I got this when I got an entire box of my raspberry pi When I celebrated my 8-year-old's birthday

@livlos Can these be fitted to a guitar without routing out the body ,im looking to fit one for aesthetic purposes! Thankyou.

Your channel just popped up as I was interested in the SuperSwitcher. Does each bank save different pedals settings or SW only turns on or off for the bank presets? Thank you 😊

havent tried... dont see why not

can you connect strymon iridium(amp modeler) to super switcher? please reply thank you

You look like idiot my friend !!!!!!!!!!!

Your set up guidance is excellent, but your reasons are wrong. This trem is set up with the lock so if you break a string, you pull the trem arm down, engage the lock and the guitar returns in tune, so you can finish the song. It's a brilliant piece of design that fully caters to a professional musician.

Thanks helped me understanding my Squier CV 70's Jaguar whammy bar.

When locked, how much of that brass bushing actually gets under the lip? Mine only catches the very edge

Took.you an hour to get two springs off? Surely your kidding

This video is 7 years old and still the best offset tremolo setup video out there. God bless you.

I love you so much you’re my new favorite person ever

Any considerations if wanting to drop tune down to baritone, to B or Drop A on the low end?

nice video man! I'm looking for this pickup as well. could you used the same cover? I'm talking about spacing and size as well. Thanks 🙏

Thank you. You just helped me fix mine.

Man, i really appreciate your time, but holy cow, get on with it, didnt need the epic version

Cool Vid, thanx. I also want to switch the amp channels with ctrl1 & 2. Do you connect mono cables or TRS cables with the two ctrl jacks?

🤘🎸🤘 sick video I found one @ pawn shop for $550 just wanted a mustang with a humbucker upgrade from my P90 stang had no idea it was Signature model Cobain till went to studio. Alas did not come with Tremolo bar. If anyone knows the part # please reply.

Thanks for saving me the trouble of tearing my guitar apart to see what it looks like inside. This was incredibly helpful.

Thank you very much, only video that is truly helpful on how set up tremolo/vibrato system on JM

Thank you so much! I've successfully set up my tremolo system on my jaguar and along the way also found that my lock piece has a defect which is a pain, but I can live with it. Even with the spring piece completely disassemble and removed from the tail piece plate, the lock piece sometimes gets stuck in it's own edges cavity, it can happen when sliding to both lock and unlocked positions. When analysing the lock piece I realised that between it's top exterior part and the tail piece plate sits a double wave spring coil washer*, this washer is what causes the problem, the washer is somehow deformed and sometimes gets stuck stopping the lock from sliding. I thought about somehow disassembling the lock from the tremolo plate and replacing the defective washer. I found I am unable to disassemble the lock because it's bottom part (nut), the one that sits under the tail piece plate, has the bottom end of a screw inside it, no cavity for a screwdriver to fit in it and unscrew it from this end, looks to me like the head of the screw is the lock button itself, I realized no tool can unscrew the lock piece, it seems Fender wants it to be this way, I read somewhere Fender apllies a Loctite type compound on the screw threads, so it's no easy task. I did try to unscrew it somehow though, as both top and bottom (nut) of the lock piece are round, I tried holding both ends with pliers, used cloth in between not to scratch the lock, I know that doesn't help with getting a good grip, but I don't wanna scratch the parts, apllied a good amount of strength, but with very little grip it didn't unscrew at all. I found a workaround for the problem, when the washer gets stuck I spin the button with my fingers and eventually it's released and I can slide the lock button, until the next time it happens... It's difficult to jam your fingers between the strings and spin the button, but buying a new tremolo system to replace this defective one costs me about 109€, best retail price in Europe, I don't slide the lock button so often to spend this amount of money, so I'll continue spinning the button until the day I die! 🤣 *some older lock piece models seem to use a simple white colour, maybe plastic, washer between the lock piece nut and the tremolo plate, other models seem to have no washer at all.

Very interesting, i have the s2 singlecut but want to upgrade to a CE24, would that be worth the price?

I took my trem off and a black set screw fell off, not sure what it goes to ?

Man thanks a lot.. needed this and got it setup proper FINALLY. Guitar dude at local guitar shop was talking out of his is apperently cheers!

I have too many pedals. It's a shame someone doesn't do these to cater for say 20 pedals?

It's kinda sorta like a mini bigsby

I was worried when I can't remove the old tuners. (After remove the bolt) I watched this video. Successed 😂😂👍🤘 thanks

Thankyou!!

Do the presets also save what channel you have on?

Wow! Hands down, the BEST explanation of that trem system EVER. Every Jazzmaster/Jaguar should come with a link to this video. I’ve used Floyd’s for years and was never as intimidated by those as I was this trem. LOL I guess it’s because I can see what’s going on with the FR. As the proud owner of two Jazzmasters and a Jaguar…I’m now understanding how it all works. Thank you for taking the time to do this.

My jazzmaster came in the mail. The part where you put the term arm was scraping against the high E string. I physically adjusted it a little to the side by bending the arm a bit and it was good. Then, this morning I start playing my guitar and the trem is completely stuck. Took the whole kit off and the arm is like completely stuck and unable to turn at all,,,, helpppp

Thanks for this!

Nowadays the price of this beauty is skyrocketing...

Here's a question. I have an Am Pro 2, and when the vibrato tops out, it makes the click noise, when the 2 plates meet, I reckon. I have the vibrato lock engaged, and have it so I can dive bomb from E down to about A. Another video uses gaffer or duct tape in between the 2 plates to dampen the metal contact noise, but others say it's a matter of adjusting the vibrato tension screw. If it's down to how tight or loose the tension screw is, how much so, so that the 2 plates don't meet so forcefully, to make that noise?

You rock for this. Thank you!

(Sorry,is long) My plans for the future: Amp+Cabinet: Mesa JP2C (or any Mark series) with 1x12 mesa cabinet Now pedals (outside pedalboard/controlling manually): Two G1Xon,one for tuner and control the amount of input gain and the other to Whammy (down),Octave,Phaser,Swell,Eq,etc.... 1 Whammy 1 Wah In pedalboard and controlled by a switcher Drop Digitech Acoustic Sim Noise Supressor Tube Screamer Distortion And a Valeton GP200 outside pedalboard,but being controlled and in the FX Loop of the amp,just for the 5 Band Graph EQ,Compressor,Pitch Shiter (Kind of 12 strings sim),Chorus,Delay,Reverb So the signal goes: Guitar > 2 G1Xon > Whammy > Wah > *Input of the switcher* > pedalboard with all pedals in the switcher > JP2C with the channels controlled as well > Valeton in FX Loop > Cabinet The patches: Clean Channel: Acoustic > Valeton (EQ,Comp,Pitch,Chorus,Delay,Reverb) Clean Channel: Distortion > Valeton (EQ,Comp,Delay,Reverb) Crunch Channel: Noise Supressor > Tube Screamer > Valeton (Comp) Lead Channel: Noise Sup. > Tube Screamer > Valeton (Comp,Delay,Reverb) My problem is... I want a switcher that will be able to control all 3 channels,my pedals and the Valeton, with at least 8 banks so I can use the Drop in 2-8 banks, here in Brazil we have a switcher like this,with banks,four switchers for each bank,but there's no much info about it,idk how powerfull it is,if can control more than two channels,the valeton,etc.... so,can this switcher do these things?

I'm sorry to ask but do you have any advice on how to set up the Squier trem that doesn't have the lock? Just picked one up from Reverb and the trem wont pull upwards at all. The tension screw doesnt seem to do anything. Im aprehensive about taking it to bits.

So can I take out the spring if I don’t have a lock button. My squire Jaguar cv dose not have a button and I want to lock it in place . I don’t want anything floating. I don’t use trem bars on jaguars. Thank for the video.

I've seen other videos where a block was placed in the front as well as the rear. Wondering why you didn't. Did you tighten the screws on the bridge or is that unnecessary? Nice video thanks. I'll be checking out your complete setup.

Was the frets on your strat a bit low??? Like not so medium jumbo to me same strat ive had since 2018 dec. I dont know why the frets would be so low feeling like i feel the fretboard alot. I was told this is normal. Ive been playing on jumbos and medium talls on a cv and fusion t so maybe thats why. I dont know.

Hey bro. Hope youre well. Yeah i love the first 4 res evil games. Im looking into adding these soon.

Thank you, very helpful!

You are literally a fucking life saver and you don’t even know.

Thank you for this video

Oh man, you helped me a lot with this video. I was not aware of how the system worked. After playing many years with fixed bridges and only having played on a bigsby equipped guitar for tremolo effects I bought a jazzmaster, very happy with it... only something was buzzing on the tailpiece all the time... it was the spring which was to loose... so after seeing your video I could fix that! Makes sense!

Just bought a Johnny Marr Jag and this was super helpful. Thanks!

Mine was not working I took it apart and the spring was lying in the cavity I took it all apart hoping I can figure out how it goes back together. Here we go

How does it compare to a Mustang vibrato?

Is your bridge on the body? Or floating?