Todd Plummer

Пікірлер

@ItsChrisAngeles Ай бұрын

I appreciate the helpful video! I'm curious about how you were able to insert the chin curtain. Did you need to remove the chin cushion from inside the helmet?

@h2otoad Ай бұрын

I did not remove the chin cushion. It's glued in really well. I just used a butter knife and an xacto to make some room for the fin of the chin curtain to fit. I also used a little spot of rubber cement to hold it in place once it's in. Hope that helps. Good luck

@ItsChrisAngeles Ай бұрын

@@h2otoadThanks so much!!

@JWLLMZ Ай бұрын

You have a link to the breath deflector?

@groggie 2 ай бұрын

Thanks for the advice, mate! I installed the same chin curtain and because I could not find a thick enough velcro tape, I used 3x6 mm 3M Seal/Sound dampening tape, wich I applied all around the faceopening. It seals perfectly and is even weatherproof. Now the Bullitt is as quit as it can get..at least like my Bell Eliminator. Thanks again, your video made driving with this helmet so much more enjoyable! Greetings from Germany

@noobcube48 2 ай бұрын

bell bullit ultra

@jackearl2398 3 ай бұрын

The back panel looks terrible !

@joancarles749 3 ай бұрын

Try covering the rear air outlet with adhesive, the change in noise is spectacular

@jayden1308 4 ай бұрын

Can you post a link for where you purchased the chin curtain and breath deflectors?

@calevel 4 ай бұрын

That’s a very well thought out restoration! Professional restoration is the rightful description!! 👏👏🤩

@farmboyfanGaming 4 ай бұрын

This doesnt work. Tried the velcro in the visor and it did not do anything. The real culprit is the vent at the top of the helmet. I tried covering it with tape first and the very loud wind noise was gone 99%.

@dukes83 4 ай бұрын

Awesome video. Thanks for the tips. Modded mine today and it made a world of a difference!

@linotaffoni2820 5 ай бұрын

Where can I find the anti-fog chin strap and nose guard for this helmet?

@tomje7024 6 ай бұрын

Hi, what brand is the chin curtain and breath deflector? Cheers

@h2otoad 6 ай бұрын

Sorry. Like I've posted several time here before, they are not a name brand, and I found them at a local store. I have no way to chase down who makes them. You'll just have to guesstimate what is out there that may fit and / or take only moderate modification to make fit... good luck.

@tomje7024 6 ай бұрын

@@h2otoad okay thanks for the reply!

@thephantomsrevenge3883 6 ай бұрын

The back exhaust vent is where I was getting all my wind noise. I just removed the liner and plugged the hole, now it’s very quiet. Initially thought it was the visor making noise but I was wrong.

@CourtneySultan 9 ай бұрын

i bought that same chin curtain but can’t figure out how you installed it in your bell bullitt. Did you have to do any modification of the plastic tabs or on your helmet? on mine, the tabs don’t seem to want to slide into that space on my helmet. Any help appreciated! 🙏

@CourtneySultan 9 ай бұрын

NVM i got it in with the help of a flathead screwdriver to pry open that space a bit but it worked. :)

@h2otoad 9 ай бұрын

I used a butter knife to open up a small gap between the helmet and the liner, then trimmed the tabs ever so little before pressing them in. Glad you got it figured.

@kendallbrackett7819 11 ай бұрын

So beautiful ❤️

@gcrichlow17 Жыл бұрын

what tool did you use to crave out a new speaker pocket?

@h2otoad Жыл бұрын

I just used an xacto knife.

@TheTeacherjenny Жыл бұрын

Thanks for this. Great ideas. How did you make the chin cover? I was thinking that would work for me. This helmet is great on my Moto Guzzi but terrible when I’m riding my Harley. So much wind my eyes water and I can barely breath.

@h2otoad Жыл бұрын

I just used an aftermarket chin curtain that I bought at a local motorcycle parts place. Sorry. I can't remember the manufacturer.

@tsundokus Жыл бұрын

if your still looking for a chin curtain that fits it perfect the one i use was "Shoei Chin Curtain Motorcycle Helmet Accessories, One Size "

@Ajibaskara681 Жыл бұрын

Drum=Bedug in mosque 🕌

@byopedro Жыл бұрын

I had the same problem with wind noise, however I found that by holding my arm on top of the helmet that it completely stopped the whistling., the same being if I tilted my head slightly upwards. So I can only put it down to the air extraction slit at the back of the helmet causing most of the whistling.I also velcro'ed completely around my visor instead of the helmet, which also helped a lot.

@docsmokyalian1397 Жыл бұрын

Hi, how did you hide the wires from the cardo controller with clip going inside the helmet? Thanks.

@h2otoad Жыл бұрын

I used a butter knife to separate some of the inner padding from the shell. Then stuffed the wire up between the two.

@momobaro5539 Жыл бұрын

Nice trailer …. And even nicer mullet !

@h2otoad Жыл бұрын

Mullet? I'm wearing a hat... thanks for the like though.

@riancambangay9210 Жыл бұрын

how did you carve the ear pockets?

@LaminarSound Жыл бұрын

Just bought this helmet on black friday. Got a great deal and it should arrive any day. Wondering if I shouldve been more patient and got something like the AGV X3000 or something quieter. Also, Im concerned with moisture entering through the vent holes. Im not sure yet how often I will ride in rain, but seems strange they didnt account for that.

@Patel-PoDi Жыл бұрын

Hi Todd, did you ever made a video of you installing the Cardo Packtalk Slim in your Bell Bullit? If not can you please help 🙏

@relevation0 Жыл бұрын

I can't make myself buy this overpriced helmet with all the wind noise. FIX IT BELL!

@melbajeanmeadlo8248 Жыл бұрын

Amazing job

@philwatson3646 Жыл бұрын

All I can say is WOW! Amazing job!

@h2otoad Жыл бұрын

Thank you. It's been a hell of a labor of love.

@thisaintsweettea Жыл бұрын

I've never really had an issue with wind noise with my Bullit, but the shell itself is loud. Tapping the shell, and even the resonance from my bike's exhaust, is so much louder than it seems like it should be. I assume this is due to the combo of the shell and the hard foam and very little softer materials to deaden the sound. I don't have the same issue with my Bell Eliminator or my Bell Moto 3

@JohnJohn-pb8zm Жыл бұрын

I have brought a bell bullitt carbon, which is the helmet I dreamed of because of its appearance. However, when I use it, there are too much wind go direct to my eyes! It hurts! Can I ask you for a suggestion? Velcro tape or the chin curtain is more important for reducing the wind going to my eyes?!

@h2otoad Жыл бұрын

I would do the velcro first. Then add the chin when you can find the right fit.

@JohnJohn-pb8zm Жыл бұрын

@@h2otoad thank you very much!

@jean-marcdejonghe5115 2 жыл бұрын

Just did your hacks and it completely changed my helmet! Thank you!

@jc_tobal Жыл бұрын

where did you get the velcro for the shield? tia

@twoblah1 2 жыл бұрын

you did an awesome job

@ivanbvillamil 2 жыл бұрын

Great video! Have the exact same helmet, and the noise is driving me crazy. I have even started wearing earplugs for noise. Could you share where you bought the chin curtain?

@h2otoad 2 жыл бұрын

I believe this is the chin curtain I bought. It's been a while, and I don't remember it, but I just found it in my list of item on Amazon. hope this works for you. www.amazon.com/dp/B0037NUC2S/?coliid=I3HHSQKXMFR5WM&colid=WZ8OLLO6NE1V&psc=1&ref_=lv_ov_lig_dp_it

@demetrioalbidrez684 2 жыл бұрын

Great work !! The clamp you used to hold the stave drum together can be made by clamping together large pieces of holes clamps . Automobile clamp holes ! Again Great work !

@59jaguar 2 жыл бұрын

Hi good upgrades. Where did you find chin curtain? Thanks

@dougm7744 2 жыл бұрын

Amazing build, Todd! Great use of the small space and such a tidy install on the electrical and plumbing. Your customers gonna love it

@tsh847 2 жыл бұрын

So glad to see you Todd! Beauty!

@freeagent66 2 жыл бұрын

Niceee!

@junglebrandingco 2 жыл бұрын

Looks freaking amazing! Outstanding work Todd!

@KemDIY 2 жыл бұрын

Yes! Been waiting for this. Amazing work!!!

@h2otoad 2 жыл бұрын

Thanks Buddy. Would love your help on some better photos. Let's get together for a beer sometime soon and talk about projects.

@lalo272 2 жыл бұрын

Is hard Ash??

@Nehodin 2 жыл бұрын

Hi! What is the chin guard on this helmet? Have same problem with a wind. Thanks!

@h2otoad 2 жыл бұрын

It's just a generic chin curtain. You can find them at places like Revzilla or on Amazon. I don't have a model number to share. I just looked around until I found something that looked like it would work.

@Nehodin 2 жыл бұрын

@@h2otoad 🙏

@milodickson1671 2 жыл бұрын

What Velcro tape did you use? Also would you be able to add links for all the things that you have bought if possible.

@h2otoad 2 жыл бұрын

It's just regular velcro from Depot. I don't have any of the links for the other products. I think I found the chin curtain locally and the breath deflector on Amazon.

@kwr6100 2 жыл бұрын

@bellhelmets have a look and listen ... fix your hat please

@ericlarsen7976 2 жыл бұрын

Amen!

@isaacbaker64 2 жыл бұрын

the dog at 2:40 i died🤣🤣🤣🤣🤣🤣

@gcrichlow17 2 жыл бұрын

How did you insert the breath deflector?

@h2otoad 2 жыл бұрын

It is the same as the chin skirt. It has some tabs that slide in between the shell and the padding. You may have to slide an xacto knife between them first though to cut through any glue that may get in the way.

@gcrichlow17 2 жыл бұрын

I went and found the same Icon Airmada, bit it looks to thick to fit into that slot. I used the same velcro that you used at the too of the helmet to stick it inside of the chin bar instead.

@gcrichlow17 2 жыл бұрын

got links to the deflector and skirt?

@kn7583 2 жыл бұрын

Where did you buy those accessories?thanks

@giordanino85 3 жыл бұрын

Do you think that a packtalk black would fit in it? Would you send a detailed video/pics where you show what you did on your helmet??

@TomSmith-hq1ok 3 жыл бұрын

These sound so cool! Are there any studio recordings out there?

@grazryan 3 жыл бұрын

Hi, what visor replacement did you use? Thankz

@h2otoad 3 жыл бұрын

It was a Bell replacement, bought through Amazon

Ең жақсы KZbin

Пікірлер