth
@theconstructionzone7 Ай бұрын
+@jimkelly1413 We use plastic puddy spatulas to help spread it.
@edenpaut4784 2 ай бұрын
Good job
@theconstructionzone7 Ай бұрын
+@edenpaut4784 Thank you
@edenpaut4784 2 ай бұрын
Good job sir
@Pigporker 2 ай бұрын
This guy thinks he’s chaparro fibras
@WeFindSimpleSolutions 2 ай бұрын
💪
@Eric_In_SF 2 ай бұрын
It’s more correct when you were calling it grain matching. It’s also referred to as wrapping, but it’s definitely not book matching. Book matching is very specifically a central seam that is mirror copied of itself, hence like an open book. And on a flat surface, not a 90° angle. In this case, just grain matching or wrapping the existing texture. Or wrapping a mirror texture had it been separated and opened.
@DavidLopez-wg7eq 3 ай бұрын
One mexican can do that.
@steveligeikis1872 3 ай бұрын
Crushed corners on all of the boards
@fyregus 3 ай бұрын
Nothing some plaster won’t cover?
@makodaniel4885 3 ай бұрын
Every "carpenter" in Texas needs to watch this video. I had a guy put on a roof for me while i was at work away from home. I left 22 sheets of sheetrock stacked in my living room to install myself after I got home and was to be installed after i got my electrical, insulation and studs etc where I wanted them. I came home to find my roof done and all the sheetrock installed, installed over empty wall cavities, installed without the electric I wanted there, installed with no studs on the corners (old doublewide) He came and had his hand out for me to pay him for a job horribly done that I never hired him to do. He kept acting like all these things needed prior to sheetrock were no big deal. I had to rip it all out myself. In Texas your best bet is to just do it yourself. If you hire someone to put in your insulation and your not there watching them, they will absolutely steal all your insulation to sell and wall over empty cavities. In texas over 90% of carpenters or contractors consist of just a guy or 2 with a truck. They are not certified to do anything and wing it till they can get paid and bolt. If you are not there watching them everyday the entire time be ready to have meth vapors in your walls as well. Just do it yourself
@gregcharland 3 ай бұрын
Where I live we have code enforcement officers walk through the project to make sure skill trades and framers have done their work to code before the sheet rock goes up. It is all part of the permit process.
@theconstructionzone7 3 ай бұрын
It’s the same here in California; we have building inspectors. We conduct multiple inspections before the drywall goes up. The largest inspection is the combination inspection for framing, mechanical, plumbing, and electrical work. Prior to that, we have a shear wall inspection for seismic safety, as well as hardware inspections, foundation inspections, rebar inspections, underground plumbing inspections, underground electrical inspections, and more. Even with all these inspections, it’s still beneficial to do a walk-through and check for aspects that the inspector may not be looking for, such as the quantities or placement of electrical and low-voltage systems. This doesn’t mean those things weren’t reviewed prior; it’s just a final homeowner/contractor double-check inspection before covering everything with drywall.
@ForestToFarm 3 ай бұрын
@@theconstructionzone7 in addition to what you said the code is the “ bare minimum “ work to be done. Whether building or wiring I almost always exceed code. All my 120 volt circuits are always 20 amp. I have seen 1 million dollar homes with a top floor all wired in one circuit. We are talking lights and receptacle including the bathroom. How in the world it passed code is beyond me. Terry
@ForestToFarm 3 ай бұрын
Being an electrical contractor and having to find countless covered outlets and lights I feel it would be a good idea to mark the floor where each item is so you can zero in on them quickly without having to resort to photos and videos. Pictures and videos are the best and I have used them many times to come back for future additions. Got in the habit of giving the home owner a copy. They were always happy. Terry
@theconstructionzone7 3 ай бұрын
Great tip!
@zephyr1408 3 ай бұрын
I am a finish guy ! And I totally believe it all carpenters if committed to their trade can learn framing and jump to finish ! Where it gets difficult is doors, cabinetry, railings, Newel posts , paneling , skirt boards, trimming out risers, treads, however; other than that shssss nothing ! Oh and I can frame a wall ( and I am a skilled finish carpenter) but past that ? So yeah nice miters and I would seriously be concerned if they could not ! By the way ? Are your workers on permits or ? My friend just got audited by the licensing board and I had to resubmit my license and bond card ? Because they found several fake SSN # and fined him big time ! And when he said he done his due diligence they told him “ no” other wise you would hv known the sub contractor was phony and all these workers ! I am talking like 90 grand !
@charliewheeler725 3 ай бұрын
Good advice ! The other thing i like doing is if your on grass or soil turn feet so they dig in . On smooth surfaces have feet flat so rubber is in contact. Those rubber mitts that go on top of ladder are a nice idea to keep ladder from sliding. Be safe 😊
@theconstructionzone7 3 ай бұрын
Great point!
@mrtahoe 3 ай бұрын
I don’t think any of the words you say mean what you think they do
@MONEYBOY512 3 ай бұрын
The amount of praise you were giving them made it seem it was freehand. Using a speed square is a basic component of being a carpenter. I don’t know how much skill it takes to run a saw against a guide.
@jpalvarez3513 3 ай бұрын
You know no time is spent with the employees with that pronunciation.
@stephengrenfell1732 3 ай бұрын
If you do a specific thing everyday, you better be good at it. Im not particularly impressedbunless it was his first time picking up a saw
@brandondelcox8065 3 ай бұрын
That’s the level of skill you get from a couple guys. I’ve helped build a bunch of multi million dollar homes along the beaches. They are all framed like trash, if the buyers only knew the lack of craftsmanship they’re paying for…
@JSmith-me1xf 3 ай бұрын
It's a miter big deal
@finndog2759 3 ай бұрын
The guy hugging the wall, shouldn't be up there
@Takoda9721 3 ай бұрын
Great job encouraging these men! Well worth it 💪
@vandykebrant 3 ай бұрын
But no bevel bro. No one noticed that. If you added that then you could glue it. It looks tight but only a 16nth of the miter is touching. It’s going to shrink and then you’re going to have a dark crack up there.
@IsaacGarcia-wj7pb 3 ай бұрын
It's not the skill saw. it's the Mexicans behind the skills saw!
@francisslattery4894 3 ай бұрын
Yeah nice try Garcia
@AllBergie 3 ай бұрын
Wish the other 95% of framers would be this good. Window sills out 3/4” on so many houses I put windows in, it’s truly asinine.
@stephanieduttenhaver6013 3 ай бұрын
could you send me email so I can figure out how you mounted the quartzite to the hood?
@theconstructionzone7 3 ай бұрын
Yes, please email [email protected]
@AlejandroRodriguez-xs4lt 4 ай бұрын
What is the foam wrap for?
@theconstructionzone7 4 ай бұрын
That’s to protect the pipe from rock in the concrete foundation. Pipes vibrate as water passes through and over many years those rocks can wear through.
@AlejandroRodriguez-xs4lt 4 ай бұрын
@@theconstructionzone7 oh got you thanks! I just did new drains in my adu and plumber didn't do that lol hopefully I don't have any issues
@lucysamaniego9398 4 ай бұрын
Where ican purchase
@theconstructionzone7 4 ай бұрын
Alumission gates
@GODCHILD1st 5 ай бұрын
❤❤❤❤❤❤
@BROKEN-OC 5 ай бұрын
Essex😅
@BROKEN-OC 5 ай бұрын
Villa Angelina