Do you know the size of the locknut? I have the same mower and can't find the right size replacement and it doesn't say in manual.
@accidental_relevance2 сағат бұрын
15mm is the socket size to remove the blade
@JoshHarris-wm5mt7 күн бұрын
U didn't show how to install it dick weed
@accidental_relevance8 күн бұрын
UPDATE: This process did make the car run better, but a crack in the flexable rubber intake tube between the MAF sensor and the intake manifold was what caused the fault code. Replacing that tube solved the issue and the idle is now very smooth.
@phutton889 күн бұрын
Star struck by a corporate puppet?
@joebakkus19 күн бұрын
Can I use WD-40 to clean it?
@accidental_relevance8 күн бұрын
I think that would be alright. Let us know how it works out.
@boxedluunch16 күн бұрын
I appreciate the help . Got my grandpas weeder going after this . Thank you !
@accidental_relevance15 күн бұрын
I'm glad you found it helpful
@ceciliagutierrez138916 күн бұрын
Where did you buy it from???
@accidental_relevance16 күн бұрын
Lowe's
@jerrycorp363217 күн бұрын
This thing is garbage… the string system is the biggest piece of trash… needs a redo
@barbarayajkoprice508018 күн бұрын
Thank you!
@julianamjkim772919 күн бұрын
its effing impossible to uncouple the filter cartridge. I hate it
@SonicBoomC9820 күн бұрын
Mine has done well for me, but I'm thinking of changing mine for for one thar can handle more rhan .095. I've experimenting with the line that's smaller than this one to see which one spins better and gets caught up less.
@accidental_relevance20 күн бұрын
If both machines have the "Expand It" feature, comparing the two lines will be as easy as swapping the heads on the trimmers.
@SonicBoomC9820 күн бұрын
@@accidental_relevance I accidentally used heavier line once and it wasn't spinning well. I just wonder if this one doesn't have enough power
@accidental_relevance18 күн бұрын
@@SonicBoomC98 yeah apparently the size of the line is a pretty big deal. You wouldn't think it would make that much difference, but it can make the motor overheat if the line is heavier than recommended.
@johnrichards67429 күн бұрын
I hate this trimmer. I've been trying to put the head back into the locked position and it will not lock. Two hours of my life, gone on something that should have taken 5 minutes. The head just will move from the unlocked position to the locked position.
@accidental_relevance28 күн бұрын
It can be a little cranky. But the more you do it the easier it gets
@zextorp622729 күн бұрын
Still not connecting sir what to do!?
@accidental_relevance25 күн бұрын
If this doesn't work it must be defective
@72bableАй бұрын
The hole in the end of the auger is to bolt the cutting bit on. Glad the ground was soft.
@accidental_relevanceАй бұрын
Thank you for responding. Do you have a video that shows the cutting bit in action?
@trainurk9Ай бұрын
OMG I was having a heck of a time getting my base for the post into the ground. I was using the wood and hammer method and it was taking forever, like it was stuck on a root or something. After contacting the company (not real helpful tbh) and then watching your video, I found a piece of rebar that I used to hammer the post base in! So happy I found your video! Thank YOU!
@accidental_relevanceАй бұрын
Thanks for watching. I'm glad you found it helpful. This fence stood up to a 100mph wind last year so it's pretty sturdy and I think it looks great. It's been helpful several times to be able to disassemble it and reinstall it in just a few minutes.
@hakimlavang2512Ай бұрын
Sir, you are my hero! Thank you for this very informative video!
@accidental_relevanceАй бұрын
Thank you for watching
@caduceus33Ай бұрын
Thanks for the help! Person at the hardware store took the head apart and couldn't get it back together. After seeing your instructions, I was able to get it back together and make it work!
@accidental_relevanceАй бұрын
Awesome. Glad it worked out. It gets easier the more you do it.
@ChuddddАй бұрын
This was very helpful than you
@accidental_relevanceАй бұрын
Thank you for watching
@ozzy5146Ай бұрын
If there is string in it, you can't see the light through it.
@accidental_relevanceАй бұрын
That's a good point
@r.louiseworley-parsley4208Ай бұрын
I have one on the vine right now that will not be as large, but it is a beast in the central Texas heat.
@accidental_relevanceАй бұрын
I have a couple that look pretty good this year. I just need a little luck 🍀
@AO1989USAFАй бұрын
Thank you
@patriciabroussard56962 ай бұрын
What is the name of the melon you grew and what type of fertilizer did you use?
@accidental_relevance2 ай бұрын
All the seed stock I've used has been from melons that I bought at the grocery. Except for one package that I bought several years ago, and I don't recall the type of that seed other than just Honeydew. I've used Sta-green fertilizer and magnesium-sulfate to stimulate growth.
@Swizzelsticks_xX2 ай бұрын
I watched this video over a year ago and now I'm watching it again. I thought I subscribed the last time , but I definitely did this time. I'll let you know if it fixes my fan.
@accidental_relevance2 ай бұрын
Thanks for watching and subscribing. I hope it works well for you.
@timu.7102 ай бұрын
What is the wind tolerance on this type of fence?
@accidental_relevance2 ай бұрын
Well that question is a little above my pay grade 😁 But I can tell you that it survived a pretty severe windstorm last year. Here's a video of some of the damage our neighborhood received, and you can see at the end of it that the fence is still standing kzbin.info/www/bejne/ep3PoKCKq66bfassi=ttVmsEd9wKKfXIWy
@2bonosc2 ай бұрын
“Just a little twist”, Horse Hockey!!!! I had to use an oil filter wrench and a pipe wrench to get it off then couldn’t get the whole thing back on…
@accidental_relevance2 ай бұрын
It can be stubborn sometimes
@nygelbruce44342 ай бұрын
Where is the installation procedure
@accidental_relevance2 ай бұрын
I had a deadline to get this installed, so I wasn't able to make a very detailed install video. But it's pretty easy to figure out really.
@dfield622 ай бұрын
I’m trying to remove the head so I can put a new head on, but I can’t take the old head off
@accidental_relevance2 ай бұрын
It's stubborn sometimes. It'll be easier after you do it few times.
@wordgardener12 ай бұрын
I love your sound effects and did not have any idea I had the dang expand it model til you did that haha! I also was able to load the stringer in two minutes including opening the package. So I took an extra sixty seconds to say thank you! I’m a huge ryobi fan too🥂
@accidental_relevance2 ай бұрын
Thank you for watching. I'm glad you found the video useful. Some viewers have said that the head-cap is easily removable if done before the first use, so it might be a good idea to put some lubricant on the mating surfaces at that time for more easy removal later.
@dfield622 ай бұрын
I’m having problems taking the head off for replacement, plz explain
@accidental_relevance2 ай бұрын
It just twists off. It's difficult to remove after it's been used for a while so you might have to really work at it, or you can gently pry the mating surfaces apart. Just be careful not to damage it. I use grip-gloves when I'm removing anything that twist off.
@rosielorenat2 ай бұрын
I cant locked back 😢
@user-ip4xg4xm7f2 ай бұрын
“Ned Beatty Syndrome”!!! 😂😂I don’t think anyone else got your reference. Squill like a pig!
@accidental_relevance2 ай бұрын
You have to be of a certain age to appreciate it 😄
@mikemurray7262 ай бұрын
Use the tool lol don’t be one
@accidental_relevance2 ай бұрын
I thread mine with the head facing up toward as shown. So for the tool to lock onto the threads properly the winding handle faces down. Which seems awkward to me. I think wearing a glove is about as easy. Plus, if it's lubed up it spins easily anyway.
@johnnyhstanley2 ай бұрын
This video was NOT helpful. I was looking for some help on how to take that mass air flow sensor off and you didn't even show that...👎
@nickcosta54042 ай бұрын
Absolutely useless video
@nickcosta54042 ай бұрын
Doesn't even show u how 2 get the doors in which is the hardest part fyi
@EileenThomas-lm1ho2 ай бұрын
I still can't unlock the head. Is there a trick to getting it to unlock?
@accidental_relevance2 ай бұрын
Some people have had good luck with prizing the edge away in a complete circle around the head, to break the hold the two pieces have on each other.
@StephenMattison662 ай бұрын
This video should have been one (1) Minute, max.
@user-yk2mf5ge5o3 ай бұрын
Thank you. Mine just ran out of line and I was terrized on what it might take to rewire this. Wow never thought it could be this easy. I did what you showed and it worked perfectly. My line didnt have any markings on it but all you do is keep feeding it until both ends are equal length then start turning the knob. PS Since your giving kudos to Ryobi I should mention for others, my string trimmer is a replacement for a gas powered Poulan and I finally got tired to try and get started, mix gas, oil the whole thing. The reason Ryobi is they do accept other attachements. I had an edger, a string trimmer and a blower and they all work with it so the new electric trimmer for 189 at homey depot was worth it since I had all the other tools already. When I finally give in to the electric mower it will be a Ryobi as well because the batteries are the exact same for the mower as the trimmer. Again thanks for the help.
@accidental_relevance2 ай бұрын
Good information, thanks for sharing that. I knew some Homelite products would interchange. It just makes sense to keep using things you already have on hand.
@areituАй бұрын
I have the 40v Mower and it's nice to use
@jsimmons46433 ай бұрын
With a bit of a struggle, I got mine unlocked. I replaced the line just fine, but I cannot get it to lock. Any suggestions? I have owned numerous trimmers but I've never had this type of issue before. Contemplating returning to Home Depot if I cannot resolve this.
@accidental_relevance2 ай бұрын
Several people have mentioned this issue, but no one has shared what they found out. It's really difficult to see the locking mechanism up inside there, but I would think a locking tab has broken off somehow. Probably will need to be replaced.
@jsimmons46432 ай бұрын
Thank you for your response. It doesn't appear anything is broken, but that could be the reason why it was difficult to unlock and will not move back into the lock position. I purchased this trimmer less than a month ago. This is the first time the line needed replacing. If the locking mechanism is fragile to the point that it would malfunction prior to initial unlocking, this is clearly a serious design flaw. Ryobi and Home Depot should concede to this flaw and replace the head or entire trimmer.
@accidental_relevance2 ай бұрын
I've taken mine apart. There are four tabs that go up into some slots. I just can't see what holds the bottom piece in place.
@misterx85923 ай бұрын
Do not quit your day job…
@accidental_relevance3 ай бұрын
Okay but this is my day job 😁
@misterx85923 ай бұрын
Poor video..
@accidental_relevance3 ай бұрын
Here's one on the same topic you might like better: kzbin.info/www/bejne/bHbZgJuMnNKgjrMsi=obnx-xVIJkRXNm80
@annamberteaster32313 ай бұрын
Expand itttt❤
@accidental_relevance3 ай бұрын
Words to live by
@annamberteaster32313 ай бұрын
Love the sound affects and the cat 😄😄😄
@accidental_relevance3 ай бұрын
The cat appears every time the camera comes out 😆
@ntmd8or1003 ай бұрын
I got my line replaced, Thanks. But I have another issue. Maybe you can offer a suggestion. I haven't used the trimmer since last year, and when I replaced the line the trimmer would only run on high speed for 2 seconds at a time then stop. I tried 4 different batteries and it does the same with all. One battery was one from the charger that I had just mowed with. I doubt the battery is the issue. I can run it longer if I hold the button to about half speed. but when the trigger is fully depressed it will stop after 2 seconds. Any ideas?
@accidental_relevance3 ай бұрын
I'm not a technician, but that seems like it would be an issue with the trigger switch. The tool dept guys at HD might have a fix or know where to get it replaced.
@ntmd8or1003 ай бұрын
@@accidental_relevance They say they don't work on electricity here. Lol But tgat was my thought.
@accidental_relevance3 ай бұрын
@@ntmd8or100 here's their customer support page: www.ryobitools.com/help-plus
@ntmd8or1003 ай бұрын
@@accidental_relevance Thanks
@heathercarter97413 ай бұрын
Thanks! You helped me fix my favorite fan :)
@accidental_relevance3 ай бұрын
I'm a big fan of this fan : )
@zakkbekolay42793 ай бұрын
How do I get it back on?
@accidental_relevance3 ай бұрын
Just line of the arrow and twist it back on the oposite direction
@zakkbekolay42793 ай бұрын
@@accidental_relevance yes eventually got it, greased it a little and put it in a vice and worked it in to get use to moving, and now it’s much easier.
@robertduncan27423 ай бұрын
I have the original unit that extends once releasing the trigger then speeds up, I haven't liked it to well but a change is coming, my motors at the bottom so 8ne unit will be changed abd the other will have the wire unit
@accidental_relevance3 ай бұрын
I still use the head that came with my old Ryobi gas trimmer. That way I always have one loaded and ready to go. That's the advantage of the, Expand it ! feature.
@abc123applemo23 ай бұрын
I've noticed you reply to new comments still, and my cousins came over and took the head off but for some reason, it's impossible to lock it back into place. I'm literally giving it all I got and it just won't twist to the lock position. What am I doing wrong?
@accidental_relevance3 ай бұрын
I couldn't really see what catches the four tabs that have to fit up into the top piece but it might have been damaged when you removed the head. Fortunately, you can use any head that's compatible with the, Expand it ! feature.
@vinniedisco73 ай бұрын
I align the arrows and it won’t pop off. It’s stuck.
@accidental_relevance3 ай бұрын
You might have to carefully pry it apart a little
@rickkrockstar3 ай бұрын
Glad I read the instructions...,🤓😂
@zackariah81203 ай бұрын
For some reason the line doesnt feed in when I twist the bump knob
@accidental_relevance3 ай бұрын
I can't imagine why it wouldn't if the line is through the head. I'll have to take it apart and get back with you
@zackariah81203 ай бұрын
@accidental_relevance i was finally able to get it to. Not sure what the problem was lol
@accidental_relevance3 ай бұрын
@@zackariah8120 that was my experience as well. I did exactly the same thing that had NOT been working and it suddenly worked. I get a little grief from viewers about not showing what I did, but I didn't do anything different 😄