Love it already, just started the print. Thank you for the great Fusion engineering and usage of Prusa printers :) The video was also just great, easily on a level of Tom Stanton or similar other cool KZbinrs. cheers from Bavaria - take care and rock on, Martin
@adam.jirovecКүн бұрын
@@martinfromtirol3828 Thanks!
@vmachacek2 ай бұрын
Does not look like a speed boat really, but apart from that its awesome (sorry if its too harsh). But joking aside it is exactly what I was looking for.. I promised my son lego powered boat and now I can deliver, thank to you guys!! You saved me ton of time. Do you think changing the gear ratio would make it run faster and/or M/XL motor?
@adam.jirovec2 ай бұрын
@@vmachacek Hey! Thanks for the harsh feedback. The L motors will run the boat a little faster… also doubling the propellers, or custom adjusting their shape could help. Excited, Adam
@vmachacekАй бұрын
@@adam.jirovec could you please share the cad files? I want to accommodate XL motor with gear and it would be handy to print couple more lego holes inside the hull
@adam.jirovecАй бұрын
@@vmachacek Send me an email to: [email protected] and I will reply with the CAD file.
@kakde.s3 ай бұрын
Bro whats the fan called
@isaelmonsivaisandrade14254 ай бұрын
thaks so muuch¡
@pradhyumansindha80588 ай бұрын
What is the diameter of CF road?
@adam.jirovec8 ай бұрын
carbon fiber 6mm diameter tube to 500mm in length!
@tysonhaas1799 ай бұрын
Ok, I got everything assembled but I have a couple questions…1. How is the landing gear supposed to be mounted? You offered the option for it but didn’t show it in the build video. 2. How does that band keep the wings from coming off? He shows how to put it on, but it doesn’t show what is keeping them secure on the trailing edge of the wings. 3. Again, showing the installation of the rudavator control rods, you say to run them through a hole but the video doesn’t show what hole you’re talking about and I can’t see any hole that is open at the rear where the rods are supposed to come out. Now I have control rod bending and slapping the top and bottom of the fuselage every time I move the servos. You guys did a great job with this glider, I just wish the video was more clear on certain parts of the build.
@adam.jirovec9 ай бұрын
1. 16_lg_mount_L_lg_mode and 17_lg_mount_R_lg_mode are supposed to be glued on the 1_1_fuelsage_type_2 and a wheel of an appropriate diameter and width has to be fitted. I am currently working on publishing that as a model as well. 2. The band is under tension and provides a fixation of the wings to the fuelsage 3. Both tail rods run through the center channel, which is only visible from inside the fuelsage. Thank you for this comment. This will help me to improve the Live Build Manual.
@tysonhaas1799 ай бұрын
@@adam.jirovec ok, so for the landing gear, I’m guessing that the two brackets glue on each side of the wheel well, and you just put the tire in between them and run a pin/axle through the middle?
@tysonhaas1799 ай бұрын
@@adam.jirovec also, can I present another idea that I think would improve the aesthetics?? Is it possible to create a cowling to fit over the motor so it doesn’t stick out like a sore thumb…and the last thing I found was if you were to add some stress relief holes on the hinges of the ailerons and rudavators, it would reduced the tension and pressure on servos and lower the torque required to move the control surfaces. I actually cut out a few relief holes along the hinge line and it makes a huge difference in force needed to push/pull the control surfaces equally considerably lower stress on the servo motors. Anyway, just and idea 😁
@abdullahhashmi17139 ай бұрын
I've printed it and i wanna know where the CG should be how far from leading edge?
@adam.jirovec9 ай бұрын
Ideally 36mm from the Leading Edge as instructed by the manual.
@jabx10 ай бұрын
Great video!
@davidjonesdmd10 ай бұрын
Please carry a hook knife and be careful! kzbin.info/www/bejne/bX2odWanbZ2lfdk
@blackholefalling480210 ай бұрын
good work boys
@ExplainwithShaun10 ай бұрын
This boat and Video was Lots of fun to make! Thanks Adam for being a Great lead on this project!
@DayBoo0910 ай бұрын
This being sped up makes it so much funnier 💀
@adam.jirovec10 ай бұрын
It’s already pretty fast even at normal speed!
@airbornefishing487110 ай бұрын
How long was the control wire for the V tail ?? Just trying to buy the right one.
@ishaanmishra95 Жыл бұрын
🤯🤯
@adam.jirovec11 ай бұрын
🙈
@ExplainwithShaun Жыл бұрын
Good job Adam this was a very good Video. Looking forward to the next one.
@onurdorduncu6639 Жыл бұрын
Flying Adam
@onurdorduncu6639 Жыл бұрын
Damn bro
@ExplainwithShaun Жыл бұрын
We did it BOYS!
@ExplainwithShaun Жыл бұрын
This is cool.
@blackholefalling4802 Жыл бұрын
indeed it is
@skyleaderuk Жыл бұрын
Nice clip. Looks like a good feature.
@nathandonias1607 Жыл бұрын
Can i get the links to the parts you used? Im a beginner but idk what parts would work
@gjsmith6259 Жыл бұрын
*Promo sm* 😔
@thomasjohnson6669 Жыл бұрын
Very good build video
@sylviemcritchie6258 Жыл бұрын
Promo SM
@ExplainwithShaun Жыл бұрын
This looks so fun!
@jmcfadden8618 Жыл бұрын
I reprinted the fuselage with 2 layers as my first print was too weak, added fiberglass tape to fuselage and wings to protect on belly landings. Set up with 2304 motor and 850 3s lipo. Weight was just under 500g even with extra layer and tape. Balance was good. Cramped fuselage but initial flight test was good. My biggest issue was motor mount but as it turns out I was able to attach my motor without using it. I used a part from a 2812 with a screwed on piece of wood. Inserted the part into end of fuselage and taped it on. Since motor is small no issues and 2304 has more than enough power. Should be a fun plane. Once winds calm down I'll do a longer test.
@adam.jirovec Жыл бұрын
That’s awesome! How exactly do you mean the two layers? Nevertheless, it’s fascinating how light it turned out… 500g and reinforced! Let me know once you take a video of it flying! Adam
@jmcfadden8618 Жыл бұрын
@@adam.jirovec I think the weight came in good because of the small motor and 850 battery and LWPLA with two layers just on fuselage and some fiberglass tape didn't seem to add much. Looking forward to getting it out again, but too windy for now as I'll want a pretty calm day for more testing. Thanks for the model. Printing the control surfaces with the wings, tail was a great idea to make the build easier.
@jmcfadden8618 Жыл бұрын
Motor mount didn't work for my motors but printed it with a raft and taped a small piece of plywood to the raft . This will allow me to try out a couple of different motors. Should work good.
@jmcfadden8618 Жыл бұрын
I assume you just glue on the motor mount? I need to get some long wire for the servo links as the ones I have are a few inches short.
@jmcfadden8618 Жыл бұрын
Thanks for the info. Starting printing and so far so good. Just wondering how plane handles grass landings. Printed planes are fragile. Should I use a skid as the grass area I use is a bit rough? Will wings slip off without causing excessive damage on a hard landing?
@adam.jirovec Жыл бұрын
What material are you going to use? I printed mine LWPLA and I would not even describe it as fragile… Belly landings without any modification on grass are absolutely the best.
@jmcfadden8618 Жыл бұрын
@@adam.jirovec I'm using LWPLA. I'll go without mods as you suggest.
@jmcfadden8618 Жыл бұрын
Looks good. How far back is the CG? What motor did you use? Just wanted to get weight, thrust as a starting point.
@adam.jirovec Жыл бұрын
The cg should be less than one quarter of the mean chord length. I used 2306 2250KV motor with 3s. However, a 2s might perform better in this model, as it is very lightweight. Feel free to read more information here: www.printables.com/model/445044-rc-plane-falkonsen-1
@KalibasauRC_64 Жыл бұрын
Nice model
@stevelawrie7087 Жыл бұрын
What an amazing little flyer that plane is!!
@jabaricobain Жыл бұрын
Taking playing with paper airplanes to the next level extreme
@ExplainwithShaun Жыл бұрын
Yo! That’s me!
@williesforeal9979 Жыл бұрын
Nice flight. Good looking plane . 🍻👍
@williesforeal9979 Жыл бұрын
Nice flight. Good looking plane . 🍻👍
@maksim183 Жыл бұрын
thanks for the great model! does it have a place to install a flight controller?
@adam.jirovec Жыл бұрын
Hello! Not directly predetermined. However, there should be enough space inside to install a decently-sized flight controller. Download the STL and make sure!