5 ай бұрын
5 ай бұрын
2 жыл бұрын
Пікірлер
@atsimas 3 күн бұрын
Don't screw in screws with a ratchet straight away. It's too high a probability to strip them. Talking from experience. Make a start with a screwdriver then you can actually use even a power tool also.
@doctorquestian 4 күн бұрын
And don't forget, just keep spraying WD-40 all over the moving parts. That really seems to help.
@BubbaStump37 6 күн бұрын
WARNING this guy will get you killed.......
@brianclark803 7 күн бұрын
Dude going to get someone killed Low voltage can difribulate your heart.
@woodsie5474 8 күн бұрын
Remember, safety first. You should NEVER wear jewelry when working on electrical equipment, no bracelets, necklaces, or rings. I have ruined bracelets and rings, and almost lost a finger to a ring. Not worth it!!
@henrymuasml 7 күн бұрын
Thanks man! I will not wear them in the future during work!
@Shhhhhhhhh999 9 күн бұрын
You dont know what your doing. You swap parts out hoping to fix it. Some actual evidence that the capacitor is bad would be nice. If you consider yourself a Technician then you need to do better before making bad videos. Good luck in the future.
@dandearman2871 8 күн бұрын
He fixed it didn't he? What are you complaining about. He just saved a ton of money and got to make a video about it to boot. So what if changing the capacitors didn't fix it. He's only out around 40 bucks.
@henrymuasml 4 күн бұрын
Hey buddy! Thanks for your comment! As an engineer, we always follow safety procedures and make our best educated guesses in term of troubleshooting, don't we? I am always pursuing perfection and evidance as i go, and thanks for your advice and critics :) As a matter of fact, I just purchased a better DVM which has the function of measuring capcitor and I did prove that the fan capcitor is bad. The specification for the fan capacitor is 7.5 micro F as i showed in the video, the actual value is 1.8 micro F. No wonder the fan won't kick on. On the other hand, the compressor capacitor supposed to be 45 micro F , the actually value is 39.9 micro F. So this one is also getting bad. Yup! You are right! I couldn't say 100% that this capacitor will fix my problem, but in a 90 degree day or night and with engineer's best instant and guess during troubleshooting, I nailed it! This video is made to encourage engineers like me not to be intimidated by the "professional" aspect of this A/C appliances repair. It's not a horrible problem or dangerous one to fix as long as you follow safety precautions. Thanks again! I will make better videos next time and I will keep improving my techniques :)
@henrymuasml 4 күн бұрын
@@dandearman2871 thanks buddy for your support and encouragement :) Really appreciate that! You are absolutely right! There is no fr**king way that I will give any A/C man $700 for the repair :) I have better channels to spend that kind of money! :D and I bought a better DVM yesterday and proved that the capacitor is indeed bad!!! Thanks again for your strong support! DIY is always our best value in life!
@bobn8865 12 күн бұрын
You check the wrong terminal on the contactor for voltage. That terminal is the 24 volt, need to check two terminals at the bottom of the contactor to ground. Never trust the disconnect to be wired correctly.
@henrymuasml 12 күн бұрын
Thanks for the reminder!
@rottweiler9535 12 күн бұрын
DO YOUR TEARLY MAINTENANCE, (POWER OFF) WASH OUT THE CONDENSER COIL, REPLACE THE CONTACTOR AND CAPACITOR EVERY COUPLE YEARS, AND DISASSEMBLE THE FAN MOTOR, OIL THE BEARINGS WITH THE CORRECT OIL, THE UNIT WILL LAST A VERY LONG TIME, CONTACTORS AND CAPACITORS ARE EXTREAMLY CHEAP AND FAIL OVER TIME, YEARLY MAINTENANCE WILL SAVE DOWN TIME
@henrymuasml 12 күн бұрын
Great reminder! I was actually checking the coil cleaner stuff this morning prior to checking your message! I really need to get on top of these things before anything else major happened to it! Thanks a lot!
@davidwarren2331 8 күн бұрын
Clean pass the filter before the coils...you will see some fur on the cooling tubes,radiator.Vacuum that up.
@henrymuasml 4 күн бұрын
@@davidwarren2331 Thanks buddy! Really nice of you for the tips! I appreciate it!
@atsimas 3 күн бұрын
My fans tried to die the one in the first year and the other in the second, poured some transmission fluid I use in my car (80-90) into the casing and I haven't seen a problem since. 10 years have passed since I did that. You need specialized tools to disassemble the fan motor.
@animalcorvair 12 күн бұрын
just fixed my boys trane it stopped working last week but it started working so i had him get caps for it ,,monday it went down again his fan was down put in his new 7.5 uf cap in an now its back up an running the 45 uf is for the compressor as his caps are not together like what you are working on..
@henrymuasml 12 күн бұрын
Great!
@hanjar425 16 күн бұрын
Finally I found your video.... Thank you 🙏🏽
@RogerPack 19 күн бұрын
This one is more like "what to do if WD40 and/or lithium greae aren't enough" :) (In my case spraying with some penetrating oil then jiggling it and I heard some gunk inside break and it started working again)
@jaydenkopp5168 24 күн бұрын
Saved my life man
@JenniferChotiner 2 ай бұрын
You are a wonderful time and wallet saver - thank you!! I have a 2009 Acura MDX and my dog seatbelt was stuck (just like the other person) making that rear seat useless for everyone except the dog. I followed your instructions- and avoided the false lubricant claims on the internet- and voila, I have a functional rear seat again! The hardest part was prying the two casings apart, but I was glad to know that it was possible without ruining the entire buckle.
@Tiffanydw4 2 ай бұрын
🎉THANK YOU SO MUCH!!!! Finally all un stuck and working again thanks to you and your video. 🎉
@philipfm 3 ай бұрын
Thank you so much for this video. Mine will not lock and the rear seat bottom is too difficult for me to remove. I'm going to give this a try
@daddystatusactivated8406 3 ай бұрын
Thank you good sir! I'm selling my car and my dog's safety harness seatbelt adapter was stuck inside the lock. Thanks to this video, I was able to get it out and keep the adapter with very minimal damage to the lock itself. Thank you, thank you, thank you!
@lindabosse9417 3 ай бұрын
My seatbelt locks the three in front two of them broke is it easy to replace them
@valderja 3 ай бұрын
Nice nails
@luzejo28 4 ай бұрын
THANK YOU
@isa_reaper2593 4 ай бұрын
Thank you! So helpful! I can finally use my back seat again 😄
@EliasoPataso 4 ай бұрын
Thank you. My cat’s seatbelt leash was stuck inside the buckle, and this was the video that helped me release it.
@DashcamNation1 5 ай бұрын
Hello there, do you mind if I feature it on my channel? Credited on screen & link in description.
@christiankrippenstapel4336 6 ай бұрын
Well done! 👍
@hgill257 8 ай бұрын
This was awesome!!! Didn’t want to have to go to the trouble of replacing the buckle!!! This helped so mcub
@michaelogden5690 8 ай бұрын
Thank you so much for this video I was able to fix my issue with your help
@staceeedwards2969 8 ай бұрын
How were you able to pry seatbelt case open?
@RogerPack 19 күн бұрын
At the beginning he says he uses a piece of metal and a screwdriver?
@davidupton5252 9 ай бұрын
Happy to hear how interested your child is just love their fascination.
@davidupton5252 9 ай бұрын
Wd40 is good for leather watched a video of how many things wd40 can be used on leather being one of them
@r2gmail620 9 ай бұрын
so much easier to understand if you would pay attention to your volume and tone -- speak up and get to the point!!!!!
@courenm-s8951 9 ай бұрын
Ungrateful
@christieb09 11 ай бұрын
Thanks for the video. Hopefully I’ll be able to fix my seat belt.
@kevinc764 Жыл бұрын
If it doesn't work we're busted😂
@grominwithrob1339 Жыл бұрын
This is how you teach your kids to diagnose and solve problems.
@r.a.c.richard Жыл бұрын
Damn you just saved grandma from going to the dealer 🙏
@robertborges823 Жыл бұрын
Nice, thanks
@moeganim3509 Жыл бұрын
Thank you I have the same problem on Jeep99 Cherokee. the good thing you do not have to remove the whole seat. thank you again.
@nightbutchers Жыл бұрын
Thank you this helped...spot on
@bencolombia337 Жыл бұрын
Muchas gracias.
@cocoa3393 Жыл бұрын
I’m goin 2 buy a can of air spray. I tried the 40 but it’s still stuck and I was considering replacing but dealer wants bout 4 🤦🏽♀️. I could get a used 1 but I think I’ll try takin it apart 1st cause this is the 3rd time it’s gotten stuck.
@mohdpuding1597 Жыл бұрын
tq
@ExploringCabinsandMines Жыл бұрын
Mine you cant insert the belt at all.
@johnmccaffery9178 Жыл бұрын
Thank you for your perseverance. I watched and was about to do as you did but then I thought I'd try using my new can of WD40 spray silicone grease on a long nozzle, as opposed to the WD40 multi use which isn't a grease. It worked first time without any dismantling. Might not work for everyone but I'm happy.
@josechepe21 Жыл бұрын
I have a toyota and it has the same problem. It's a hassle to get stuck. I appreciate your video. Greetings from Mexico 🇲🇽
@heychris8220 Жыл бұрын
greetings from Mexico and thank you for your help
@margaretenoha5394 Жыл бұрын
The kid would be a good vlogger
@karlharfmann1296 Жыл бұрын
Appreciate you sir! Thank you for making this video.
@lzh3131 Жыл бұрын
I totally agree with the other people who commented on the lack of videos. You did a great job & you had a very good helper! I’m subscribing…keep up posting videos. Thanks.😊
@SkyPC Жыл бұрын
- La hebilla de tu cinturón NO entra?? - El cinturón NO queda anclado en su lugar?? Acá la solución: kzbin.info/www/bejne/a6vNpHhmqNOghJI
@kathykobell3506 Жыл бұрын
Thank you
@fortalezadlajuventud Жыл бұрын
thank you very much for your video you got me out of trouble
@izaasar597 Жыл бұрын
Man you safe me i was able to unstuck it and make it work thanks to you, cheers from spain