Can I use the mat that is in my van? It has some cushion like carpet padding under it. Then just put click together flooring over it? Or do I need to put down some plywood first?

Very good info.

Very good presentation video of the different structures of 2 vans , 👍

Your work is excellent and precise… Thank you for your commitment to do the right thing🙌🏼

Start from the outside towards the center to prevent diminished adhesive at the corners and edges where it is more prone to peeling.

Nice tips, thank you.

Odyssey provides EXCELLENT customer service! They stand behind their work and products. 💯 recommend.

Even in an RV, I think a P-trap is important at every drain, sinks and showers…

Never heard of one having trouble! 😬

With all due respect has anyone ever tested the actual noise reduction from a van floor that had strips of sound deadening material put in just the valleys, because without running a continuous layer across the entire floor including the wheel wells I’m skeptical that it would add any significant reduction in noise. As a former science teacher you would have to complete two identical vans one with the strips of material & one without and then drive down the same roads with a decibel meter. I suspect all you are accomplishing is to add 50 mm of height for a lot of money? Secondly, who came up with the term decoupling for the idea of reducing heat transfer between surfaces which essentially is the exchange of thermal energy between physical systems. The meaning of the word “decoupling” is the separation of something that was previously joined or coupled. Therefore, “decoupling” has nothing to do with heat tranfer!

I have the rtx 2000! Not installed yet!! Worried now!!

No P trap or line vent on the sink? The sink drains gonna vent smells from the grey tank into the van, otherwise looks very nice

Great Detail Planning Thank you Nick! From Miami

great job nick!!

A lot of Nicks thought went into this build as well as mine watching Nick keep up the great work

Well done!

Hi, can I use that lattice on a sprinter van?

Couldn’t watch because we are on the road, headed your way!!

Looking good, as usual

Why do you have the pump mounted so far forward from the tank and hw heater?

Will do! Side note, I asked questions on yesterdays live feed and apparently they didn’t show on your end. You checked and said “ no question” I had a few up.

Hello???

??

Those are heavy duty slides. What’s going in that drawer?

Can you build the cabinets and counter that way? Wood glue and Brad nails? Also add a few screws???

Sorry I’m late!

Vbhq is back!

When you put your tape on and sealant do you turn it down flush to the underside or just 1 thread showing under? Or do you have your tape as a guide cause the plastic is 1/2? the first fitting you putin.

Could I use carpet tiles as a sound dampener then layer with sound guard moisture control underlay before I put my ply wood on then another layer of underlay before I place my laminate flooring most of this got for free just trying to see if there is an effective use for it

Do not connect large accessories to the starter battery or you will regret it. Use a house battery instead.

Maybe you should leant a topic before trying to teach it.

Where is your shop

Thank you for your support

Kilmat does nothing to reduce road noise... lol Mass loaded vinyl does

Tourig charges too much for such a plain and bland van builds. And overhead cabinets are squeaking even though they are brad new, which look like something they bought at a Harbor Freight.

What was the ambient temp when he was running AC for 2 days at 60F??

Thanks for such a thorough look at the setup you’re building! I was wondering if you knew what the part numbers are for the CCP surround as well as the cap/cover? Our 2023 Transit didn’t include those parts from the factory 🤦‍♂️

Did I miss the video where you show the installation and wiring of your 2nd alternator and Wakespeed Regulator? That would be valuable information to share if you can?

Could you give a link to those vents for the water tanks

Ah yes, a 50minute video on crimping a cable 🫠

Is the wire to the tail light on the drivers side included in the harness that you extended that goes to the ground on the drivers side? I am extending mine right now and am having trouble getting enough slack out of the tail light cables.

You have made such a difference in my van conversion experience…your explanations are so clear that my hubby and a friend cut and installed CSL window on my sliding door…Thank you Thank you so much… My prayer was answered… Thank you… Waiting to receive my my drivers side window to install… do you have a video explaining that one ? Please post so we can follow your clear explanations again … Again Thank you❤🎉 Grace and Mike from Miami

This is a really GOOD video, you took your time and put in the effort to explain things really well. Nicely done!

I love watching a professional build. Thank you for sharing your time and secrets.

Do you still have the original grill? A piece of scrap metal flew off the back of a truck and smashed mine! Would you be willing to sell it if you still have it? Thanks.

Did you have any issues with the 35W panel mounting holes not matching up with the Unaka mounting gear holes?

thanks!

I have a Transit 250 , it doesn 't have that kind of light and I want to add , what materials do you recommend and where can I buy them?

How is the X2 performing? Any experience with the X3 48V?

Have you had any trouble with brass fittings mated into the plastic water tank? I read somewhere that metal male fittings can cause problems with plastic female fittings.