Sorry I cannot make this work at all and I've followed the manual exactly?
@Raymond_duck15 сағат бұрын
Realise I'm a bit late to the party but I've trying recording using the squelch function but it always starts to record regardless. Do you need to select the VRX squelch after you've set up the recorder?
@ABSplastic3 күн бұрын
Is there any method to transfer from sdruno's wav to a human-hearable audio format?
@SDRplayHamGuides2 күн бұрын
I don't fully follow what you're asking. Use an audio editor to convert it to 20-20,000 Hz ?
@RobBob5555 күн бұрын
probably the WORST aspect of SDRplay is the memory panel, it really sucks, cant even delete an entry, so cumbersome, its a dogs dinner..needs scrapped and rewritten. having to manually go in and open the file in notepad JUST to delete a memory is ridiculous ! and WHY cant we adjust column widths from anywhere ??? why do we have scroll to the top ?
@SDRplayHamGuides2 күн бұрын
I select the frequency of the entry I want to delete and hit DEL on my keyboard. Save my bank and carry on monitoring. I've never had an issue
@ManuelPinner10 күн бұрын
Now Your need to add, a Digital Voice Decoder, for P25, D-Star, Yeasu Fusion, and DMR, also NXDN, Heavily Use in Europe!
@nortonics574524 күн бұрын
I've set SDRUno audio out to my sound card, open and select streaming in the plugin, go to BlackCat SSTV and select streaming, but it does not receive the stream - the spectrum shows no activity. But if I select the mic input that works. Why doesn't the stream input start receiving the stream?! PS - I'm using the trial version 2.5.1 of BlackCat SSTV.
@SDRplayHamGuides22 күн бұрын
You need to select the BCS SDRuno plugin within the SDRuno plugin panel. A virtual audio cable is not needed.
@nortonics574522 күн бұрын
@@SDRplayHamGuides I've done that, and click 'streaming'. The numbers increase in that little window. But going over to BlackCatSSTV and choose the streaming choice from the pulldown it just sits there, dead.
@SDRplayHamGuides18 күн бұрын
@@nortonics5745 I've not seen that happen. Have you contacted Blackcat Systems?
@KarlWitsman27 күн бұрын
I don't listen to FM radio unless there's a local emergency; however, I am very glad to see SDRConnect coming right along and adding features.
@SDRplayHamGuides27 күн бұрын
I do every so often. When 2m or 6m is open, I'm glued to FM broadcast trying to monitor some DX.
@GeAlMaDi27 күн бұрын
Good to see a new plugin for SDR Connect.
@khalilmekdachi707028 күн бұрын
No RDS in Japan. 残念。😢
@SDRplayHamGuides27 күн бұрын
Does Japan embed any data within FM Broadcast?
@steveblanchard729328 күн бұрын
RDS works fine on FM in the UK
@dean526328 күн бұрын
Very thorough demonstration.
@SDRplayHamGuides27 күн бұрын
Thank you for the kind comment.
@RickCutter29 күн бұрын
I'm undecided about going back into SDR - My dongle is long dead. This Video is very helpful!. Everyone tells me SDRplay and UNO is the route to go and I have a mini-whip to go outdoors.
@SDRplayHamGuides28 күн бұрын
The RSP1b is our lowest cost-of-entry full-featured SDR we offer. Also, check out our new multiplatform software application called SDRconnect.
@WarrenPostmaАй бұрын
SDRUno is the most insane SDR software app I have used, and I have used 40 of them. It's not the modularity or the flexibility I mind, it's that every UI anti-pattern in the book was lovingly built into this UI. UPDATE: It seems a replacement with a much saner user interface is already in beta.
@SDRplayHamGuidesАй бұрын
SDRuno is one of many and not the only application that is compatible with your device on Windows. I recommend installing others (SDRconnect. SDR++,HDSDR, SDR-Console or SDR-Angel) choosing the one that works best for your workflow.
@zl4hdamateurradio378Ай бұрын
Thanks for that
@SDRplayHamGuidesАй бұрын
You're most welcome.
@elodiemirzaАй бұрын
How does the recording function work? Can you independently control and record each VRX to their own file? Also, would I be correct in thinking that you can record two separate bands if you have the Duo, e.g. Primary in on 2M and VRX0 is on 70CM with each using their own receive tuner?
@SDRplayHamGuidesАй бұрын
As of preview 3, it is a single recording with the choice of selecting the VRX if multiVRXs are in use. This is for all devices.
@VasyVasiiАй бұрын
How do I change the reference frequency offset setting in SDRconnect?
@SDRplayHamGuidesАй бұрын
That function has been not implemented as of yet
@davidsradioroom9678Ай бұрын
I have Preview 3 installed for my RSPDX r2. I have tried the procedure in the Preview 2 video without luck Any suggestions?
@SDRplayHamGuidesАй бұрын
Nothing has changed regarding direct frequency entry between P2 and P3. You can try deleting the config.json file created by SDRconnect. AppData\Roaming\SDRplay\SDRconnect
@davidsradioroom9678Ай бұрын
@@SDRplayHamGuides What would that do?
@SDRplayHamGuidesАй бұрын
Place SDRconnect back to defaults at the next launch
@coldwater57072 ай бұрын
I had my RSPDX-2 working but now I am setting up my radioanalog panadapter to Icom 7300. I think it connects through omnirig? Where is the button for omnirig. I see videos on how to do it with SDRuno but not for this version? Tnx
@SDRplayHamGuides2 ай бұрын
I'm sorry for not getting back to you sooner. I was not notified of your post. SDRconnect does not have rig control yet but it is coming soon.
@coldwater57072 ай бұрын
@@SDRplayHamGuides Tnx, I have it working with SDRuno. I think I will just way for the plugins to work with SDRConnect before switching over...I got in over my head playing around with too much new s/w at the same time:)
@Swede_4_TRMP2 ай бұрын
Greetings from Sweden! You guys just got yourselves a new subscriber 🎉
@bobmcgann83463 ай бұрын
Excellent tutorial! TYVM!
@RelaxingMusicfromASMRKri-sq8nt3 ай бұрын
I tried to refresh the IQ File but there is no list to choose from.
@SDRplayHamGuides3 ай бұрын
Click the Refresh Device List icon and then click the Play icon.
@GrayPlayer3 ай бұрын
How to copy a list o a file of frequencies to listen to?
@SDRplayHamGuides3 ай бұрын
Have a look at this URL. I have pre-compiled, SDRuno banks that you might find useful
@anthonylovell29463 ай бұрын
what if you don't have a callsign?
@SDRplayHamGuides3 ай бұрын
A shortwave listening assigned callsign should work swarl.org/materials/swl-call-signs
@sempertalis12303 ай бұрын
Does not work on my M3 Mac with a RTL-SDR V4 . Does not recognize the RTL-SDR. Works fine with SDR++
@SDRplayHamGuides3 ай бұрын
Correct, SDRconnect is for genuine SDRplay products only
@coldwater57073 ай бұрын
How does one get Antenna C (BNC) to connect. Drop down under antennas only shows ANT A and ANT B?
@SDRplayHamGuides3 ай бұрын
Which device is in use?
@sonarmb3 ай бұрын
As of 2024...the link goes to a Porn site??????
@SDRplayHamGuides3 ай бұрын
The frequency lists live at www.sdrplay.com/sdrplayhamguides/
@jcvee154 ай бұрын
Is there a way to save the panel configuration once you have it set the way you want it? Thanks!
@SWLSignals23-hp6vp4 ай бұрын
I know this is an older video, but thank you. I just did what you did since my PC monitors pretty much make the 15000kHz full of noise. What an improvement! Thank you.
@888DaveT4 ай бұрын
Sorry for coming in so late! Question: I have Windows 11, so do I still have to enable my laptop microphone, and if I'm using VB cable, will the microphone force me to record background noise? I take part in ARRL FMT (Frequency Measurement Test) events every April & November, and I need to determine the most accurate estimate of received Frequency. Will the recording be a ".WAV" file?
@ragglegumm5 ай бұрын
Unable to use direct entry as the display is stuck in band specific and will only allow frequencies within that band. How do you input frequencies outside specific bands ?
@LoanwordEggcorn4 ай бұрын
Click KeyPad instead of Bands, under the band list. That changes the mode to keypad. This is one of the problems with having different modes in a user interface.
@johnclements34414 ай бұрын
@@LoanwordEggcorn Save problem here. Was on 40M band (7.030). Select Keypad and enter 101500000 (FM radio) and pressing enter jumps back to 7.314986. Enter 3.500 and jumps to bottom end (6.986789). The MHz and KHz buttons just hit the bottom top limits of the band as well. Must be a secret escape. Linux Preview 3 here.
@LoanwordEggcorn4 ай бұрын
@@johnclements3441 Sounds like the band buttons may limit the input to those bands.
@johnclements34414 ай бұрын
Further testing - Keypad works UNTIL you go to a band then your limited to the band. Close and restart to use keypad again.
@LoanwordEggcorn4 ай бұрын
@@johnclements3441 It looks like pressing a specific band button limits one to that band. HOWEVER pressing the same band button AGAIN to deselect it seems to remove the band limits.
@gerhardrausing7775 ай бұрын
Sometimes i can tune way down... to 24 khz and sometimes i can not... very strange. SDRUno stops sometimes... like 2000 khz... why is this?
@georgestein74845 ай бұрын
Lower price point - don't you really mean at a lower price?
@badermarafie18715 ай бұрын
Is there any plugin decoding noaa satellite?
@SDRplayHamGuides5 ай бұрын
No, not that I am aware of but numerous 3rd party standalone decoders like WXtoIMG
@robertcarle46235 ай бұрын
Very helpful, thank you!
@gfmucci6 ай бұрын
It would be helpful if as you mouse around to different settings, there would be some explanation as you selected various settings.
@jameshause12256 ай бұрын
Great information. The last part of video, went so fast, I couldn't follow much at all what you were doing. Will watch other video's, and thanks for doing these video's.
@ZL2SEA6 ай бұрын
Hi Mike, thanks for video, is it possible to use this software to measure FM VHF/UHF frequency deviation to set the drive level on a transmitter ? thanks Regards Nigel
@SDRplayHamGuides6 ай бұрын
I have never done that, I am not 100% sure. If I find the procedure online, I will try it and respond again.
@TeamYankee26 ай бұрын
To be honest.. I can't beleive how bad the UI is on this... bit orf a mare!
@SDRplayHamGuides6 ай бұрын
That's ok. Lots of compatible, free 3rd party applications you can try.
@walterreil40016 ай бұрын
Thank you for the informative video. As of Apr 11, 2024, I just installed SDRconnect and it is operational. I just created a secondary VRX display, but there is no X to close that display. ------ Oh ----- I can just barely see the X, which is EXTREMELY faint!
@SDRplayHamGuides6 ай бұрын
You are very welcome.
@philkennedy3426 ай бұрын
Many thanks enjoyed that👍👍👍
@alanhart12386 ай бұрын
i would like to use SDR to locate the source of broadband noise in my sw receiver on 3.8 Mhz by cruising the neighborhood with the appropriate antennae. Measuring the amplitude of said noise with regard to FCC limits would be a plus if the noise source is uncooperative for official complaint with measurements stated
@SDRplayHamGuides6 ай бұрын
This site should assist you with that. www.nk7z.net/category/info/rfi-mitigation/
@BwanaJesuasifiwe6 ай бұрын
why if I right click on the frequency it changes yellow and gets stuck?
@SDRplayHamGuides6 ай бұрын
I don't know why, I've had no reports of that happening. Right clicking the spectrum in SDRconnect does not lock my VFO
@BwanaJesuasifiwe6 ай бұрын
@@SDRplayHamGuides right click the frequency counter/selector, (the numbers at the top used to scroll between frequencies).
@SDRplayHamGuides6 ай бұрын
If you right click the frequecy readout, that will place SDR-Connect into direct frequency entry mode. Hit ESC on your keyboard to exit this mode.
@donkb2ysi1956 ай бұрын
How do you enable HRD mode for the RSPdx?
@SDRplayHamGuides6 ай бұрын
HDR mode is ONLY selected when using one of the framed bands below 2 MHz.
@controllercontroller11857 ай бұрын
This video was very helpful for me… Thank You will be watching more
@SDRplayHamGuides6 ай бұрын
Glad you found it helpful. I hope you find the other videos helpful as well.
@janedagger7 ай бұрын
Finally, someone explains things I didn't know. Thank you thank you thank you... you soooo rocketh.
@SDRplayHamGuides7 ай бұрын
You are very welcome. Glad to read that you found this video helpful in learning SDRuno.
@janedagger7 ай бұрын
@@SDRplayHamGuidesDammit.. I have a picture/photo done bay an artist..that fits this soooo well.. but, no photos on ewwwtube :) and its passed to me on FB only.. it is someone's art after all Gotta addy? cos you'll like it
@civicviiibest76927 ай бұрын
Hi. Could you please send me the Aismon 2.2.0 program because I can't find it... There is only version 2.0
@SDRplayHamGuides7 ай бұрын
Sorry, I don't have the setup file.
@55jplock7 ай бұрын
Thank you I am completely new to SDR radio I look forward to learning much from you. This is way superior to my 30+ year old Kenwood R-5000, before that I used a BC 348Q receiver from WW2 surplus. That radio I donated to a WW2 museum in Broken Arrow Ok.
@SDRplayHamGuides7 ай бұрын
I hope you find these videos helpful.
@paveljeludovsky7 ай бұрын
+
@pumper34x7 ай бұрын
Maybe next time do a set up about 4x the speed you normally do. That should help new people out.
@MrVishalarwade7 ай бұрын
Question: How to directly jump into saved frequency from memory panel ?
@SDRplayHamGuides7 ай бұрын
Make sure the MCTR button is enabled (illuminated) and click the frequency that you want to tune.