2 жыл бұрын
2 жыл бұрын
2 жыл бұрын
2 жыл бұрын
3 жыл бұрын
3 жыл бұрын
3 жыл бұрын
3 жыл бұрын
3 жыл бұрын
3 жыл бұрын
3 жыл бұрын
3 жыл бұрын
3 жыл бұрын
3 жыл бұрын
3 жыл бұрын
3 жыл бұрын
Пікірлер
@ychyro 20 сағат бұрын
hey everybudy! the QR code and link to the jog dosent work; any solution? cheers
@SethCNC 20 сағат бұрын
If you're on the same wifi network, than it should work. Chance the phone is not on the wifi? Or a sub-network rather than identical networks??
@ychyro 20 сағат бұрын
@SethCNC hey, thank you for the response! I'm at home connected to my WiFi, phone and pc 🤔
@jamesthomas883 8 күн бұрын
Great video thanks
@jerrylivers4481 16 күн бұрын
I am suddenly unable to connect to openbuilds jog wigit. Any ideas?
@saintespritco8645 28 күн бұрын
Am i the only one to have two audio tracks on top of each other during several parts of the video ? I have noted only the last one at 14:08, but it's all along the video for few seconds, which is hard to understand, especially for a french dude like me ^^' Nice video tho' ;)
@Chris-vc1dh 2 ай бұрын
How do I set speed and what is the TOOL slider for? Thanks
@SethCNC 2 ай бұрын
Tool slider is spindle rpm If not using a router... set which speed?
@Chris-vc1dh 2 ай бұрын
@@SethCNC the speed of moving the bit in the wood.
@SethCNC 2 ай бұрын
@Chris-vc1dh that would be referred to as "feedrate" and is set within the CAM software. What software are you using for CAM (to generate the gcode file)
@Chris-vc1dh 2 ай бұрын
@@SethCNC i use carveco maker
@SethCNC 2 ай бұрын
@@Chris-vc1dh your feedrate is set over there and saved to the gcode file
@TheBrightSounds 2 ай бұрын
This music is insufferable. Thumbs down.
@Cabbage1995 2 ай бұрын
Hi Mate, is there a way to have easel carve top and bottom of that model (by flipping the wood after doing the top)?
@SethCNC 2 ай бұрын
Yes, alignment is key though
@Sailingon 2 ай бұрын
I always feel sad when i find a good youtuber and they have stopped uploading.
@georgedecker4756 3 ай бұрын
Hello Seth I am a novice cnc operator and I am having am issue with the second carve on a 3d carve thanks George 9/15/24
@777smitty4 3 ай бұрын
Can anyone give advice I want my program to activate a m3 then m5 every time it reads the m5 command
@Chris-vc1dh 3 ай бұрын
Is it possible to cut a plug (set of letters) for inlay rather than each separate letter?
@SethCNC 3 ай бұрын
Sure, just create an outer shape and pocket that but don't not the letters, leave them set to 0 depth... you may need to use offsetting and layering to get the desired results. But it's definitely possible with easel
@Chris-vc1dh 3 ай бұрын
@@SethCNC is it, so that the machine will mill everything but not the image(letters?)
@Chris-vc1dh 3 ай бұрын
@@SethCNC just trying but cant put letters on top of anything, have you got a video i could follow on that? thanks
@Chris-vc1dh 3 ай бұрын
How do you zoom in ?
@SethCNC 3 ай бұрын
@Chris-vc1dh easy way is shift (or ctrl I forget which) and the mouse wheel.. Or use the button at the top right to change from selector to zoom, but you gotta keep changing back and forth, so use a mouse with scroll wheel
@Chris-vc1dh 3 ай бұрын
@@SethCNC thanks, just trying to play with my 6050 as inlays interested me a lot, if I put object in the middle of material in car eco should it be in the middle in open builds too?
@SethCNC 3 ай бұрын
@Chris-vc1dh the gcode and thus openbuilds display will only include the toolpath. So if you used center ad x,y zero point then the design will be centered in openbuilds, but if you used a corner for example then no, the toolpath Will start and finish at that corner, thus including that within the toolpath while the opposite corner will be omitted from the toolpath... causing openbuilds to show offset and not show that other portion as it is irrelevant since the tool will never travel over there
@Chris-vc1dh 3 ай бұрын
@@SethCNC I just put letter K in centre of my wood in carveco and Z Y is in left lower corner Does material size go in gcode?
@SethCNC 3 ай бұрын
@@Chris-vc1dh no, only the toolpath
@johnprosser2142 3 ай бұрын
When I export my G code and go to run it on my Genmitsu 4040 Pro through UGS it says my spindle speed is zero, any thoughts please?
@SethCNC 3 ай бұрын
Sounds like the machine wasn't setup quite right in easel.. Go to machine>edit machine and set to hardware and "other" spindle type And you can set the spindle rpm in the cut settings panel on the right.
@johnprosser2142 3 ай бұрын
@@SethCNC thank you so much for getting back to me and so fast! I shall give that a try!
@oussemaarfi 3 ай бұрын
Hi Seth, I have a problem and need your support please. I have a cutting machine that uses a CNC software that requires a keyword to use the software that I do not have. My question is; is it possible to delete the software that the machine is using and install another one similar to it?
@SethCNC 3 ай бұрын
No, sounds like your cnc is either a Mach controller or some other proprietary controller similar to that used on the shark brand cnc machines...what make and model cnc is this?
@polynour821 4 ай бұрын
what is software used to draw 3d and software to get gcode
@LifeLens-om4wz 4 ай бұрын
It didn't work I watched the video over and over , it cut out the depth but when i went to change the bits to carve the face it didn't work. :(
@SethCNC 4 ай бұрын
@@LifeLens-om4wz which model cnc. Can the vbit reach your wasteboard?
@LifeLens-om4wz 4 ай бұрын
@@SethCNC I have Genmitsu 4040 pro, I've cut out the inside and when I changed the bit it didn't go to the bottom it was carving in the air. I don't know what I did wrong when setting the carving depth for the face.
@gregmacintyre3646 5 ай бұрын
Seth My Z axis is cutting deeper than my file indicates?
@tfsbuilds93 5 ай бұрын
Great tutorial! Thank you for this!
@PierreSmit-f9c 6 ай бұрын
HI. i have just changed my XPro V5 to the Openbuilds controller and limit switches. I have managed to calibrate my machine (Bulkman 3D Ultimate Bee 1500 x 1000) but I am not able to get the limit switches to work at all. Please could you help me to activate them in the software.
2 ай бұрын
did you get this sorted out? i have the 15x15 ultimate bee and have it working.
@johndiego3105 6 ай бұрын
Does the free trail include the foxalien 4040xe
@SethCNC 6 ай бұрын
Free 90 day trial is the same as the paid version, so yes, use "grbl" post processor for your foxalien cnc 👍
@davedayton 6 ай бұрын
I would love to see a probe tutorial. I have a simple gemitsu 3040 controller and triquetra 3 axis probe plate
@SethCNC 6 ай бұрын
It's a kinda long livestream, but I go over setting up an xyz probe here kzbin.infovVe7fRV7b-E?si=waOcdRUKeNJydwEh
@vinodart2617 6 ай бұрын
CNC hot wire machine kaise khariden
@vinodart2617 6 ай бұрын
Is machine ko kaise purchase Karen
@roberthosking7524 7 ай бұрын
I'm using open builds to operate my homemade CNC table with a MKS DCL v2.1 card. Everything is going smoothly so far. My control card has built-in Wi-Fi and I'm wondering if you could tell me how to enable it using open builds control? Thanks.
@kidvicious2227 7 ай бұрын
I'm not seeing the union on esael
@SethCNC 7 ай бұрын
You used the exact same search term shown in the video?
@aalexisa14 7 ай бұрын
Can you please explain that interior perimeter scoring? Would that be right the bit also?
@roberthosking7524 7 ай бұрын
Being a first-timer to hook up a control card and a stepper driver to a home built CNC machine I have to say this video made my day. I plugged in my MKS DLC 32 version 2.1 card after installing the software, hit the jog button and was delighted to see the axis move. I used open builds cam software and was trying to figure out how to install grbl to control my machine. I meant to check out open builds control but totally spaced it out. Super happy I came across this video. So far I like everything about open builds. I've ordered parts from there. They responded to my questions. And their software is great. I look forward to digging into this open builds control software and getting my configurations correct. Thanks again. Subscribed.
@tarunit500 7 ай бұрын
i will buy this machine please contact
@Juancho7 7 ай бұрын
This guy has a lot of knowledge about these cnc programs, there is no doubt about that, but his videos are very boring, he needs fluids.
@SethCNC 7 ай бұрын
Lol, thanks, all engagement is positive engagement 😆😆 I'm thinking about getting back unto making more tutorials, now in a completely different head space than before, hopefully more up-beat and lively... 🤪
@timmyers8307 8 ай бұрын
Just a word of advice. Maybe you should rehearse your videos first. You are regularly distracted and fumbling around with your tech. It makes it extremely difficult to watch an hour video that for all intents and purposes should be 20 minutes.
@SethCNC 7 ай бұрын
You're right, however for a couple months I was doing weekly livestreams... with a live audience and replying to their questions throughout... this video is one of those livestreams, and I'll admit that I'd do a quick run-through of the topic the day before to make sure I got the important things covered during the tutorial part... but you're right that the tech and the live audience is distracting... kinda why I stopped doing it ..
@stephensharron4117 8 ай бұрын
Can this be used on 3018 pro cnc
@SethCNC 8 ай бұрын
Yes, works with all grbl controlled cncs
@NFOsec 8 ай бұрын
Best to take down a deprecated machine/website link. I'm not sure what happened with FoxA, but sad to see they dropped this. I've already staged up a 1000mmx1000mmx1000mm caged Foam cutter myself and have been very happy with the results.
@chuckanthony6815 8 ай бұрын
Im planning on building one around that size. Did you build it from plans?
@one.crafty.mother 8 ай бұрын
I spend a million years screwing around with my 60°. I swear I've been using the same bits for 6 years now and it still crushes my souuuuuul! Any tips you have for that?? (The 1108 Amana 60°)
@one.crafty.mother 8 ай бұрын
Obviously, pun intended
@dy8512 8 ай бұрын
Thank you. Good stuff.
@idropshottv648 8 ай бұрын
What about the $132? Default shows 152.4 mine seems to be $132=100.0 What is that one for? and should i change it to the default from inventables?
@idropshottv648 8 ай бұрын
I believe yours is the same. different from the defaults.
@WendyBurwell 9 ай бұрын
You said a compression bit... specifically which one?
@SethCNC 9 ай бұрын
I use spetools bits mostly, because they are the least expensive out there.... (I also get a comission, but I've been using them for a year before they offered me the commission deal, if you can get less expensive elsewhere try those instead check amazon) spetools.com/products/spetool-w02008-spiral-compression-router-bits-1-8-inch-dia-1-8-shank-2-long?ref=SALE
@KeimpieceCarpentry 9 ай бұрын
I'm having issues with inconsistent z height. I've been using the x carve for many years, not new to it. It's not the issue your describing because I've already checked that. Work piece is surfaced, brand new surfaced waste board, bit isn't slipping, all the variables have been covered. It only seems to happen on the detail pass with a v bit when there's a lot of required up and down movements of the z axis. sometimes it goes too deep sometimes it goes to shallow, by a significant amount, floating 1/8 above the surface not even touching. I've been going back and forth with support for months. They sent a new Derlin Nut saying there was a faulty one on some of the upgrade kits. Who knows. The tension screw on the bottom of the new derlin nut that came is lose, no lock tight, the nut is free spinning and the hex screw isn't even touching the opposing side, so there's no specific setting to it, it's not serving any purpose right now. Prior to it arriving I was told by support not to adjust that screw that it's preset to a specific tension. But obviously it's not preset to anything which now has me worried this new derlin nut won't solve anything. Any ideas? I purchased the upgrade kit about 9 months ago, never had issues before then over years of use. This issue is definitely tied to something with the new upgraded z kit.
@frankhovis 9 ай бұрын
You have a very deep voice, considering what you look like in the thumbnail.
@SethCNC 7 ай бұрын
🤣🤣🤣 I may have borrowed a stock image for the thumbnail
@kcnrj29 9 ай бұрын
That saved me a lot of time thanks!
@matthewjason5330 9 ай бұрын
thanks
@davidshives1030 10 ай бұрын
OK, yo introducing the 3D builder tool has solved a problem I've had for like 6 months now. Thank you, Seth!
@romaharashov1471 10 ай бұрын
hi, your video turned out great! I’ve had the machine for less than a year and everything was fine, I adjusted the string tension, temperature and speed. all was good. But a couple of days, in places where the string passes simultaneously along the X-axis and the Y-axis, small waves are visible on the cut material due to the fact that the string vibrates. square shapes cut fine. but on rounded forms a problem appears. maybe you can tell me how to fix this?
@richardgrant4231 10 ай бұрын
New to this I’m trying to connect to my arduino the wizard says hold down the mode button and then the reset button where do I find the mode button
@brentncindy9023 10 ай бұрын
Connect 4?
@SethCNC 7 ай бұрын
Correct!!!
@robbie6625 10 ай бұрын
I'm not sure why Amana didn't include a more positive indexing feature. One of the advantages of inserts is that if they chip or break, they can can be quickly replaced without needing to adjust anything on the machine. This just seems like a lazy design by their engineers. Didn't get me wrong, I love the cut quality I get from mine, but there's no excuse for such a (usually) amazing company to have such a fiddly tool.
@jl3415 10 ай бұрын
Hi, great video dose open build support 4 axis?
@DavidtheSwarfer 10 ай бұрын
Yes, with the grblHAL based Blackbox X32 or similar controller
@danielwolinski6362 11 ай бұрын
bla bla bla blaaaaa nuda
@barbiegirl102986 11 ай бұрын
what kind of cnc do you have? I'm looking to get one maybe a queen b.... not sure
@SethCNC 11 ай бұрын
The one in that clip is the original workbee from early 2020.... purchased before the queen and ultimate bee were developed. If it were to purchase new again today I'd get the ultimate bee.👍
@barbiegirl102986 11 ай бұрын
@SethCNC yes, that's the one ci was looking at! thank you!
@aarong402 11 ай бұрын
I just found this video and went and checked my settings and they were wrong. Makes sense why when I would move my z axis up and down it almost had a grinding noise. Once I changed that setting that noise went away and it moves much smoother. Thank you for all of your videos as I am just finding you on youtube. I have some more to watch now.
@dustynweaver7594 11 ай бұрын
Hey, can anyone explain why the z zero at 34:36 was set to the top of the spoil board and not the top of the material?
@SethCNC 11 ай бұрын
Hypothetically, IF i had measured the material incorrectly or entered the incorrect thickness, Lets say that I measured and entered it as 0.75" when it was actually 0.73" then a portion of my 3d carve would not get carved.... SO when doing the 3d carve I use TOP as my Z zero point. For the CUT out I use the bottom so as to not damage the wasteboard more than necessary. BUT IT you always measure perfectly than using bottom for both would be fine.