Thank you for this video! I'm hoping to do this and a torqstorm to my r/t. Sick ride.
@canyou_heminow9 күн бұрын
@roblloyd5213 thank you. It's been a fun budget build
@edbrock841610 күн бұрын
What advantages have you noticed? What size T. B. did you use? Are you using the 6.1 injectors?
@xplayboi.savagex13 күн бұрын
That’s a 6.1 lol not not a 6.4 392
@canyou_heminow13 күн бұрын
@xplayboi.savagex check out my other vids and get back to me 🤦🏿♂️. 5.7 based 392 stroker with ported 6.1 intake manifold smart guy.
@canyou_heminow13 күн бұрын
@xplayboi.savagex they also don't make 6.1's for the 11-14 Chargers... good try though.
@xplayboi.savagex13 күн бұрын
@@canyou_heminow they dont but you can swap it lmao , I have a 2014 srt8 Chrysler 300 with a 6.4 and looked into the 6.1 intake and if anything it’s worse . Especially for a 5.7 I’m a mopar certified tech . And I don’t recommend
@canyou_heminow12 күн бұрын
@xplayboi.savagex A ported 6.1 manifold is better than the stock 5.7 manifold I had.. are you retarded or did you miss the point where I said my motor is a 5.7 based 392 stroker kit? Look it up certified tech 😁. Again. Before you talk, peep some of my other vids. I run with redeyes. I bet you're getting gapped by 5.0s and that's why you're on my channel trying to get faster 👍🏿. Move around.
@canyou_heminow12 күн бұрын
Also the Aluminum manifold is better for boost pressure haha. It was an upgrade. My car is an RT. You're salty because YOU CANT READ and are trying to imply my car is a 6.4. Still the 5.7 block smart guy. Never said that. Read the title again haha.
@RustyWrenchesAuto19 күн бұрын
How many subs and what type of
@canyou_heminow18 күн бұрын
One 18
@fragment7320Ай бұрын
Kellogg Frosted Flakes their great head ah😂
@canyou_heminowАй бұрын
@@fragment7320 My slogan when I cross the finish line 🏁🏁
@Toxichemi345Ай бұрын
Do you have a link to buy this kit
@canyou_heminowАй бұрын
@@Toxichemi345 No link but I included all of the part numbers
@prodbyrhudeboiАй бұрын
Meaning we need a slower explination video for us noobies
@XQZ8Ай бұрын
❤
@canyou_heminowАй бұрын
@@XQZ8 miss ya 😉
@BLOODYDEATH1000Ай бұрын
I've tried this method multiple times for my fog lights even went to the extent of putting them in the oven for 20mins on 280°F to no success, im starting to believe mine are permasealed.
@canyou_heminowАй бұрын
@@BLOODYDEATH1000 I hope u figure it out. Maybe try to gently pry it apart with heat.
@asaprulers2262 ай бұрын
This thing ain’t a manual is it? I know it’s a charger but
@canyou_heminow2 ай бұрын
@asaprulers226 It has the auto stick so I can drive it like a manual with the paddle shifters or the gear shifter...
@MonicaHarman-sb8yu2 ай бұрын
Made it louder
@manwithaplan142 ай бұрын
Sound like a diesel 😂
@canyou_heminow2 ай бұрын
@manwithaplan14 well it is kind of supercharged lol 🙃
@christianhardwick65302 ай бұрын
Hellcat 2’s do look good muh man My scat has the reg Hellcat wheels that come with the Dynamics pckg
@canyou_heminow2 ай бұрын
@christianhardwick6530 thanks bro. I like the 5 spokes.
@kvshgaming2 ай бұрын
i can smell the bondo
@spicynachodorito42342 ай бұрын
oh yea that whistle noise is terrible the car is a piece of junk now. That being said i’m know for buying junk i got a pack of newports a bolonge sammich nd 10$
@canyou_heminow2 ай бұрын
@@spicynachodorito4234 🤣🤣. I swear it didn't do that before.
@zlokyo2 ай бұрын
is it procharged? i hear a lil BOV there guy
@canyou_heminow2 ай бұрын
@zlokyo lil BOV action 😤
@papa_p1ne2 ай бұрын
It sounds fukn tuff g
@canyou_heminow2 ай бұрын
@@papa_p1ne Appreciate ya🙏!
@prontoschwabb25102 ай бұрын
This was your fault btw
@canyou_heminow2 ай бұрын
@@prontoschwabb2510 😁😁
@canyou_heminow2 ай бұрын
kzbin.infoNTdh-6I4WHU?si=9u8hXh7KP4gLKTxo
@Freddy_Confetti2 ай бұрын
Nice win
@canyou_heminow2 ай бұрын
@@Freddy_Confetti it was a fun run
@Freddy_Confetti2 ай бұрын
Sick
@canyou_heminow2 ай бұрын
@@Freddy_Confetti thank you
@davidcox72282 ай бұрын
PLEASE don’t “cowboy” that fantastic revolver.
@canyou_heminow2 ай бұрын
@davidcox7228 I have been told and learned my lesson sir 🫡
@eric316m2 ай бұрын
Came out clean af! Nice work bro. Straight to the point vid. U got my like
@canyou_heminow2 ай бұрын
@@eric316m ty
@DrippDroppz2 ай бұрын
@@canyou_heminow I was unsure about the dielectric grease. Where are you putting them on, the connectors that lead/come from the halo ring?
@canyou_heminow2 ай бұрын
@@DrippDroppz Just the electrical connectors. It will help keep moisture out.
@usiel11032 ай бұрын
What intake bolts did you use you for the link ? I have the same thing on my 5.7 but one of the bolts broke and I have a leak now .
@canyou_heminow2 ай бұрын
@usiel1103 I can't remember off the top of my head but the info is somewhere in the vid. My bad.
@pesomenacek4k2 ай бұрын
So if you have the caliber and rotor all ready, only thing to is cut the metal thing and then that’s it? That’s how you upgrade?
@pesomenacek4k2 ай бұрын
What’s the website
@canyou_heminow2 ай бұрын
@@pesomenacek4k 797 performance
@halodavid33022 ай бұрын
Bro I’m trying to do this on my Durango but where do I connect the purge canister connector to ?
@canyou_heminow2 ай бұрын
@halodavid3302 I used some 5/16 rubber hose from autozone to rerun mine.
@SBALL140en3 ай бұрын
Boyyy look at you💯🔥🔥
@canyou_heminow3 ай бұрын
It's coming along! Can't wait to finish the wrap!!
@TRDGTT3 ай бұрын
I'm Dat Nigga
@omarroberts345.73 ай бұрын
Is that a lsd ?
@canyou_heminow3 ай бұрын
Yes 3.91 Getrag
@omarroberts345.73 ай бұрын
🔥
@canyou_heminow3 ай бұрын
@@omarroberts345.7 🍩🍩
@BlackSheep_300c3 ай бұрын
Are you on springs ?
@canyou_heminow3 ай бұрын
Yea. H&R Lowering Springs!
@kobe-_-66033 ай бұрын
Looks like my story mode Franklin’s car build from gta
@canyou_heminow3 ай бұрын
🤣🔥
@jwhite38303 ай бұрын
Careful the 13%ers already looking for it.
@canyou_heminow3 ай бұрын
🔫 🔫
@MrGETLIVE013 ай бұрын
Maybe it looks better in person..still a great car
@canyou_heminow3 ай бұрын
I've been getting a lot of love at meets. Still not done with the wrap though!
@brandonisenhower81623 ай бұрын
What's up with the shiny shit? Bedazzled or different kind of flake in the paint?
@canyou_heminow3 ай бұрын
It's forged carbon fiber. I'm wrapping the whole car with it then adding racing stripes. Just changing the look for a little while..
@brandonisenhower81623 ай бұрын
@@canyou_heminow The orange and carbon fiber look good together.
@canyou_heminow3 ай бұрын
@@brandonisenhower8162 I have something else in mind. This is just temporary. I'm gonna wrap a few parts a day until I finish...
@brandonisenhower81623 ай бұрын
@@canyou_heminow you doing anything to the engine or drive train?
@canyou_heminow3 ай бұрын
@brandonisenhower8162 already a built 392 stroker on a little boost. 3.91 rear LSD with one piece aluminum driveshaft and upgraded axles. Dings Racing Trans Valvebody and 3600 stall FTI Torque converter. Built trans and 200 shot of nitrous is next!!
@Chiefsb2bchamps3 ай бұрын
Looks pretty stupid
@Weirdoh8er3 ай бұрын
What color is your charger?
@canyou_heminow3 ай бұрын
Your mom kinda likes it. Just like the car, we have unfinished biz ..
@Chiefsb2bchamps3 ай бұрын
@@canyou_heminow oh snap what an original comeback 😂😂😂 sorry man she would never be with a a guy with a micro 🍆
@Chiefsb2bchamps3 ай бұрын
@@Weirdoh8er it’s not the charger that’s dumb it’s that black looks dumb I wouldn’t own something that cheap bro you parents buying you one doesn’t make you cool 😂😂😂
@Chiefsb2bchamps3 ай бұрын
@@canyou_heminow sorry she doesn’t like micro d i c k s
@rodneyorodneyort59553 ай бұрын
Fire 🔥 💯
@canyou_heminow3 ай бұрын
🙏🏾🙏🏾
@bagchasertavaris53743 ай бұрын
🔥🔥🔥
@canyou_heminow3 ай бұрын
💎💎
@CotyPangallo-hk6wp2 ай бұрын
What rear end u got?
@canyou_heminow2 ай бұрын
@@CotyPangallo-hk6wp 3.91 Getrag LSD. No more one wheel peel 😁
@Toxichemi34518 күн бұрын
Cool
@canyou_heminow18 күн бұрын
@@Toxichemi345 🙏
@TinyEscobedo3 ай бұрын
That shi ugly asf
@BrandonCamp-ug9rk3 ай бұрын
Slow
@canyou_heminow3 ай бұрын
Um. Ok 👍. What u drive?
@BrandonCamp-ug9rk3 ай бұрын
@@canyou_heminow no Dodge is just slow
@canyou_heminow3 ай бұрын
@BrandonCamp-ug9rk Again. What do you drive fast boi?
@kieyonbranch36673 ай бұрын
How much hp did it add?
@canyou_heminow3 ай бұрын
I honestly dk. I did it for looks and the aluminum is better for the supercharger boost..
@canyou_heminow3 ай бұрын
Haters gonna hate 🤷: kzbin.infoNTdh-6I4WHU?si=hsGgB-FvhYL-hv_u
@MRANGO9993 ай бұрын
Put the newer body kit on it would look clean
@canyou_heminow3 ай бұрын
Good idea. Been thinking about the Vicrez WB kit.
@BestEver-b8z3 ай бұрын
Very nice ❤❤
@canyou_heminow3 ай бұрын
Thank you! Supercharged and Stroked. A work in progress!
@dtmis99543 ай бұрын
that shit is ugly asf😭
@adan.v32303 ай бұрын
what is the spring part number is it a 50888?
@canyou_heminow3 ай бұрын
Yes. Those are the ones.
@392GB3 ай бұрын
So what I want to no what is the main key for the brembos is it the spindles , or the rotors or both
@canyou_heminow3 ай бұрын
Spindles
@392GB3 ай бұрын
@@canyou_heminow so can I have any rotors ? If I got the spindles or ?
@canyou_heminow3 ай бұрын
@392GB yes. Any SRT rotor will work if you get the spindles... That's the proper way to do it. This way is just a backdoor/cheaper route with spacers...
@michaelrogers36643 ай бұрын
I just did this to my 2009 police pk. I switched to srt spindles. Surprised they went on like that
@lukemei5ter3 ай бұрын
Bro bro how you get to 240 ? Do you already have a low temp therm? The 180 solved my issue for the most part no tune. It goes up to 219 an drops rifht back down to 180 181
@canyou_heminow3 ай бұрын
I have a 3.91 rear diff so that increased my rpms at highway speeds.
@canyou_heminow3 ай бұрын
I still have the other tstat. I could/should try that one too