Can i drive car with code P2402 on?

Thanks for this video brotha! Just did this on a 2022 atlas cross sport and I had it done in 30 min.

What model scanner you using?

Change the sensor nd it was the sensor

Dude no

Olá tenho uma maquina dessas da para fazer o backup up anterior da FEM fiz coding mas não ficou como queria será que dá para fazer back up das codificacoes? Obrigado

We need to invent a catch-screen or paper- coffee-filter-like to attach to the exit end hose to show evidence the flush was successful by catching the debris for examination. A coffee filter rubber banded or zip tied at the exit could reveal a lot during the flush process. The hole in my idea is exactly that. I expect the pressure of the air would rip the coffee filter to shreds therefore a metal screen would be necessary.

I have a 2012 Optima SX turbo and it does the same thing. The way around it is to start the car, run it for a few minutes, turn it off and start up again. It moves the pot to the correct position and no more turbo limp mode. I have also seen it on a 90 degree day it will act normal.

Toyota should be ashamed of this garbage engineered piece. Basically rebuilt my front suspension-inner/outer tierods, steering knuckles, sway bar endlinks, and just finished replacing the coilovers too. And still this rattling. Finally came across this after a month of searching vids. Other than an engine rebuild, i have a new car.

TAKE OUT YOUR GLOVE BOX ' NO TOOLS AND ITS RIGHT IN FRONT OF YOU . I TOOK MINE OUT IN LESS THAN 5 MINUTES . LOTS OF VIDEO ON HOW TO . NO NEED FOR ALL THIS NIGHTMARE .

What other tests dis you do to rule it was the pcm.. I’m having the extra me problem

Replaced and noise is completely gone Thanks again 😁👍👍

Thanks for the tip about the denatured alcohol.

Damn that’s a lot of work for that tiny freaking part. Yikes I’ll just turn the radio up then, that’s what I hate about these new cars is how reliable they may be but have little things like this that aren’t so simple to change

Mine sounds like Garggling noise

I think I’m having this problem

Fuckin pos GMC!!!!! Replacing the head isnt an option people dont got thousands of bucks sittin around🙄, these GMC engine are simply shit. All I wanted to do was change my damn spark plugs

Good video dude. Hope this is the same on 2010 Acura TL.

It also seems to be a lot toyota 😡 recall it not right .

Alguien me. Puede desir como se llama esa pieza

My 2010 Corolla LE with 126k, has an AC issue. Turn on the AC on a hot summer day even all the way on high setting and it blows warm air for five minutes. After five minutes i can feel the cool air starting to blow. My mechanic replaced the AC refregeriant but doesn't resolve the issue with the delayed cooling. So I looked up the Dorman flow sensor 926818 and it's not compatible with the 2010 Corolla. I searched and there doesn't seem to be a flow sensor for the 2010 Corolla. Any suggestions?

My 2010 Corolla LE with 126k, has an AC issue. Turn on the AC on a hot summer afternoon day in South Florida even all the way on high setting and it blows warm air for five minutes. After five minutes I can feel the cool air starting to blow. My mechanic replaced the AC refregeriant but it does not solve the issue.. Will replacing the A/C flow sensor solve my issue? Also, is the voltage for the sensor the same for the Corolla? I looked on RockAuto and they don't seem to have a flow sensor for my 2010 Corolla. I find a Electronically Controlled Compressor Control Valve. Is this the same thing?

You let someone drive your car and this is how they repay you?! SMH

Many small parts are so cheap taking apart these things is all about patience and practice. Ive learned so much by watching videos like this saving me thousands of dollars last year.

Can you please explain what the AC system, clutch, or AC compressor have to do with the air intake?

😮😮😮😮 My flow sensor reads 4.37V when the ac/fan turns on but once the fan shuts off; the ac stops working....blowing out warm/hot air. With the ac not blowing cold air; it still reads 4.37V. System was just charged also Any ideas/advice?

Wish you showed a part number or where it’s located. 😕

Same problem and upon check almost identical rip with my 2012 civic. This must be happening while filter change and the hose becoming brittle over yeas. Thank you for the video. I will subscribe for more great content!

I not know what size but I go Amazon I types my car model and I get o ring

I not know what size but I go Amazon I types my car model and I get o ring

The Flow Valve is another common Toyota issue. In that case the coolant has to be properly removed. That one can be a bit more difficult first to get to it and second to get it out ( they sort of corrode and become stuck ). There’s also a C clip ( another pain in the butt ). Toyota also doesn’t sell just that part they want you to buy the whole compressor. One other thing that sometimes pops up is the AC Expansion valve. The last and relatively easiest fix could be the AC Relay but I would think that nothing would work on the AC if that was blown. AC coolant doesn’t just disappear, if you are low on it you probably have a leak.

will the Dorman 49456 part work. also thanks again

If the code is for left front ABS, why are you working on the RIGHT FRONT?

I would've never thought it was the issue. But jeeze, what a mess to deal with.

You are the MAN! Thank You So Much! for showing all of Us how to install and Also the part number, great job love ya brother. you saved me!

I was thinking my BMW AC leak was the evap coil. But how to make sure. Was playing with the grand kids one night and as I was showing them the UV flashlight in the driveway.........BOOM! Evidence of dye exactly where the X5 had just been moved from. I'm thinking most materials that can handle the water leaking from that drain tube and can dry out later will give one a good indication of an evap leak. The dye will remain after the water has dried out. It looks washed out........but where else would that dye come from.

Nice fix

Would this bushing work for a 95 Ranger 2.3L

Mine jerked and bucked just like that. Checked the hose on my 2015 Civic and it was ripped pretty badly. Got a new one from Napa and put it in and it accelerates smooth now and also has more power. Very helpful video.

Great Video! Can I flush a condenser on ab Audi TT from 2000?

Hey boss if this dampener is bad would it also casue alot of play in the steering wheel ? tie rods control arms and ball joint all seem tight

It’s normal to have a little bit of decrease/increase when turning ac on/off, due to the strain/load this puts over the engine

should have been a recall

Thank you man, I was thinking it’s u-joint. But this is eye opening 👀 I wish if you showed us the steps how to drop the assy. I got Prius Plug-in 2014. the noise is disturbing and I removed the tire and was checking the shaft, rack & pinion, and the joints. But now thanks to you my focus is on that little trouble maker. Thank you once again.

This just happened to my 2004 mazda b2300 today, when I typed this part number in on oreillys it says not compatible with my truck, is there another part number used for this fix. thanks

great video

After going to many auto shops to get the same issue replaced with pricing starting at $679 thur $1085 labor only. I was able to replace it with help of my daughter’s small hands from underneath. Yes due to the very limited space it did take me about 7 hours. I was only able to turn the screws 1/4 at the time. I used an extended 1/4” drive, 90 tooth ratchet, I also used a 1/4 drive sidewinder ratchet I modified the handle to add more reach. I have to be honest I will never do another one.

Need to lot things to learn !!!!!!

Can you plz what is this part name

Just use Gates or SKF water pumps & belts. I've never had a failure in over 3 decades of hard & long road.